artika PDT-SWR Swirl Pendant LED Light Fixture Instruction Manual
- June 5, 2024
- artika
Table of Contents
Model: PDT-SWR
Pendant LED Light Fixture – SwirlTM
INSTRUCTION MANUAL
IMPORTANT, KEEP FOR FUTURE REFERENCE: PLEASE READ CAREFULLY.
Made in China
Residential use only
Indoor use only
INCLUDED
Item | Description | Quantity |
---|---|---|
Junction box screw | × 2 | |
Wire connector | × 3 | |
Mounting Bracket | × 1 | |
Canopy screw | × 2 | |
Pendant LED light fixture with canopy assembled | × 1 |
WHAT YOU WILL NEED…
Screwdriver
CAUTION
If using a dimmer, it must be LED compatible
IMPORTANT
The installer and/or user must read, understand and follow these instructions
before installing the product. This product must be properly installed before
it is used.If instructions are not followed, the manufacturer will not be held
responsible for any problems or product malfunction. Failure to follow
installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In
some states or provinces, it is a legal requirement for this type of product
to be installed by a certified electrician, according to the electrical and
building codes effective in the region where the unit is used. This product is
compatible with most LED dimmers
WARNING:
Risk of electrical shock.
Turn off the breaker at the panel. Switch off the main electrical supply from
the fuse box/circuit breaker before installing the unit or doing any
maintenance. Do not use outdoor.
HEIGHT ADJUSTMENT
NOTE: It is recommended to make any major adjustments to the height of the light fixture before installation.
- With the power off, measure the distance from the ceiling to the bottom of where you would like your light fixture to hang.
- To retract the wire, gently push it into the light fixture base (fig. 1).
- To extend the wire, push the metal collar while gently pulling the wire down (fig. 2). When the metal collar is released, the wire will be fixed into position.
- Once the wire is at the desired length, turn the fixture over and slide the plastic wire retainer up to the wire nut, to prevent the pendant from slipping down when in use.
fig.1|
---|---
fig. 2
Plastic wire retainer|
WARNING:
Risk of electrical shock. Turn off the breaker at the panel.
STEP-BY-STEP INSTALLATION
-
Turn off power at the circuit breaker and the light switch. Ensure the power is off before continuing.
-
Install the mounting bracket on the junction box using the junction box screws (fig. 3).
-
Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector. Connect the black wire (L) from the light
fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fixture to the ground supply wire (G) from the junction box using a wire connector (fig. 4). -
Put the wires into the canopy.
-
Mount the canopy onto the mounting bracket and secure it with the canopy screw.
REPLACEMENT PARTS
Item | Description | Artika # |
---|---|---|
Hardware kit | PDT-SWR/K |
TO ORDER REPLACEMENT PARTS, PLEASE CONTACT CUSTOMER SERVICE.
(Service available only in the USA and Canada).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
Class B digital devices, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception.
However, there is no guarantee that interference will not ccur in a
particular installation. If this equipment causes harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Artika For Living Inc. is proud to offer you a three (3) years limited
warranty on manufacturing defects from the date of purchase for residential
use only. The warranty is extended to the original owner in USA and Canada and
is non-transferable. It does not apply to retailers, commercial applications
or establishments. The original sales receipt is
required for all warranty claims. The remedy under this limited warranty shall
be a product or part replacement at Artika’s discretion as provided herein and
cannot exceed the
original purchase price.
This warranty is valid only on products installed in accordance with the
building code and laws effective in the region where the unit is used as well
as in accordance with the provided instruction manual. It does not cover
products installed incorrectly or subjected to abnormal use. Product(s) or
component part(s) may be required to be returned for inspection and
verification.
Normal wear and tear, misuse, negligence, vandalism, improper maintenance
(surface damage due to chemical interaction or cleaning agents including, but
not limited to, scouring pads, use of cleaners containing abrasives, alcohol
or other organic solvents) improper handling, accident, abuse, fire, flood,
theft, acts of God, neglect, or alteration of the product will not be covered
under this limited warranty. It excludes any accessories that accompany the
product including but not limited to bulbs or batteries.
The warranty does not cover handling, labor, transportation, or any other cost
associated with the installation or replacement of the product. This limited
warranty is valid in the country of purchase and by Artika authorized
retailers only.
Artika for Living Inc. will not be held responsible for any direct or
consequential damages or injuries related to the use of this product arising
from improper use or installation of this product. Please visit
www.artika.com to discover more about Artika for
Living Inc.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is onnected.
—Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Artika For Living Inc.
1756 50th ave, Lachine,
QC H8T 2V5, Canada
Customer Service
Monday to Friday
9 a.m. – 5 p.m. EST
1-866-661-9606
support@artika.com
www.artika.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>