BRAUN T8-EZ5-GS-4FT-15W-30K-C 4FT Universal Fit LED Tube Instruction Manual
- June 4, 2024
- Braun
Table of Contents
T8-EZ5-GS-4FT-15W-30K-C 4FT Universal Fit LED Tube
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
DANGER – RISK OF SHOCK – DISCONNECT POWER BEFORE INSTALLATION.
The retrofit kits include LED tubes, instructions, and field-applied
labels.
Please confirm Lamp to Lamp
spacing minimum of 15cm before installing
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
-
WARNING – Risk of fire or electric shock. LED Retrofit Kit Installation requires knowledge of luminaires’ electrical systems. If not qualified, do not attempt installation.
Contact a qualified electrician. -
Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings.
-
Do not make or alter any open holes in an enclosure of wiring or electrical components during installation.
-
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
-
To avoid potential fire or shock hazards, do not use luminaires employing shunted, bi-pin lamp holders. NOTE: Shunted lamp holders are found only in fluorescent luminaires with Instant Start ballasts. Instant Start ballasts can be identified by the words “Instant Start” or “I.S.” marked on the ballast. This designation may be in the form of a statement pertaining to the ballast itself, or may be combined with the marking for the lamps with which the ballast is intended to be used, for example, F40T12/IS. For more information, contact the LED luminaire retrofit kit manufacturer.
-
Installers should not disconnect existing wires from lampholder terminals to make new connections at lamp holder terminals. Instead, installers should cut existing lampholder leads away from the lampholder and make new electrical connections to lampholder lead wires by employing applicable connectors.
-
Not for use with dimmers.
-
These products are not suitable for use with emergency exit fixtures or emergency exit lights.
Save all warnings and instructions for future reference.
Installation
One LED T8 Tube Installation
-
Shut off power before work.
-
Disconnect luminaire supply wirings L (Line) and N (Neutral) to the branch circuit as shown.
-
Install the LED T8 tube on the luminaire bracket.
-
Turn on the AC power source, LED Tube will light.
Installation of Multiple LED T8 Tubes
Repeat Steps 1 – 4
Visit our website at:http://www.harborfreight.com
Email our technical support
at:productsupport@harborfreight.com
For technical questions, please call
1-888-866-5797.
UPC 193175447326 58829 21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>