Holybro Kopis 30088 Cinematic X8 Frame Kit Installation Guide
- June 6, 2024
- Holybro
Table of Contents
#30088
Frame Kit
User Manual & Installation Guide v1.0
Holybro kopis cinematic X8 is a powerful and heavy-duty model designed for professionals. With a full carbon fiber frame that provides a good shock absorption performance, Kopis Cinematic X8 offers a perfect platform with an adjustable installation angle available from 0 to 25 °. for both SLR and HD cameras such as Comodo; scam-e2; Sony a7s3 and Panasonic S5, etc. With redundant configurations of ESC and motor supported, best performance and security are both ensured. DJI FPV air unit digital VTx system installation seat has been reserved. Two pieces of 5mm carbon fiber arms provide reliable structural support for this powerful quad. We also have new version Holybro KAKUTE F7 V1.5, KAKUTE F7 HDV,KAKUTE F7 Mini V3 which are compatible with X8.
Features:
- Wheelbase: 396mm
- Arm: 16mm wide x 10mm thick ( with 5mm thick carbon fiber boards overlaid)
- Landing gear: TPU bracket combined with 10 mm carbon fiber tube
- Compatible with DJI AIR UNIT&CADDX Vista HD digital VTx
- Compatible with multiple mounting holes specs : 30.5×30.5mm & 20x20mm
- Professional camera installation supported: Comodo, zcam-e2, Sony a7s3, Panasonic S5
- Camera platform shock absorption structure with 10 silicone damping balls
- Spacing between top and bottom plates: 22mm
- Camera platform elevation: 0 ~ 25 ° Adjustable
- Propeller size: 7 “
- Frame weight: 640g
Recommended equipments：
FC: KAKUTE F7 V1.5 / KAKUTE F7 HDV / KAKUTE F7 Mini V3
ESC : Tekko32 F3 4in1 45A ESC / Tekko32 F4 4in1 45A ESC / Tekko32 F3 Metal
4in1 65A ESC
VTx : DJI FPV Air Unit / CADDX Vista Kit
Motor: 2806 KV1300~1500
Propeller:7040
Battery: LiPo cells 3~6S
Includes：
1x Kopis Cinematic x8 Kit
KAKUTE FC Modification Instruction for Octo x8 Multirotor Frame
To enable Kakute F7 flight controller to have 8x PWM Motor Output for Octo x8
Multirotor Frame, please follow the instruction below:
Step 1.
Remove the capacitor in the red circle marked in the pictures below according
to your Kakute F7 model.
Please note that you have the options to connect M7 to R4 or LED pads.
Connecting to R4 pad will allow Bidirectional DSHOT and RPM Filter support,
but you will lose UART4 RX.
Step2 option A – Follow this step only if M7 is soldered onto LED & M8 is
soldered onto NC
Go to Betaflight CLI and type in the following:
resource LED_STRIP 1 NONE
resource MOTOR 7 D12
resource MOTOR 8 B03
timer B03 AF1
dma pin B03 0
save
Step2 option B – Follow this step only if M7 is soldered onto R4 & M8 solder onto NC
Bidirectional DSHOT and RPM Filter supported. Note that this will disable
UART4 RX.
Go to Betaflight CLI and type in the following:
resource CAMERA_CONTROL 1 NONE
resource SERIAL_RX 4 NONE
resource MOTOR 7 A01
resource MOTOR 8 B03
timer A01 AF2
timer B03 AF1
dma pin A01 0
dma pin B03 0
save
Step 3.
Go to the Betaflight Configuration tab and select “Octo X8” under “Mixer”.
Step 1
Go to Betaflight CLI and type in the following:
resource LED_STRIP 1 NONE
resource CAMERA_CONTROL 1 NONE
resource MOTOR 7 A08
resource MOTOR 8 B03
save
Step 2.
Go to the Betaflight Configuration tab and select “Octo X8” under “Mixer”.
Wiring diagram
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>