nedis LLFL10BLK LED Floodlight 20 Watt with PIR Sensor Instruction Manual
- May 15, 2024
- nedis
Table of Contents
nedis LLFL10BLK LED Floodlight 20 Watt with PIR Sensor Instruction Manual
LED Floodlight
For more information see the extended manual online: ned.is/llfl10blk | ned.is/llflp15blk
Intended use
This product is an LED floodlight intended to illuminate dark areas. The product LLFLP15BLK includes an adjustable PIR sensor for automatic motion activation in dark environments. This product is intended for indoor and outdoor use. Any modification of the product may have consequences for safety, warranty and proper functioning. This product is intended to be used in household and similar applications such as kitchen areas. The product is not intended for professional use.
Main parts (image A)
- LEDs
- Mounting bracket bolts
- PIR sensor*
- Sensitivity dial*
- LLFLP15BLK only. 5. Brightness dial 6. Timer dial 7. Mounting bracket 8. Power plug
Safety instructions
⚠ – WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Disconnect the product from the power source and other equipment if problems occur.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Children should be supervised to ensure that they do not play with the product.
- Only power the product with the voltage corresponding to the markings on the product.
- Do not look directly into the light, this may cause eye damage.
- Disconnect the product before cleaning.
- Do not clean the inside of the product.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Installing the product (image B F)
Make sure the power cable is disconnected from the power outlet.
Check what plugs and screws are best suited for the intended surface.
PIR sensor control (LLFLP15BLK only)
Use the dials A456 to variably control the PIR sensor A3 settings.
Switch off the PIR sensor A3:
- Unplug the power plug A8 from the power outlet.
- Wait 2 seconds.
- Reinsert the power plug A8 into the power outlet.
Switch on the PIR sensor A3:
- Unplug the power plug A8 from the power outlet.
- Wait 10 seconds.
- Reinsert the power plug A8 into the power outlet.
Disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for the waste management.http://ned.is/LLFL10BLKhttp://ned.is/LLFLP15BLK
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands
service@nedis.com
References
- LED Floodlight | 4000 K | Rated luminous flux: 1620 lm | 20 kWh | IP65 | 1.00 m | Energy class: F | 220 - 240 V AC 50/60 Hz
- LED Floodlight | 4000 K | Rated luminous flux: 1620 lm | 20 kWh | IP44 | 1.00 m | Energy class: F | 220 - 240 V AC 50/60 Hz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>