nedis ACON2508BK Digital Audio Converter User Guide
- May 15, 2024
- nedis
Table of Contents
Digital Audio Converter
2x RCA → Toslink + RCA
ACON2508BK
Quick start guide
ACON2508BK Digital Audio Converter
For more information see the extended manual online: ned.is/acon2508bk
Intended use
This product is intended to convert a stereo RCA signal into a Toslink signal
and/or an RCA signal.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and
proper functioning.
Specifications
| Product | Digital Audio Converter |
|---|---|
| Article number | ACON2508BK |
| Power input | 5.0 VDC ; 0.6 A |
| Conversion | 2x RCA stereo audio to RCA + Toslink |
| Supported formats | PCM |
| Supported bitrates | 96 kHz 24-bit |
Main parts
(image A)
1 Power indicator LED
2 Stereo RCA female input
3 Power port
4 Power switch| 5 RCA female output
6 Toslink female output
7 DC to USB power cable
---|---
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Only use the provided power cable.
Installation
- Make sure all the devices you want to connect have been switched off.
- Plug a twin RCA cable (not included) into the stereo RCA female input A 2.
- Plug the other end of the cable into your audio source device.
- Plug an RCA cable (not included) into the RCA female output A 5 or plug a Toslink cable (not included) into the Toslink female output A 6.
- Plug the other end of the cable into your audio output device.
- Plug the DC to USB power cable A 7 into the power port A 3.
- Plug the other end of A 7 into a USB power source or adapter.
Use
-
Switch on the product.
The power indicator LED A 1 burns blue. -
Switch on the connected audio devices.
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
07/20