PHILIPS DDLE801 Leading Edge Dimmer Controller Instruction Manual
- June 4, 2024
- Philips
Table of Contents
PHILIPS DDLE801 Leading Edge Dimmer Controller
Devices must be installed in an approved enclosure by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
WHAT IS IN BOX
NOT IN BOX
DIMENSION
Installation Instructions
STEP1 STEP2 STEP3 STEP4 STEP5 STEP6 CAUTION
The manufacturer is not responsible for dimmable lamp selection. Each
lamp/dimmer combination must be tested for compatibility prior to
installation.
Installation of a home and building automation and control system shall comply with IEC 60364 (all parts). The temperature for the communication wires specified in IEC 60364-5-52 shall not be exceeded.
Professional dimmers rated > 1000 W are out of scope of EN 61000-3-2.
© 2022 Signify Holding. All rights reserved. Specifications are subject to
change without notice. No representation or warranty as to the accuracy or
completeness of the information included herein is given and any liability for
any action in reliance thereon is disclaimed. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips N.V. All other
trademarks are owned by Signify Holding or their respective owners.
www.lighting.philips.com/dynalite