MOUNT-IT MI-3880B Anti Theft Countertop Tablet Stand Instruction Manual

MOUNT-IT MI-3880B Anti Theft Countertop Tablet Stand

Specifications

• Model: MI-3775B_G10 (Black), MI-3775W_G10 (White)
• Product: Anti-Theft Countertop Tablet Stand
• Weight Capacity: 33lbs
• Dimensions: 13.3″ x 5.1″ x 8.9″

FAQ

• Q: What should I do if I have missing parts?
• A: If you have missing parts, contact us at 855-925-5668 for free replacement parts.
• Q: What tablets are compatible with this stand?
• A: Compatible tablets include iPad Pro (10.5), iPad Air (10.5), iPad 9(10.2), iPad 8(10.2), iPad 7(10.2), and more. Refer to the Tablet Adapters for specific compatibility.

Thank you for choosing Mount It!

• Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact Mount-It! for assistance.
• CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
• Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. product failure and personal injury. are miccine or fanto content Mont H
• IMPORTANT: Ensure that you have received all parts according to the component checklist before installation. If any parts are missing or faulty, contact Mount-It! for a replacement.

MAINTENANCE

• Check that the product is secure and safe to use at regular intervals (at least every three months).

Mount and Accessories

• Check carefully to make sure there are no missing or defective parts. Some hardware provided may not be used. Use the correct mounting hardware suitable for your installation.
• CHOKING HAZARD. The package includes small parts.
• Not for children under 3 years. Adult supervision is required.
• Missing Parts? Call us at 855-925-5668 and we will ship replacement parts free of charge.

DIMENSIONS & WEIGHT CAPACITY

• Rated weight capacity is 33 lbs for the mount.

Caution

• Ensure all mounting surfaces are capable of holding the weight of your mount.
• DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
• SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

Installation Instructions

Step 1

• Step 1a Location and Use Options

Countertop Stand Option

• Peel the backing off the Rubber Pads (#D) and place them on the bottom of the Mount (#B) near each corner.
• Place the stand on the counter for use as a freestanding mount.

Wood Surface Installation

• To secure the stand base to a wood surface, use a 7/50″ bit and drill holes to a depth of 1.6″ and secure the stand base using 2x Lag Screws (#F). Do not over-tighten.
• Note: Ensure the mounting surface is thick enough to accommodate the length of the Lag Screws.

Concrete Surface Installation

• To secure the stand base to a concrete surface, use a 5/16″ Bit and drill holes to a depth of 1.8″. Clear any dust and debris from the holes and insert 2x Concrete Anchors (#G). Secure the stand base using 2x Lag Screws (#F). Do not over-tighten.
• Note: Ensure the mounting surface is thick enough to accommodate the length of the Lag Screws.

Concrete/Brick Wall Installation

• Using a bubble level to ensure straightness hold the Mount (#B) to the desired location on the wall and mark the centre of the mounting holes with a pencil.
• Use a 5/16” drill bit and drill on the marked locations to a depth of 1.8”. Clear any dust and debris from the holes and insert the Concrete Anchors (#G). Secure the Mount (#B) to the wall using Lag Bolts (#F).

Solid Wood Surface Wall Mounting Option

• Using a bubble level to ensure straightness hold the Mount (#B) to the desired location on the wall and mark the centre of the mounting holes with a pencil.
• Use a 7/50″ drill bit and drill on the marked locations to a depth of 1.6″. Secure the Mount (#B) to the wall using Lag Bolts (#F).

Step 2

Open the Tablet Case

• To open the Tablet Case (#A) insert the Key (#C) and turn counterclockwise to unlock (clockwise to lock.)

Step 3

Attach the Tablet Case to the Mount

• Attach the back half of the Tablet Case to the end of the Mount (#B) using Bolts (#E) through the 4 bolt holes on the interior of the Case in the orientation shown here.

Step 4

Select the Tablet Adapter

• Select the Tablet Adapter (#H, I, J) for your tablet (see the table on the next page for compatibility) and attach it over the tablet inside the case using the 4 Bolts (#K).
• Before fully tightening the bolts, centre the tablet in the adapter if needed by squeezing the tabs on the clamps and adjusting them left or right.

Insert the Tablet

• Select the appropriate Tablet Adapter for your tablet by referencing the compatibility guide below.

• Tablet Adapter (#I) can be used with the preinstalled soft button cover to allow for the tablet home button to be pressed, or it may be removed and replaced with the hard Button Cover (#L) which will prevent the tablet home button from being pressed.

Step 5

Cable Management

• Cables can be run through the back of the case as shown here, and through the base of the mount as needed.

Step 6

Rotation

• The tablet case can be rotated 90 degrees to alternate between landscape and portrait orientation.

• Visit us at www.mount-it.com for product registration and warranty information.
• Our US-based customer service team is standing by to answer any questions you have about your Mount-It! product.

CONTACT

• Available by phone Monday – Friday from 8:00 am to 4:00 pm PST.
• Chat live with an agent on our website!
• support@mount-it.com.
• 855-925-5668
• www.mount-it.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>