nedis NSWH8P110BK Gigabit Network Switch User Guide
- May 15, 2024
- nedis
Table of Contents
Gigabit Network Switch
For use with multiple network devices
NSWH8P110BK
NSWH5P110BK
NSWH8P110BK Gigabit Network Switch
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
|
---|---
ned.is/nswh8p110bk|
ned.is/nswh5p110bk
Specifications
| Product | Gigabit Network Switch |
|---|---|
| Article number | NSWH8P110BK |
| Input power | 100-240 VAC ; 1.0 A |
| Input AC frequency | 50 / 60 Hz |
| Output voltage | 5.0 VDC ; 1.0 A |
| Average active efficiency | 76.87% |
| Power consumption standby | 0.072 W |
| Maximum power consumption | 5.0 W |
|
---|---
Quick start guide
Gigabit Network Switch
For more information see the extended manual online: ned.is/nswh8p110bk | ned.is/nswh5p110bk
Intended use
This product is a wired network switch for stable internet on multiple devices
that allows you to connect multiple devices to your internet router with
Ethernet cables.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and
proper functioning.
This product can be used by children aged from 6 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the product in a safe way and understand the hazards involved. Children
shall not play with the product. Cleaning and user maintenance shall not be
done by children without supervision.
Ensure the adapter is not damaged when placing or installing the product.
Connect to a grounded socket only.
Main parts (image A)
- Network status indicator LEDs
- Power indicator LED
- Power adapter
- Ethernet ports
- Power supply port
Safety instructions
WARNING
• This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
• Disconnect the product from the power source and other equipment if problems
occur.
• Before use, always check that the mains voltage is the same as the voltage
on the rating plate of the product.
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep the packaging and this document
for future reference.
• Only use the product as described in this document.
• Do not open the product, there are no user serviceable parts inside.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• Only use the provided adapter.
• Do not use cleaning solvents or abrasives.
• Clean the outside of the product using a soft, damp cloth.
Installing the product (image B)
- Connect the power adapter A3 to the power supply port A5.
- Connect the other end of the power adapter A3 to a power outlet.
The Power indicator LED A2 lights up to indicate the power is on.
Connect the cables to the product as shown in image B.
Status indicator LED
The network status indicator LEDs A1 light up to indicate the network status
of each connected ethernet port A4:
| LED status | Description |
|---|---|
| On | Device connected to the |
network
Flashing| Sending/receiving data
Off| No device connected
References
- ned.is/
- Network Switch | Wired speed: Gigabit | Number of ethernet ports: 5
- Network Switch | Wired speed: Gigabit | Number of ethernet ports: 8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>