AXAGON HUE-S2B 4 Port Superspeed USB-A Charging Hub Instructions
- June 6, 2024
- AXAGON
Table of Contents
AXAGON HUE-S2B 4 Port Superspeed USB-A Charging Hub Instructions
Instructions for use (original)
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/hue-s2b#supportLinkGoal
Four-port SuperSpeed USB hub with charging function
© 2020 AXAGON
All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon.
- Turn on computer.
- Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready
INFO
Any USB charger and a suitable cable with a micro USB connector can be used for external power supply of the hub (recommended charger output current is 2A).
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0
5000 • 480 • 12 • 1.5 Mbit/s (Super • High • Full • Low Speed)
USB Type A male connector
30 cm FIXED USB CABLE
OUTPUT INTERFACE
4 USB 3.2 Gen 1 ports with USB Type A female connectors
POWER SUPPLY
power through USB bus – up to 1 Amp CHARGING on USB ports
power through optional power adapter (5V/2A)
– up to 2 Amp CHARGING on USB ports
OTHER FEATURES
USB Battery Charging v1.2
APPLE CHARGING supported
Over Current Protection
up to 3 external disks can be connected at the same time
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug
LED INDICATION
the LED indicates the connection of the hub to the power supply
OS SUPPORTED
WINDOWS XP • Vista • 7 • 8 • 8.1 • 10 & later
Server 2008 • 2012 • 2016 & later
32 & 64bit versions supported
OS X 10.x & later • Linux 2.6.x & later
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>