Gude 515 Big Wheeler Instruction Manual
- June 3, 2024
- Gude
Table of Contents
Gude 515 Big Wheeler
DELIVERED ITEMS
Assembly
Starting-up the machine
Cutting instructions
Operation
Cleaning / Maintenance
Technical Data
- Petrol Lawnmower ………………………………………………………………………………………….BIG WHEELER 515 4 IN 1
- Art. No ……………………………………………………………………………………………………………………………………………………………………………95385
- Contents ………………………………………………………………………………………………………………………………………………………… 173 ccm
- Motor output
- OHV 4-stroke motor ………………………………………………………………………………………………………………………….. 3,8 kW (5,1 PS)
- Rated revolutions ………………………………………………………………………………………………………………………………………2850 min-1
- Travel speed …………………………………………………………………………………………………………………………………………….ca. 3,3 km/h
- Cutting width ………………………………………………………………………………………………………………………………………………….508 mm
- Collection bag capacity ………………………………………………………………………………………………………………………………………..70 l
- Fuel ………………………………………………………………………………. SUPER/SUPER PLUS/SUPER E10/NORMAL/NORMAL E10
- Weight ……………………………………………………………………………………………………………………………………………………………….42,9 kg
- Dimensions ……………………………………………………………………………………………………………………………………… 1650 x 560 x 1000 mm
- Noise and Vibration Information
- Sound pressure level LpA
-
- …………………………………………………………………………………………………………………………84,1 dB (A)
- Sound power level LWA
- 1)………………………………………………………………………………………………………………………………. 98 dB (A)
- Wear ear protectors!
- Vibration emission value ah
-
- …………………………………………………………………………………………………………………………………..5,8 m/s2
-
- Uncertainty K=3 dB (A), 2) Uncertainty K=1,5 m/s2
Warning The vibration emission level will vary because of the ways in which a
power tool can be used and may increase above the level given in this
information sheet. The vibration emission level may be used to compare one
tool with another. It may be used for a preliminary assessment of exposure. An
accurate estimate of the vibratory load should also take into account the
times when the tool is shut down or when it is running but not actually in
use. This may significantly reduce the vibratory load over the total working
period.
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
Read and understand the operating instructions before using the appliance.
Familiarise with the control elements and how to use the appliance
properly.Abide by all the safety measures stated in the service manual. Act
responsibly toward third parties. The operator is responsible for accidents or
risks to third parties. In case of any doubts about connection and operation
refer please to our customer center
delivered items
- Mulching wedge
- Side ejection
- Collection bag
- Spark plug wrench
- Bowden clamps
- Wheels
- Screws
- Panel
Specified Conditions Of Use
The mower has been designed for cutting grass and grass areas with a maximum
climb of 20° in private gardens around the house and in garden colonies.
Do not use this product in any other way as stated for normal use. Not
observing general regulations in force and instructions from this manual does
not make the manufacturer liable for damages.
Use the appliance only outside, never use it in confined and bad ventilated
areas.
The mower must not be used for cutting bushes, hedges and thickets, for
cutting and mulching creepers or lawns on roofs or in balcony boxes. The mower
must also not be used as a crusher for mulching tree cuttings and hedges or
levelling any terrain roughness.
Requirements for operating staff
The operating staff must carefully read the Opera-ting Instructions before
using the appliance..
This device is not intended for use by persons (including children) with
limited physical, sensory or mental capabilities or without the necessary lack
experience or knowledge unless they are supervised by a person who is
responsible for their safety or were instructed by that person in how to use
the device.
Qualification: Apart from the detailed instructions by a professional, no
special qualification is necessary for appliance using.
Minimum age: Persons over 16 years of age can only work on the appliance.
An exception includes youngsters trained in order to reach knowledge under
supervision of the trainer during occupational education.
Local regulations may stipulate the minimum age of the user.
Training: Using the appliance only requires corresponding training by a
professional or the Operating Instructions. No special training is necessary..
Emergency procedure
Danger of injury !
Never put your hands and feet near the rotating parts.
Danger of burns !
Some parts of the appliance get too hot when the appliance is operated. Do not
touch any hot parts, e.g. engine and muffler.
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. For the sake of eventual accident, in
accordance with DIN 13164, a workplace has to be fitted with a first-aid kit.
