HAMRON 021329 Rear View Mirror for Caravans Instruction Manual
- June 5, 2024
- HAMRON
Table of Contents
HAMRON 021329 Rear View Mirror for Caravans
DESCRIPTION
One flat and one convex wing mirror for a car with a caravan. Suitable for all
cars and attached tool-free with clip-ons. Fitted with safety line to prevent
it getting lost and adjustable 90° both horizontally and vertically. The
mirrors are
CE marked. Storage bag included.
PARTS AND ACCESSORIES
- Flat and convex mirror
- Clamping screw
- Wing screw
- Safety line FIG. 1
- Clips, 4
- Extra covers, 4
- Storage bags, 4 FIG. 2
TECHNICAL DATA
- Size W11.5 x H17 cm
ASSEMBLY
The flat mirror is attached on the driver’s side and the convex mirror on the passenger’s side. The convex mirror is attached in the same way as the flat mirror.
-
Press the caps (6) over the open side of the holes for the clamping screws (2).
FIG. 3 -
Place the safety line (4) over the left wing mirror.
FIG. 4 -
Position the fasteners at a suitable place on the top edge of the left mirror.
FIG. 5
-
Tighten the screws (2) clockwise to fix the fasteners firmly in place.
FIG. 6 -
Put the loose end of the strap through the clip (5).
-
Place the strap round the back of the mirror.
FIG. 7 -
Hook the clips (5) on the bottom edge of the left mirror.
FIG. 8
-
Adjust the strap so that it is tight.
-
Tuck any leftover length of strap under the tensioned strap on the back of the mirror.
FIG. 9 -
Adjust the position of the mirror by moving the arm in or out.
-
Lock the arm in place by tightening the wing screws (3) when the mirror is in the required position.
FIG. 10
A ball bearing joint on the back allows the mirror to be adjusted to the required angle.
FIG. 11
Documents / Resources
|
HAMRON 021329 Rear View Mirror for
Caravans
[pdf] Instruction Manual
021329, Rear View Mirror for Caravans, Rear View Mirror, View Mirror, 021329,
Mirror
---|---