MOUNT-IT MI-944 Mobile File Cabinet with 3 Drawers Instruction Manual

MOUNT-IT MI-944 Mobile File Cabinet with 3 Drawers

Product Information

Specifications:

• Model : MI-944
• Type : Mobile File Cabinet with 3 Drawers
• Package Contents:
  • (x4) +1 Washers
  • (x4) +1 Nuts
  • (x1) +1 Balancing Wheel
  • (x2) Locking Caster Wheels
  • (x2) Caster Wheels
  • (x1) File Cabinet
  • (x1) Wrench
  • (x1) Metal Bar

Product Usage Instructions:

Step 1: Installing the Back Wheels

1. Attach the caster wheels to the back of the file cabinet using the washers and nuts provided.
2. Use the wrench to tighten the wheels securely.

Step 2: Installing the Front Locking Casters

1. Remove the bottom drawer for better access.
2. Install the front 2 Locking Casters and tighten them with the wrench until secure.
3. Reinsert or close the bottom drawer and turn the file cabinet upright.

Note: Use the wrench provided to ensure all wheels are securely tightened.

FAQs

• Q: How do I adjust the file hanger?
  • A : To adjust the file hanger, follow these steps:
  • [Insert steps to adjust file hanger here]
• Q: What is the purpose of the metal bar included in the package?
  • A : The metal bar is used for [explain the purpose of the metal bar here].

Thank you for choosing Mount Lt!

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact Mount-It for assistance.
Reaso disely with wide as heavier than he stel were slated may result in unstable or seines person riu.

• Safety gear and proper tools must be used. This product should only be installed by professionals.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
  • IMPORTANT : E sure that you have received all paths providing our computed e-checklist print an installed pen. I any parts are missing or faulty, contact Mount-l!
  • MAINTENANGE. Chark that the product is secure and safe to use at regular intervals (at least every three months)

Package Contents

Check carefully to make sure there are no missing or defective parts. Some hardware provided may not be used. Use the correct mounting hardware suitable for your installation.  CHOKING HAZARD. The package includes small parts.

Not for children under 3 years. Adult supervision is required.

Missing Parts?

Call us at (855) 925-5668 and we will ship replacement parts free of charge.

Installation Instructions

Step 1: Installing the Back Wheels

• Turn the file cabinet upside down on a smooth and flat surface. Pull the bottom drawer out partway, then install the Non-Locking Casters (#C) to the 2 rear holes by placing a Washer (#E) over each hole and inserting the Non-Locking Casters through the washer and file cabinet hole. Secure them in place on the opposite side using Nuts #D) and tighten with the wrench until secure.

Step 2: Installing the Front Locking Casters

• Install the Locking Casters (#B) to the 2 front holes in the same order using Washers (#E) and Nuts (#D), and tighten with the wrench until secure. The drawer may need to be fully removed for better access to install the front 2 Locking Casters. Reinsert or close the bottom drawer and turn the file cabinet upright.

Adjust the File Hanger

• Adjust the File Hangar (#F) in the large drawer as shown to accommodate your hanging file folders. The file hanger adjusts the size to be compatible with F4, Legal, A4, and Letter file sizes. Additionally A4 file folders may be hung across the short length of the drawer without the use of the File Hanger or can be placed behind the hanger to use the full depth of the drawer.

• Before closing the drawer to lock, turn the key so the bolt is on the bottom.

Please scan this QR code to visit the product page.

HAVE QUESTIONS?

• Monday – Friday from 8:00 am – 4:00 pm PST
•  support@mount-it.com
• (855) 925-5668
•   www.mount-it.com

Visit us at www.mount-it.com for product registration and warranty information.
Our US-based customer service team is standing by to answer any questions you have about your Mount-It! product.
Available by phone Monday – Friday from 8:00am to 4:00 pm PST.

Chat live with an agent on our website!

• support@mount-it.com
• (855) 925-5668
•  www.mount-it.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>