HAMRON 002677 Retaining Strap Instruction Manual
- June 4, 2024
- HAMRON
Table of Contents
HAMRON 002677 Retaining Strap
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions).
SAFETY INSTRUCTIONS
- Check load before use.
- Never exceed the maximum permitted load.
- Check the belt and tensioner before using.
- Do not use a damaged equipment.
- Keep the strap away from hot surfaces, sharp edges etc.
- Discard the strap if scratched, cut, unstitched, deformed by heat, etc.
TECHNICAL DATA
Max load | 68 kg |
---|---|
Dimensions | 2.4 m X Ø 6 mm |
USE
-
Insert the free end of the strap through the tensioner from underneath. Rotate the spool anticlockwise.
-
Fasten the hook. Wind the strap round the load. Fasten the hook. Pull tight the free end.
-
To release the strap, press the lever on the inside of the tensioner.
-
To secure the load better, fasten the hooks together on the strap and tensioner, and pull tight.
MAINTENANCE
REPLACING STRAP
If the strap is worn or if you need a longer strap, lift up thelever and rotate the spool to release. Feed in a new strap. The product can be used with approved, woven Ø 6 mm straps.
Jula reserves the right to make
changes. For latest version of operating instructions,
seewww.jula.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>