Nedis LTLQ10W1WT Qi Charger with Soft Touch LED Light User Manual
- June 5, 2024
- nedis
Table of Contents
LTLQ10W1WT Qi Charger with Soft Touch LED Light
User Manual
Preface
Thank you for purchasing the Nedis LTLQ10W1WT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The LTLQ10W1WT is intended to charge devices (like a mobile phone).
A wireless charging function is needed for charging your device.
See the manual of your device to check whether your device has a wireless charging function or not.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Wireless charger LED lamp
---|---
Article number
|
LTLQ10W1WT
Dimensions (l x w x h)
|
214 x 100 x 100 mm (including LED light) or 10 mm (excluding LED light)
Light source
|
6 pcs LEDs
Touch control light
|
On / Off / Dimmer
Colour temperature range
|
3000 K
Power consumption
|
14 W
Max. light power output
|
1 W
Max. charging power output (when using the advised power supply)
|
10 W
Lamp luminance
|
≥ 130 LUX
Advised power supply
|
5 V DC / 2 A
9 V DC / 1.8 A
QC 3.0 or PD
USB cable length
|
1 m
Radio frequency range
|
110 – 205 KHz
Radio frequency power
|
19.81 dBµA/m @ 10 m
Main parts (image A)
A
1. Charging status indicator
2. Micro USB cable
3. Wireless charging area
4. Light / Brightness button
5. Micro USB port
6. LED light
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not place any metal products between the wireless charging area and the device while it is charging.
- Keep the product away from strong electromagnetic interference.
- Do not pull the LED light, it may be damaged.
- Do not use a damaged product.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not expose the product to water or moisture.
- Do not drop the product and avoid bumping.
- Place the product on a stable and flat surface.
- Do not open the product.
Installation
Connecting the product
1. Plug A 2 into A 5.
2. Plug the other end of A 2 into a USB adapter.
3. Connect the USB adapter to a power outlet.
Use
Using the LED light
1. Touch A 4 to switch on A 6.
2. Touch A 4 to switch off A 6.
3. Press and hold A 4 to change the brightness of A 6.
Charging your devices
- Make sure your device is compatible for wireless charging.
1. Place your device on A 3.
a. A 1 lights up green if the battery of the device is charging.
b. A 1 lights up green and red if the battery of the device is fully charged.
c. The battery level can also be checked on your device (see the manual of your device).
2. Remove the device from A 3 when A 1 turns green and red.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product LTLQ10W1WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/LTLQ10W1WT#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: [email protected]
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands