Hamron 27W LED Work Light Floodlight Instruction Manual

June 4, 2024
HAMRON

Hamron-LOGO

Hamron 27W LED Work Light Floodlight

Hamron-27W-LED-Work-Light-Floodlight-PRODUCT

SAFETY INSTRUCTIONS

SYMBOLS

  • Read the instructions.
  • Approved in accordance with the relevant directives.
  • Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

  • Voltage 12/24 V
  • Output 100 W
  • Luminous flux 9000 lm
  • Range 1 Lux at 630 m
  • Protection rating IP68
  • Colour temperature 5900 K
  • Size 203x177x100mm
  • Weight 2.4 kg

INSTALLATION

SPOTLIGHT AND BRACKET

Hamron-27W-LED-Work-Light-Floodlight-FIG-1

  1. Take the spotlight and bracket out of the packaging and orientate them as shown in the figure.
  2. Unpack the supplied screws, nuts and washers (M8x25, M10x30, M12x30) and insert the middle screw (M12x30) and both long screws (M10x30) in the base of the bracket as shown in the figure. Washers do not need to be fitted on the inside. Do not fully tighten the screw union before the spotlight is correctly installed.
  3. Fit the bracket on the spotlight housing with the remaining screws (M8x25) as shown in the figure.damaged or set of fire if a smaller cross-sectional area is used.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals