Nedis WIFILT10GDA60 Smart LED Bulb User Manual

Smart LED Bulb
to control with your phone

WIFILT10GDA60
WIFILT10GDST64
WIFILT10GDG125

For more information see the extended manual online: ned.is/wifilt10gda60
| ned.is/wifilt10gdst64 | ned.is/wifilt10gd125

WIFILT10GDA60 Smart LED Bulb

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch The Netherlands

| |
---|---|---
http://ned.is/WIFILT10GDA60| http://ned.is/WIFILT10GDST64| http://ned.is/WIFILT10GDG125
|
---|---

Intended use

The product is exclusively intended for lighting an indoor or outdoor environment.
The product is intended to be controlled exclusively via the Nedis Smart Life app.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

1. Bulb
2. Filament
3. Electric contact

Safety instructions

WARNING

• Only use the product as described in this manual.
• Do not use a damaged product.
• Do not expose the product to water or moisture.
• Do not drop the product and avoid bumping.

Installation of the Nedis Smart Life app

1. Download the Nedis Smart Life app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smart Life app on your phone.
3. Create an account with your mobile phone number or your e-mail address and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a Smart Life Home.
7. Set your location, choose the rooms you want to connect with and tap Done.

Installation of the Smart Life lamp

1. Screw the lamp into an E27 fitting.

2. Turn on the lamp.

3. In the Nedis SmartL ife app, tap + B3.

4. Under Search Device, select the lamp from the list of available devices.

5. Check if the lamp is blinking. If so, tap to confirm.
   **** If the lamp does not blink, turn the lamp off and on 3 times and check again.

6. Enter the password of the 2,4 GHz Wi-Fi network to which your phone is connected and tap Confirm. The Nedis Smart Life app will now search for the lamp.

7. Rename the lamp after it has been found and added.

**** If the regular connection method fails, the lamp can be connected using AP mode:

1. Tap + B3.
2. Under Add Manually, tap Smart Bulb.
3. Tap AP Mode in the top right corner.
4. Follow steps 5 till 7 of the regular connection method.

Using the Smart Life lamp (image B)
The Smart Life lamp can be controlled from any distance using the Nedis Smart Life app.
The home menu of the Nedis Smart Life app shows a control tile for each connected lamp and/or group.

1. Tap B4 to turn a lamp on or off.
2. Tap B2 to show the current settings of the lamp or group on the tile.
3. Tap the control tile B1 to access the controls of the lamp or group.
   **** See our support webpage to discover all possibilities of the Nedis® Smart Life lamp.

Specifications

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFILT10GDA60 | WIFILT10GDST64 | WIFILT10GDG125 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and safety datasheet if applicable) can be found and downloaded at http://webshop.nedis.com.

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands

References

• Nedis | Your wholesaler of consumer electronics
• Smart solutions for your daily needs | Nedis
• Smart solutions for your daily needs | Nedis
• Smart solutions for your daily needs | Nedis
• Nedis | Your wholesaler of consumer electronics
• Nedis | Your wholesaler of consumer electronics
• Nedis | Your wholesaler of consumer electronics
• Nedis | Your wholesaler of consumer electronics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>