It is essential to replace any used material in the first-aid kit immediately
after it has been used. If you seek help, state the following pieces of
information:
- Accident site
- Accident type
- Number of injured persons
- Injury type(s)
Symbols
- Caution!
- Read the Operating Instructions
- Wear ear protectors!
- Wear eye protective goggles !
- Warning against bounced subjects
- Keep children and other persons inclu-ding animals in a safe distance when using the appliance.
- Use the appliance only outside, never use it in confined and bad ventilated areas.
- Wear safety cut through resistant shoes with safety sole and steel toe !
- Caution – hot surface!
- Warning against dangerous voltage
- Protect against humidity
Safety instructions
Read all safety warnings and all instructions, including those given in the
accompanying brochure. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference.
Keep children and other persons including animals in a safe distance when
using the appliance. Minimum safe distance is 5 m.
Wear personal protective equipment.
Wear solid shoes and long trousers.
Wear protective gloves if necessary.
Use the appliance in broad daylight or in a well-lit environment.
Check carefully the terrain where the appliance is being used and remove any
items that could get caught and be thrown away.
Fuel is highly flammable.
Keep the fuel in sui,le containers only.
The appliance may only be refuelled outdoors and not near open fire or burning
cigarettes.
Refuel before starting the appliance. If the engine is running or still hot,
it must not be refuelled or the tank cover opened.
Make sure the fuel does not overflow. If the
fuel overflows, the engine must not be started. Remove any dirt from the
appliance and prevent any attempt at ignition until fuel fumes have
evaporated.
The engine must necessarily be filled with engine oil before being put into
operation for the first time.
Check the oil level whenever the appliance is to be put into operation. Add
engine oil if necessary.
Carry out a visual inspection before any use to make sure the appliance,
especially the cutting tools, fastening parts and the entire cutting unit are
not damaged.
- Check all screw and plug-in connections and protective equipment if firm and tightened properly and whether all moving parts are running smooth whenever the appliance is to be put into operation.
- The protective equipment on the appliance is strictly prohibited to be disassembled, changed, used in conflict with the designation and it is prohibited to attach any protective equipment of other manufacturers.
- The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts..
- Do not start the engine before your feet are in a safe distance from the cutting tools.
- Do not incline the appliance when being started.
- Do not start the appliance when you are standing in front of the ejection opening.
- Make sure your posture is safe, especially on slopes. Do not cut on too steep slopes. Be particularly careful when changing travelling direction on slopes.
- Pay maximum attention when turning around and pulling the appliance to you..
- Switch the mower off whenever carrying or inclining it or when being outside a grass area. Wait until all rotating parts have stopped.
- If an undesirable item is encountered or the appliance starts vibrating, the appliance must be switched off and the socket plug removed. Check whether the appliance is not damaged. Repair any damage.
- Switch the appliance immediately off after finishing your work.
- Do not store the appliance in enclosed places just after being switched off but let it cool down outdoors instead.
- Never store the appliance with petrol in the tank inside a building where petrol fumes may potentially get in touch with open fire or sparks.
- Replace any defective muffler.
- Do not change the controlled engine setting and do not rev the engine up.
Maintenance
Switch the engine off and remove the socket plug before any work on the
engine. Wait until all rotating parts have stopped and the appliance has
cooled down.
Keep the appliance, especially the tank and engine, clean at all times. Clean
the ejection opening and cover at regular intervals.
Apply environment-friendly oil to all moving parts.
Check the collection bag at regular intervals for any wear and aging.
Refer all servicing to qualified service personnel.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance can serve as a satisfactory
aid. Insufficient maintenance and care can lead to unforeseen accidents and
injuries.
Guarantee
Warranty period of 12 months applies to commercial use and 24 months applies
to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defect or
manufacturing defect. Original payment voucher with the sales date needs to be
sub-mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorized
use such as appliance overloading, use of violence, damage as a result of any
unauthorized interference or caused by foreign items. Failing to follow the
operating and assembly instructions and common wear are also not included in
the guarantee.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bure- aucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:
- Serial No.:
- Art. No:
- Year of production:
Inspection and maintenance plan
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified hours of operation have expired.
Defects searching
