nedis HHGS300 Handheld Garment Steamer User Guide
- May 15, 2024
- nedis
Table of Contents
nedis HHGS300 Handheld Garment Steamer
Specifications
- Product: Handheld Garment Steamer – HGGS300
- Model: HHGS300
- For almost every type of textile
- Online manual: ned.is/hhgs300
Product Usage Instructions
Intended Use:
The Handheld Garment Steamer is designed for almost every type of textile.
Main Parts:
- Steam outlet
- Steam button
- Handle
- Standby LED indicator
- Steam selector button
- Low steam LED indicator
- High steam LED indicator
Safety Instructions:
Do not touch hot surfaces. Disconnect the power and let the product cool
down completely before filling the water reservoir or removing brushes.
Before First Use:
- Remove all packaging material, protective stickers, and covers.
FAQ
-
Q: What should I do if the product does not switch on?
A: Make sure the product is plugged in properly. If the standby LED indicator blinks and the buzzer sounds, it may indicate a short circuit. -
Q: What if the product does not produce steam?
A: Check if the water reservoir is filled correctly and not empty. Ensure the water reservoir cover is placed correctly. If the product is overheated, allow it to cool down before retrying.
For more information see the extended manual online: ned.is/hhgs300
Intended use
- This product is intended to remove creases and wrinkles in various types of fabric.
- The product is intended for indoor use only.
- Any modification of the product may have consequences for safety, warranty and proper functioning.
- This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
- The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.
Main parts
(image A)
- Steam outlet
- Steam button
- Handle
- Standby LED indicator
- Steam selector button
- Low steam LED indicator
- High steam LED indicator
- Net brush
- Hair brush
- Water reservoir cover
- Measuring cup
- Water reservoir
- Power cable
Safety instructions
Indication for a hot surface. Contact may cause burns. Do not touch.
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Do not immerse the product in water or other liquids.
- Never use the product in wet or damp locations, such as bathrooms.
- Always check that the voltage of the product corresponds to the mains voltage.
- Only fill the water reservoir with clean tap water or distilled water.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- The power cable cannot be replaced. If the cable is damaged the product should be scrapped.
- Do not use the product with an empty water reservoir.
- Keep the product out of reach for children under 8 years of age when the product is switched on or cooling down.
- Children should be supervised to ensure that they do not play with the product.
- Do not open the water reservoir during use.
- Do not direct steam towards people or other living objects. The ejected steam is hot.
- Keep the power cable away from the ejected steam and hot parts of the product.
- Do not pull the power cable to move the product.
- Only use the product as described in this document.
- Do not drop the product and avoid bumping.
- Do not leave the product unattended when switched on.
- Do not disconnect the product by pulling the cable. Always grasp the connector and pull.
- Do not touch the steam outlet when using the product. The steam outlet is hot.
- Do not use the product on metal surfaces. The hot steam may cause discolouring.
- Do not allow children to clean the product without supervision.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not open the product, there are no user serviceable parts inside.
- Before cleaning and maintenance, switch off the product and disconnect the power. Let the product cool down completely before filling the water reservoir or removing the brushes.
Before first use
Remove all packaging material, protective stickers and covers from the product.
Filling the water reservoir (image B)
- Rotate the water reservoir A counter clockwise and remove from the handle A.
- Fill the measuring cup A with water.
- Remove the water reservoir cover A.
- Fill the water reservoir A with water.
- Place back the water reservoir cover A.
- Place the water reservoir A on the handle A.
- Rotate the water reservoir A clockwise to fasten the water reservoir A to the handle A.
Attaching the brushes (image C)
Connecting the product
- Place the product upright on a flat and stable surface.
- Plug the power cable A into a power outlet.
The standby LED indicator A lights up to indicate the product is in standby.
Switching on the product
Press the steam selector button A to cycle between the available steam
settings.
Choose between standby, low and high steam.
Wait until the low steam LED indicator A or high steam LED indicator A lights
up to indicate the product is heated up.
Using the product
-
Hang the wrinkled fabric in a vertical position.
Make sure the fabric hangs free so the steam does not gather on the fabric. -
Press and hold the steam button A to eject steam.
-
Slide the steam button A to the lock position to spray steam continuously.
-
Move the product up and down to remove creases and wrinkles.
After use
-
Press the steam selector button A to switch the product to stand by.
The standby LED indicator A lights up to indicate the product is in standby. -
Allow the product to cool down.
-
Remove the brush A.
-
Remove the water reservoir cover A.
-
Empty the water reservoir A.
-
Place back the water reservoir cover A.
-
Place the product on the water reservoir A.
Troubleshooting
Maintenance
- Disconnect the product before cleaning.
- Before cleaning and maintenance, switch off the product and disconnect the power. Let the product cool down completely before filling the water reservoir or removing the brushes.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Do not clean the inside of the product.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Clean the brush A with a soft, damp cloth.
Disposal
The product is designated for separate collection at an appropriate collection
point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible
for the waste management.
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch The Netherlands