HQ POWER BTR4S6 2 X 6.5-Inch Ceiling Speakers User Manual

: June 5, 2024
: HQ-POWER

Table of Contents

Introduction
Safety Instructions
General Guidelines
Installation
Cleaning and Maintenance
Technical Specifications
Documents / Resources

BTR4S6 HQ POWER BTR4S6 2 X 6 5 Inch Ceiling
Speakers

USER MANUAL HQ POWER BTR4S6 2 X 6 5 Inch Ceiling Speakers -
fig

V. 02 – 03/06/2019
©Velleman nv
USER MANUAL
CEILING SPEAKERS
WIRELESS AUDIO AMPLIFIER

Introduction

To all residents of the European Union Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities.
Thank you for choosing HQPower™! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

| Read and understand this manual and all safety signs before using this appliance.
---|---
Indoor use only.
Class 2.
Power supply polarity.

This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
Do not immerse the device in any liquid. Keep the main unit away from high heat and fire.

General Guidelines

Refer to the Velleman ® Service and Quality Warranty on the last pages of this manual.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorized way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems. Keep this manual for future reference.

Installation

4.1 Speakers

Use the enclosed template to mark out the cut out.
Then, simply cut along the line.
Connect the speaker wires to the speaker.
Screw the speaker onto the installation surface. If desired, use additional adhesive strips.
Re-install the metal grill.

4.2 Amplifier

Install and connect the audio amplifier according to the diagram.
Power the amplifier [1]. You will hear a tone confirming the amplifier is switched on.
Switch on your audio source and enable the wireless function.
Search for the amplifier name [BTR4] and enter the password [0000]. When playing audio, the wireless audio input will take priority over the analogue input.

Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.

Technical Specifications

Amplifier
power supply ………………………….. 12 VDC, 2 A (not incl.)
RMS power ………………………………………. 2 x 15 W (8 Ω)
dimensions ………………………………….. 118 x 41 x 27 mm
weight ……………………………………………………….. 128 g
Speakers
power ………………………………………………….. 80 W max.
magnet …………………………………………………….. 6.4 oz.
frequency response………………………………. 80 Hz-18 kHz
impedance …………………………………………………….. 4 Ω
sensitivity …………………………………………………… 90 dB
dimensions …………………………………. 147 x 114 x 74 mm
weight ……………………………………………………….. 715 g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.hqpower.eu. The information in this manual is subject to change without prior notice.
RED Declaration of Conformity
Hereby, Velleman NV declares that the radio equipment type [BTR4S6] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.velleman.eu.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
All our products fulfill strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organizations. If, all precautionary measures notwithstanding, problems should occur, please make an appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU):

All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
Velleman® can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
Not covered by warranty:
– all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits; – consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
– flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
– flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
– damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally); – damage resulting from an inappropriate packing and shipping of the article;
– all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
Hint: In order to save on cost and time, please re-read the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
Repairs occurring after warranty expiration are subject to shipping costs.
The above conditions are without prejudice to all commercial warranties. The above enumeration is subject to modification according to the article (see article’s manual).