hamron ATV Tire Chains Instruction Manual

ATV Tire Chains
Instruction Manual

ATV Tire Chains

020721/020722/020723

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this document in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
WWW.JULA.COM
© JULA AB • 2022-03-18
JULA AB
BOX 363, 532 24 SKARA, SWEDEN

SAFETY INSTRUCTIONS

The product must only be used for driving in terrain.

SYMBOLS

Read the instructions.

TECHNICAL DATA

020721
Suits the following tire dimensions in inches:
22 x 11 x 8
22 x 12 x 8
22 x 11 x 10
22 x 10 x 10
23 x 10 x 10| 020722
Suits the following tire dimensions in inches:
24 x 9 x 117
25 x 10 x 12
24 x 11 x 10
24 x 11 x 9
25 x 8 x 12| 020723
Suits the following tire dimensions in inches:
25 x 13 x 9
25 x 13.5 x 9
25 x 12 x 9
25 x 12 x 10
24 x 12 x 10
24 x 13 x 9
24 x 13 x 12
---|---|---

DESCRIPTION

Snow chain for ATV, transverse with studs.
Intended for four-wheelers with smaller treads on the tires.
A. Transverse chain hook
B. Quick-release link
C. Clamp hook
FIG. 1

ATTACHMENT

1. Lay out the snow chain flat beside the ATV wheel, with the sharp/protruding ends of the links and transverse chain hooks turned up as in figure 1A. Straighten out the snow chain so that all the parts are extended, flat, and not entangled.

2. Put the chain on the tire without turning it. The protruding and sharp parts and the ends of the transverse chain hooks should be turned outwards from the tire. Pull the chain so that it touches the surface immediately in front of the tire. Work the front transverse chain under the tire, to prepare to roll over the chain.
   FIG. 2

3. Roll the ATV forward over the chain until the quick-release links and clamp hooks hang halfway up on the tire (level with the wheel axle) and both ends of the chain are easily accessible. Center the chain on the tire tread.
   FIG. 3

4. Fasten the quick-release links and clamp hooks.
   – First clamp to the inside of the wheel. Stretch the chain parts on the inside of the wheel and note the number of links that remain after stretching. Count the same number of links on the outside of the wheel and hook the end of the clamp hook through the link you have counted to
   FIG. 4
   – Hook the clamp hook under the side chain link. The snow chain should sit firmly and well-tensioned. Retention if necessary by repeating steps 5 and 6.
   FIG. 5

5. Drive, check, and retain by repeating steps 5 and 6 until the chain sits firmly on the tire.
   FIG. 6

6. Check that the quick-release links and clamp hooks are secure. Fasten excess chain length with heavy-duty cable ties.
   FIG. 7

Documents / Resources

| hamron ATV Tire Chains [pdf] Instruction Manual
ATV Tire Chains, Tire Chains, Chains
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>