MOUNT-IT MI-3880B_G10 Anti Theft Tablet Floor Stand with Height Adjustment Instruction Manual
- June 1, 2024
- Mount-It
Table of Contents
MOUNT-IT MI-3880B_G10 Anti Theft Tablet Floor Stand with Height
Adjustment
Product Information
Specifications:
- Model: MI-3783_G10
- Product Type: Anti-Theft Tablet Floor Stand with Height Adjustment
- Weight Capacity: 2.2lbs
- Height Range: 26.8-42.5 inches
Product Usage Instructions
Step 1: Attach the Base
Start by attaching the Base (B) to the Column (A) using the Base Connector (C)
and the provided M6x16 screws (D).
Step 2a: Wood Surface Installation
If mounting on a wood surface, follow the instructions for Wood Surface
Installation.
Step 2b: Concrete Surface Installation
If mounting on a concrete surface, follow the instructions for Concrete
Surface Installation.
Step 3: Open the Tablet Case
Remove the front cover from the Tablet Case (K) before proceeding.
Step 4: Attach the Tablet Case to the Column
Securely attach the Tablet Case to the Column (A) and insert the tablet into
the case.
Step 5: Select the Tablet Adapter
Choose the appropriate Tablet Adapter based on your tablet model to ensure
compatibility.
Step 6: Height Adjustment and Cable Management
Adjust the height of the stand as needed and manage cables using the provided
Cable Clips (M5x8).
Step 7: Final Adjustments
Make final adjustments to ensure the tablet is securely in place and the stand
is at the desired height.
Frequently Asked Questions (FAQ)
Q: What should I do if there are missing or defective parts?
A: Contact us at 855-925-5668 for
free replacement parts.
Q: What is the weight capacity of the stand?
A: The rated weight capacity is 2.2lbs. Do not exceed this limit to
prevent injury or damage.
Q: How do I know which Tablet Adapter to use?
A: Refer to the provided instructions to choose the correct Tablet
Adapter based on your tablet model for proper fit.
Please scan this QR code to visit the product page.
ANTI-THEFT TABLET FLOOR STAND WITH HEIGHT ADJUSTMENT
Thank you for choosing Mount-It!
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact Mount-It! for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact Mount-lt! for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
Mount and Accessories
Check carefully to make sure there are no missing or defective parts. Some hardware provided may not be used. Use the correct mounting hardware suitable for your installation.
CHOKING HAZARD. Package includes small parts.
Not for children under 3 years. Adult supervision is required.
Missing Parts? Call us at 855-925-5668 and we will ship replacement parts free of charge.
DIMENSIONS & WEIGHT CAPACITY
Rated weight capacity is 2.2lbs for the mount.
Caution:
Ensure all mounting surfaces are capable of holding the weight of your mount.
DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
ASSEMBLY INSTRUCTION
Step 1
Attach the Base
Attach the Column (#A) to the Base (#B) through the Base Connector (#C) using
Bolts (#D) as shown.
Step 2
Step 2a
Wood Surface Installation
To secure the stand base to a wood surface, use a 1/8” bit and drill holes to
a depth of 1.6” and secure the stand base using Lag Screws (#E). Do not
overtighten.
Step 2b
Concrete Surface Installation
To secure the stand base to a concrete surface, use a 5/16” Bit and drill
holes to a depth of 1.6”. Clear any dust and debris from the holes and insert
the Concrete Anchors (#F). Secure the stand base using Lag Screws (#E). Do not
overtighten.
Step 3
Open the Tablet Case
- To open the Tablet Case (#K) insert the Key (#Q) and turn counterclockwise to unlock(clockwise to lock.)
Step 4
Attach the Tablet Case to the Column
Attach the back half of the Tablet Case to the end of the column using Bolts
(#H) through the 4 bolt holes on the interior of the Case in the orientation
shown here.
Step 5
Select the Tablet Adapter
Select the Tablet Adapter (#L, M, N) for your tablet (see the table on the
next page for compatibility) and attach it over the tablet inside the case
using the 4 Bolts (#P). Before fully tightening the bolts, center the tablet
in the adapter if needed by squeezing the tabs on the clamps and adjusting
them left or right.
Insert the Tablet
Select the appropriate Tablet Adapter for your tablet by referencing the compatibility guide below.
Tablet Adapter (#M) can be used with the preinstalled soft button cover to allow for the tablet home button to be pressed, or it may be removed and replaced with the hard Button Cover (#O) which will prevent the tablet home button from being pressed.
Step 6
Height Adjustment and Cable Management
- To adjust the height of the Pole (#A) use Allen Key(#G) to loosen the bolt indicated in the magnification bubble, then raise the pole to the desired height and tighten the bolt in place once more.
- Route the cable through the recessed channel on the back of the Pole by securing it in place with Cable Clip(#I) on the upper portion of the pole if extended, and Cable Clip (#J) on the lower portion of the pole.
Step 7
Final Adjustments
The viewing angle can be adjusted in the range of -90° to +90°.
Visit us at www.mount-it.com for product registration and warranty information.
Our US based customer service team is standing by to answer any questions you
have about your Mount-It! product.
Available by phone Monday – Friday from 8:00am to 4:00pm PST.
Chat live with an agent on our website!
support@mount-it.com
(855)925-5668
www.mount-it.com