nedis LLFL10BLK LED Floodlight User Guide

: May 15, 2024
: nedis

Table of Contents

LLFL10BLK LED Floodlight
Intended use
Main parts (image A)
Safety instructions
Installing the product (image B – F)
PIR sensor control (LLFLP15BLK only)
Documents / Resources

LED Floodlight
20 Watt (with PIR sensor)
LLFL10BLK/LLFLP15BLK Quick start guide

LLFL10BLK LED Floodlight

nedis LLFL10BLK LED Floodlight - FIGURE 1 nedis
LLFL10BLK LED Floodlight - FIGURE 2

LED Floodlight

For more information see the extended manual online: ned.is/llfl10blk | ned.is/llflp15blk

Intended use

This product is an LED floodlight intended to illuminate dark areas.
The product LLFLP15BLK includes an adjustable PIR sensor for automatic motion activation in dark environments.
This product is intended for indoor and outdoor use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
This product is intended to be used in household and similar applications such as kitchen areas.
The product is not intended for professional use.

Main parts (image A)

1. LEDs
2. Mounting bracket bolts
3. PIR sensor
4. Sensitivity dial| 5. Brightness dial
6. Timer dial
7. Mounting bracket
8. Power plug
---|---

LLFLP15BLK only.

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power source and other equipment if problems occur.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Children should be supervised to ensure that they do not play with the product.
Only power the product with the voltage corresponding to the markings on the product.
Do not look directly into the light, this may cause eye damage.
Disconnect the product before cleaning.
Do not clean the inside of the product.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Installing the product (image B – F)

Make sure the power cable is disconnected from the power outlet.
Check what plugs and screws are best suited for the intended surface.

PIR sensor control (LLFLP15BLK only)

Use the dials A 4, 5, 6 to variably control the PIR sensor A 3 settings.

Dial	Direction	Description
Sensitivity dial A4	Clockwise	Increase the sensitivity of the motion

sensor.
Counterclockwise| Decrease the sensitivity of the motion sensor.
Brightness dial A5| Clockwise| Increase the maximum environmental brightness from which the motion sensor is activated.
Counterclockwise| Decrease the maximum environmental brightness from which the motion sensor is activated.
Timer dial A6| Clockwise| Increase the product activation time after detection.
Counterclockwise| Decrease the product activation time after detection.

Switch off the PIR sensor A3:

Unplug the power plug A8 from the power outlet.
Wait 2 seconds.
Reinsert the power plug A8 into the power outlet.

Switch on the PIR sensor A3:

Unplug the power plug A8 from the power outlet.
Wait 10 seconds.
Reinsert the power plug A8 into the power outlet.

Disposal
**** The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

nedis LLFL10BLK LED Floodlight - QR Code 1 ned.is/llfl10blk| nedis LLFL10BLK LED
Floodlight - QR Code 2 ned.is/llflp15blk
---|---