nedis BTTC100BK Bluetooth Transmitter Receiver User Guide

nedis BTTC100BK Bluetooth Transmitter Receiver

Product Information

The BTTC100BK is a device that enables you to transmit or receive Bluetooth audio wirelessly. It comes with a built-in rechargeable battery and is designed for personal use. Any alterations to the product may impact safety, warranty, and performance.

Specifications

• Product: BTTC100BK
• Frequency Range: 2402 – 2480 MHz
• Bluetooth Range: Up to 10 meters
• Supported Profiles: A2DP / HFP / HSP
• Audio Codecs: SBC
• Connectivity: AUX output/input / USB-C

Main Parts
Main parts (refer to image A):

1. Mode switch
2. Bluetooth indicator LED
3. Charging indicator LED
4. Power button
5. AUX output/input
6. USB-C charging port

Safety Instructions
Charging the product:

1. Connect the USB charging cable (A9) to the USB-C charging port (A6).
2. Plug the other end of the USB cable into a 5V/1A USB adapter.
3. Insert the USB adapter into a power outlet. The charging indicator LED (A3) will illuminate during charging and turn off when fully charged.

Switching the product on/off:

1. Press and hold the power button (A4) for 3 seconds to turn the product on or off.
2. The product automatically powers off if not paired within 5 minutes.

Product Usage Instructions

Receiver Mode (Image B)

1. Set the mode switch (A1) to RX.
2. Connect the 3.5mm to 3.5mm audio cable (A8) between the AUX output/input (A5) and your audio device.
3. You can also connect headphones directly to the AUX output/input (A5).
4. To pair, switch on the product. The Bluetooth indicator LED (A2) will flash quickly.
5. Enable Bluetooth on your device and select BTTC100BK from the available devices list.
6. Upon successful pairing, the Bluetooth indicator LED (A2) will flash slowly. Press the power button (A4) to play or pause music.

Transmitter Mode (Image C)

1. Set the mode switch (A1) to TX.
2. Connect the 3.5mm to 3.5mm audio cable (A8) between the AUX output/input (A5) and your audio source.
3. To pair, switch on the product. The Bluetooth indicator LED (A2) will flash quickly.
4. Ensure your Bluetooth audio device is within range and powered on.
5. The AUX output/input LED (A5) will flash slowly upon successful pairing.

Declaration of Conformity
The complete Declaration of Conformity and safety datasheet can be accessed at webshop.nedis.com/BTTC100BK#support.

FAQ

• Where can I find the extended manual for BTTC100BK?
  You can find the extended manual online at ned.is/bttc100bk.

• What is the intended use of BTTC100BK?
  The BTTC100BK is designed for transmitting or receiving Bluetooth audio wirelessly with a built-in rechargeable battery for personal use.

Specifications

• Product Bluetooth® Transmitter Receiver
• Article number BTTC100BK
• Power supply 5 VDC / 1 A
• Battery Lithium-Polymer
• Max. battery lifetime Up to 6 hours
• Max. battery charging time Up to 2 hours
• Maximum Standby Time Up to 220 hours
• Bluetooth® version Bluetooth® 5.1
• Maximum transmission power 2 dBm
• Bluetooth frequency range 2402 – 2480 MHz
• Wireless Transmission effective distance Up to 10 meters
• Bluetooth profiles A2DP / HFP / HSP
• Supported codecs SBC
• Connections AUX output/input / USB-C

For more information see the extended manual online: ned.is/bttc100bk

Intended use

The BTTC100BK is a device that allows you to transmit or receive Bluetooth audio. The BTTC100BK functions wirelessly with a built-in, rechargeable battery. The product is not intended for professional use. Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts

1. Mode switch
2. Bluetooth indicator LED
3. Charging indicator LED
4. Power button
5. AUX output/input
6. USB-C charging port
7. 3.5 mm female to 2x RCA cable
8. 3.5 mm to 3.5 mm audio cable
9. USB charging cable

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Disconnect the product from the power source and other equipment if problems occur.
• Do not expose the product to water or moisture.
• Do not dismantle, open or shred secondary cells or batteries.
• Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
• Retain the original product literature for future reference.
• Do not leave a battery on prolonged charge when not in use.
• After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
• Batteries contain explosive gases. Prevent contact with flames and sparks. Provide adequate ventilation during charging.
• Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
• Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
• Read the manual carefully before use. Keep the manual for future reference.

