Shenzhen Bovision Technology BFA20 Battery Wi-Fi Camera User Guide
- June 6, 2024
- Shenzhen Bovision Technology
Table of Contents
Shenzhen Bovision Technology BFA20 Battery Wi-Fi Camera
What’s in the box
Please consult this checklist for all parts.
Install
Mode Bracket Installation 
- Fix the bracket on the wall
- install the camera in the bracket and lock it with the screw
Connect
Download
‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the App.
Add device
Log in the CloudEdge, select “Add Device”, and add the smart camera to the App according to the screen tips(Make the smart camera close to the router when configuring).
NOTE: lf you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.
FAQ
Q: Why is it still on the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened
Functions
-
Remote wake-up
The camera will be in sleep mode to save power; you can have a preview in App. -
Full-duplex audio
You can see and hear the visitor in your App from the camera. -
PIR
When the camera detects someone stopping by, it sends an alarm message to your cell phone. -
Low battery alarm
When the battery power is lower than your set, the App will send a notification to your mobile phone. -
Record
Using an SD card or opening the Cloud-Storage Service, to keep recording every moment. -
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.