ARMITRON Skeleton 42mm Silver Mens Watch Instruction Manual
- June 28, 2024
- Armitron
Table of Contents
ARMITRON Skeleton 42mm Silver Mens Watch
Product Information
Specifications:
- Product Type : Analog Watch
- Features: Time, Date, Day functions
- Water Resistance : Yes
- Warranty: Lifetime warranty
Product Usage Instructions
Setting the Watch:
To set the time, day, or date on your analog watch, follow the specific instructions based on your watch style.
Standard Analog Watch Styles:
Pull the crown out to position C to change the time. Rotate the crown until the desired time is obtained. Push the crown back to position A to re-engage timekeeping.
Calendar & Day/Date Watch Styles:
Follow the same time-setting instructions as for standard analog watches.
Calendar Watches:
If your watch has a date window only, pull the crown out to position B and turn it in the appropriate direction to set the date. Push the crown back to position A to resume timekeeping.
Multi-Function Models:
Pull the crown from position 1 to position 2, and wind it clockwise or counterclockwise to set the desired time. Push the crown back to position after setting.
Changing the Battery:
If battery replacement is needed, refer to authorized service centers for assistance.
Water Resistance:
This watch is water-resistant; avoid operating push buttons underwater. In case of water ingress, promptly have the watch inspected to prevent damage.
Accelerating Energy of the Watch:
Wind the crown clockwise at position 1 to conserve energy.
Service Centers:
If maintenance or repairs are required, utilize Armitron Adventure-approved Service Centers for quality service using genuine parts and components.
Lifetime Warranty & Instructions Manual:
Refer to the provided instructions manual for detailed information on warranty coverage and servicing procedures.
FAQ
- Q: Can I return my watch for servicing where it was purchased?
- A: No, you cannot return the watch for servicing where it was purchased. Utilize Armitron Adventure-approved Service Centers for all servicing needs.
ANALOG WATCH INSTRUCTIONS
SETTING THE WATCH
These instructions apply to a variety of watch styles. To change the time, day or date on your analog watch simply follow the accompanying instructions according to your specific style.
A. NEUTRAL POSITION: This is the normal operating position of the watch
in which the crown is free to turn in either direction without any effect on
the time.
B. POSITION TO SET THE DATE : (for watches with date windows)
C. POSITION TO SET THE TIME
SETTING THE TIME ON STANDARD ANALOG WATCH STYLES
NOTE : The standard style has no calendar or day/date windows on the dial and, unlike the diagram, has only 2 crown positions: A (closed) and C(open).To change the time, pull the crown out all the way until it stops (position C). Rotate the crown in either direction until desired time is obtained. Next, push the crown all the way back to position A to re-engage time keeping. (If the watch has a second hand, it will begin to move.)
SETTING THE TIME ON CALENDAR & DAY/DATE WATCH STYLES
For time setting: Follow the above instructions.
SETTING THE TIME ON CALENDAR WATCHES
If your watch has a date window only, pull the crown out to position B (see diagram) and turn the crown in either a clockwise or counterclockwise direction (depending on the watch style). Continue to rotate the crown until the desired date is obtained. Push the crown all the way back to position A to re-engage timekeeping.
SETTING THE TIME, DAY & DATE OF MULTI-FUNCTION MODELS
TO ADVANCE THE HOURS AND MINUTES
Pull the crown out to position 3 when the second-hand reaches the 12 o’clock position. The second hand should stop at the 12 o’clock position. Next, turn the crown clockwise to advance the hour and minute hands to the desired time. When setting the minute hand, put in 5 minutes later than the time to be set and turn it back to the correct time. NOTE: that the 24-hour military sub-dial time zone also changes at the time of setting.Make sure that the 24 hour military time zone corresponds to the correct AM/PM time. Push the crown all the way back to position 1 when the desired time is obtained.
ADJUSTING THE TIME
Pull the crown from position 1 to position 2, and wind it clockwise or counterclockwise until it shows the desired time. After setting the time, push the crown back to position.
CHANGING THE BATTERY
Change the battery when the watch becomes slow, the readout darkens or does not appear, or the backlight fails. Before removing the old battery, be sure to denote its polarity so that the new battery is installed in exactly the same way. Replace with the same kind or equivalent only. This watch contains precise electronic components and should only be opened by a qualified watch technician. However, it is not necessary to return your watch to the manufacturer for battery replacement. It is recommended that you bring your timepiece to a local jeweler
WATER RESISTANCE
This is a WATER RESISTANT watch. Do not operate push buttons below the surface of the water. Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case.
SETTING THE DAY/DATE
If your watch has a date window only, pull the crown out to position B (see diagram). Rotate in either a clockwise or counterclockwise direction (depending on the watch style) to change the day or the date. Each turn of the crown will advance the day or date respectively. If the day does not advance using this method, pull the crown to position C and rotate until the time advances each 24 hour period. Continue to rotate the crown until the desired day is obtained. After the correct time has been set, push the crown all the way back to position A to re-engage timekeeping.
NOTE: During normal timekeeping (watch running with the crown in position A) the day and/ or date will advance between the hours of 11 pm and 5 am. Please keep this in mind when setting the watch.
TO ADVANCE THE DAY
Pull the crown out to position 3 and turn clockwise. Each full 24-hour turn will advance the day zone by one full day. Make sure that you then set the correct time worth the corresponding 24-hour military time. Push the crown all the way back to position 1 when the desired day and time is obtained.
TO ADVANCE THE DATE
Pull the crown out to position 2. Rotate the crown counterclockwise to advance the date. Push the crown all the way back to position 1 whendesired date is obtained. Do not set the date between 9PM and midnight as it will not change correctly
ACCELERATING ENERGY OF THE WATCH
Wind the crown clockwise at position 1 until energy is conserved.
USE OUR NATIONWIDE SERVICE CENTERS. YOU CANNOT RETURN WATCH FOR SERVICE WHERE IT WAS PURCHASED.
If your watch requires cleaning, lubrication, battery charging, or needs a crystal replaced, Armitron Adventure approved Service Centers are available in your area. These repair facilities use Armitron Adventure parts and components to assure quality and future performance. Free estimatesare available in advance, should you need servicing or repairs not covered under the warranty. Repairs covered under the warranty may require proof of purchase, so retain the purchase receipt.
LIFETIME WARRANTY & INSTRUCTIONS MANUAL
RETURN YOUR WATCH FOR SERVICING
Please call 718-482-4195 for a listing
of all approved and authorized service centers and locations, or visit our
website at: WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF PURCHASE. Carefully pack
your watch in a sturdy box (do not send in a gift box for same will not be
returned) and mail to the nearest approved authorized service station. Because
of possible loss, we recommend that you insure the watch, return receipt
requested, when using the mail. If you do not receive a receipt within a
reasonable time, start a tracer through the originating post office. Never
include a special watch band or any other article of personal value in your
shipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>