dB TECHNOLOGIES DRK/SRK Fifty Flybar and Hanging Bracket Kit Instructions
- June 9, 2024
- dB Technologies
Table of Contents
DRK/SRK FIFTY FLYBAR AND HANGING BRACKET KIT
INSTRUCTIONS
DRK/SRK Fifty Flybar and Hanging Bracket Kit
DESCRIPTION: Flybar for FIFTY TOP speakers flown mounting
PACKAGE CONTENT
A. (4x) Link bracket
B. (6x) Link bracket
C. (16x) M10x30 screw
**CAUTION:** Only qualified personnel may use the SRK-FIFTY hanging
bracket kit. To prevent hazards to people, animals and/or objects, make sure
that the installation is stable and secure. Follow the safety regulations and
laws of the country in which you use the product. Install the product as
described in these instructions. To use this accessory safely, check that it
is working and intact before use.
CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON
WWW.DBTECHNOLOGIES.COM
INSTALLATION
-
In case of hanging a single FIFTY TOP speaker, fasten the flybar to the speaker using B screws as shown.
-
In case of hanging two FIFTY TOP speakers, the upper one must be stacked upside down.
The logo normally is on the bottom. Fasten the flybar to the speaker using B screws.
Please use SRK-FIFTY brackets (not included) to fasten the speakers. -
In case of hanging of two side by side or four FIFTY TOP speakers (two speakers x two rows), fasten the flybar to the speakers using B screws as shown and then fasten the speakers using SRK-FIFTY brackets.
-
Please use appropriate hanging points depending on the inclination.
CAUTION: According to EUROCODE 3 (EN 1993-1-1) / BGV C1, max 4 speakers
can be hung to DRK FIFTY flybar (two speakers x two rows). The maximum allowed
inclination is +30° (positive) pointing up and -25° (negative) pointing down.
Features, specification and appearance of products are subject to change
without notice. dB Technologies reserves the right to make changes or
improvements in design or manufacturing without assuming any obligation change
or improve products previously manufactured.
DESCRIPTION: Hanging bracket kit for FIFTY TOP speakers flown
mounting
PACKAGE CONTENT
A. (4x) Link bracket
B. (6x) Link bracket
C. (16x) M10x30 screw
CAUTION: Only qualified personnel may use the SRK-FIFTY hanging bracket
kit. To prevent hazards to people, animals and/or objects, make sure that the
installation is stable and secure. Follow the safety regulations and laws of
the country in which you use the product. Install the product as described in
these instructions. To use this accessory safely, check that it is working and
intact before use.
CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON
WWW.DBTECHNOLOGIES.COM
INSTALLATION 
- In case of hanging two FIFTY TOP speakers, first fasten the flybar DRK-FIFTY (not included) to the upper speaker, that must be stacked upside down; normally the logo is on the bottom. Place the A and B brackets and fasten using C screws as shown.
- Please use appropriate DRK-FIFTY flybar hanging points depending on the inclination.
WARNING: DRK-FIFTY flybar must be mounted before the SRK-FIFTY bracket
kit.
Features, specification and appearance of products are subject to change
without notice. dB Technologies reserves the right to make changes or
improvements in design or manufacturing without assuming any obligation change
or improve products previously manufactured.
DRK/SRK FIFTY
420120407Q REV.1.0
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA
BOLOGNA (ITALIA)
Tel +39 051 969870
Fax +39 051 969725
www.dbtechnologies.com
[email protected]