Charging the product

1. Connect A9 to A6.
2. Plug the other end of A9 into a 5V/1A USB adapter (not provided).
3. Plug the USB adapter into a power outlet.
   • A3 lights up to indicate that the product is charging.
   • A3 switches off when the battery is fully charged.

Switching the product on/off

1. Press and hold A4 for 3 seconds to switch the product on or off.
   The product automatically switches off when it is not paired within 5 minutes.

MODE

Receiver mode

1. Set the mode switch A1 to RX.
2. Plug the 3.5 mm to 3.5 mm audio cable A8 into the aux output/input A5.
3. Plug the other end of A8 into the audio device.
   • It is also possible to connect headphones directly to A5.
   • You can also connect an audio device with the 3.5 mm female to 2 x RCA cable A7.
4. Switch on the product.
   • A2 flashes quickly.
5. Enable Bluetooth on the device you want to pair.
6. Select “BTTC100BK” from the list of available Bluetooth devices on your device.
   • A2 flashes slowly to indicate pairing is successful.
7. Press A4 to play or pause music.

Transmitter mode

1. Set A1 to TX.
2. Plug A8 into A5.
3. Plug the other end of A8 into your audio source.
   • You can also connect an audio device with the 3.5 mm female to 2 x RCA cable A7.
4. Switch on the product.
   • A2 flashes quickly.
5. Keep your Bluetooth audio device within range and switched on.
6. Pairing time will vary depending on the device used.
   • A5 flashes slowly to indicate pairing is successful.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product BTTC100BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: webshop.nedis.com/BTTC100BK#support

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands

ned.is/bttc100bk

References

• Bluetooth® Transmitter Receiver | Connection input: 1x AUX | Connection output: 1x AUX | SBC | Up to 1 Device | Maximum battery play time: 6 hrs | Black
• Bluetooth® Transmitter Receiver | Connection input: 1x AUX | Connection output: 1x AUX | SBC | Up to 1 Device | Maximum battery play time: 6 hrs | Black
• Bluetooth® Transceiver | Anschlüsse – Eingang: 1x AUX | Anschlüsse – Ausgang: 1x AUX | SBC | Bis zu 1 Geräte | max. Batteriespielzeit: 6 Std | Schwarz
• Transmisor Receptor Bluetooth® | Entradas: 1x AUX | Interruptores: 1x AUX | Salida de conexiones: 1x AUX | SBC | Hasta 1 dispositivo | Máximo tiempo de batería: 6 horas | Negro
• Bluetooth ® lähetin/vastaanotin | Tuloliitäntä: 1x AUX | Lähtöliitäntä: 1x AUX | SBC | Enintään 1 laite | Suurin akun toistoaika: 6 tuntia | Musta
• Émetteur-Récepteur Bluetooth® | Entrée de connexions: 1x AUX | Sortie de connexions: 1x AUX | SBC | Jusqu'à 1 appareil | Durée de lecture maximale de batterie: 6 heures | Noir
• Trasmettitore Bluetooth® | Ingresso collegamento: 1x AUX | Uscita collegamento: 1x AUX | SBC | Fino a 1 dispositivo | Tempo massimo di riproduzione della batteria: 6 ore | Nero
• Bluetooth® Zender / Ontvanger | Input: 1x AUX | Output: 1x AUX | SBC | Maximaal 1 Apparaat | Maximale batterijduur: 6 uur | Zwart
• Offer to sell domain: nedis.pl
• Transmisor Receptor Bluetooth® | Entradas: 1x AUX | Interruptores: 1x AUX | Salida de conexiones: 1x AUX | SBC | Hasta 1 dispositivo | Máximo tiempo de batería: 6 horas | Negro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>