nedis X5 Altoparlante Bluetooth User Guide

: May 15, 2024
: nedis

Table of Contents

nedis X5 Altoparlante Bluetooth
Product Information
Bluetooth® Speaker
Intended use
Safety instructions
Charging the product
Using the product
Pairing two products for True Wireless Stereo (TWS)
Troubleshooting
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis X5 Altoparlante Bluetooth

Product Information

Specifications:

Model: SPBT2460BK
Design: Portable with Dynamic RGB Lighting
Online Manual: ned.is/spbt2460bk

Intended Use:
The SPBT2460BK is designed for portable audio playback with dynamic RGB lighting. It features various control buttons for volume adjustment, track selection, play/pause, mode switching, and power management.

Main Parts :

Volume down/previous track button
Volume up/next track button
Play/pause button
Mode button
Power button

Safety Instructions:
WARNING: Keep away from high humidity environments to prevent damage.

Charging the Product:
The product comes with a partially charged battery. To charge:

Plug in a USB cable into the USB port (A8).
Connect the other end to a power source or audio device.

Using the Product:
USB Mode:

Connect a USB cable to the USB port.
Insert the other end into your audio source or use a USB stick.

AUX Mode:

Insert a 3.5mm audio cable into the AUX port.
Connect the other end to your audio source.
Press and hold the play/pause button to control RGB lights.

Pairing for True Wireless Stereo (TWS):

Ensure both products are on.
Press and hold the mode button on one product to pair with the other.
Listen for pairing tones and success confirmation.
To disconnect, press and hold the mode button or switch off the products.

Troubleshooting :

Problem: The product does not switch on.
Possible Causes: Low battery power or internal malfunction.
Solution: Charge the product or reset using the AUX port.

Disposal :
The product should be disposed of at an appropriate collection point. Do not dispose of it with household waste. Contact local authorities for more information.

Declaration of Conformity:
The Declaration of Conformity and safety datasheet can be downloaded from nedis.com/SPBT2460BK#support

Frequently Asked Questions (FAQ):

Q: How do I reset the product?
A: Press the reset button in the AUX port A9 with a small pin to reset the product.
Q: How often should I clean the product?
A: Clean the product every month using a soft, clean, dry cloth.

Bluetooth® Speaker
Portable design with Dynamic RGB Lightning
SPBT2460BK

$nedis-X5-Altoparlante-Bluetooth- $2$$

Quick start guide

Bluetooth® Speaker

For more information see the extended manual online : ned.is/spbt2460bk

Intended use

This product is intended as a speaker for playing music from your device via Bluetooth®, USB, or AUX.
This product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.
This product is intended to be used in household and similar applications such as kitchen areas.
This product is not intended for professional use.

Main parts (image A)

Volume down/previous track button
Volume up/next track button
Play/pause button
Mode button
Power button
Hook
USB-C charging port 8 USB port
AUX port
USB – USB-C charging cable
RGB lights

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
Only use the provided USB charging cable.
Only charge the product via a 5V/1–2A power adapter or a PC.
Do not drop the product and avoid bumping.
Do not open the product, there are no user serviceable parts inside.
Disconnect the product from the power source before cleaning.
Do not immerse the product in water or other liquids.
Do not expose the product to water, rain, moisture, or high humidity.
Do not use aggressive chemical cleaning agents when cleaning the product.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.

Charging the product

The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before using the product for the first time.

Plug the USB-C connector of the USB – USB-C charging cable Aq into the USB-C charging port A7.
Plug the other end of the USB – USB-C charging cable Aq into a 5V/1–2A power adapter.
Plug the power adapter into a power outlet.

Using the product

Press and hold the power button A5 to switch on the product.
Press the mode button A4 to switch between Bluetooth®, USB, and AUX mode.

Bluetooth® mode| Activate Bluetooth® on your audio source and connect with the product (SPBT2460BK).
---|---
USB mode|

Plug a USB cable (not included) into the USB port A 8.
Plug the other end of the USB cable into your audio source. You can also use a USB stick.

AUX mode|

Plug a 3.5 mm audio cable (not included) into the AUX port A 9.
Plug the other end of the 3.5 mm audio cable into your audio source.

Press and hold the play/pause button A3 to activate, change, or deactivate the RGB lights Aw.

Pairing two products for True Wireless Stereo (TWS)

Press the volume down/previous track button A1 and the volume up/next track button A2 simultaneously to disconnect your audio source.
You can pair two SPBT2460BK products via Bluetooth® to create TWS.
This function is only available in Bluetooth® mode.

Make sure both products are switched on.
Press and hold the mode button A4 on one of the products to pair both products with each other. The products emit a tone to indicate pairing. The products emit another tone to indicate pairing is successful.
Press and hold the mode button A4 on one of the products or switch off the products to disconnect the two products.

Answer phone calls

This function is only available in Bluetooth® mode.

press the play/pause button A 3 to answer or finish a phone call.
Press and hold the play/pause button A 3 to reject a call/switch to phone during call.

Troubleshooting

Problem	Possible cause	Possible solution
The product does	The battery power	Charge the
not switch on.	is low.	product
An internal	Press the reset
malfunction has	button in the AUX
occurred.	port A 9 with a
	small pin to reset
	the product.

Clean the product every month.

Switch off the product.
Disconnect the product from the power outlet.
Clean the product with a soft, clean, dry cloth.

Disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product SPBT2460BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/SPBT2460BK#support