universal douglas RHBB200-850-UNV-216-90 LED High Bay Instruction Manual
- June 3, 2024
- universal douglas
Table of Contents
Instruction Manual
LED High Bay
**SAFETY WARNINGS
**
IMPORTANT SAFETY INFORMATION
Before you begin.
Read these instructions completely & carefully.
WARNING Risk of electrical shock The electrical rating of these products is
100-277 Vac or 277-480Vac, the installer must determine they have the correct
voltage at the luminaire before installation.
WARNING Risk of fire or electric shake I FO Commercial High Bay installation
requires knowledge of luminaire electrical systems. If not qualified, do not
attempt installation. Contact a qualified electrician.
WARNING Risk of damage. To prevent wiring damage or abrasion, do not expose
wiring to the edges of sheet metal or other sharp objects.
WARNING Risk of injury: Disconnect power installing the product or servicing
it.
WARNING Risk of injury: Wait until the fixture has cooled down before
installing or servicing the fixture.
Follow the information on the label &instructions regarding installation near
comb stble materials, insulation, and building materials & in Dry orbit
locations. DD not install in areas excised to combustible vapors or gases This
acclurt must be hstalled by a pascniania with construction and operation et
the product and the hawk invoked, in aocadare Mb the appfuble hstalaticti Be
suet° grind product to avoid potential electrical diockcr another potential
rind Useof accessary equipment not recarmended by the manufactuer or installed
inconsistent with instructions may se an trEefe condition. Do not completely
or partially dock light emerghg from product, ffilhis could caEe an trisafe
condition. Do not allow other items to we into contact with the product,
asthis maydatsean LIE& condition. Wislittalhis product maycontain
chemicalsknow to the State of Caifcmia to cause cater, birth defects, and/or
other reproductive harm. Thaoully vest) your bad after installing, servicing,
handling, cleaning, or otherwise touching this product lit device complies
with MCGISTilie 47 Pat 15, CeesA requirements for BAWL
**WHAT’S THE BOX
**
One (1) LED High Bay
TOOLS NEEDED
This LED High Bay requires very few tools for installation. A screwdriver and a pair of wirecutters will help to install the reflector and fasten the mounting hook.
INSTALLING LED HIGH BAY
BRACKETINSTALLATION
www.universaldouglas.com
Rev. 3/15/22
Universal Lighting Technologies
Documents / Resources
|
universal douglas RHBB200-850-UNV-216-90 LED High
Bay
[pdf] Instruction Manual
RHBB200-850-UNV-216-90 LED High Bay, RHBB200-850-UNV-216-90, LED High Bay,
High Bay, Bay
---|---