Cisco Catalyst Center Using Prime Data Migration Tool Instructions
- September 14, 2024
- Cisco
Table of Contents
Cisco Catalyst Center Using Prime Data Migration Tool
Cisco Catalyst Center Using Prime Data Migration Tool
This chapter provides information on migrating data and important points related to migrating Cisco Prime Infrastructure to Cisco Catalyst Center using the Prime Data Migration Tool Update 05.
- Prerequisites for Using Prime Data Migration Tool Update 05,
- Migrating Data from Cisco Prime Infrastructure to Cisco DNA Center using Prime Data Migration Tool Update 05,
- Important Notes,
Prerequisites for Using Prime
This section lists the prerequisites before using the Prime Data Migration Tool Update 05
- Ensure that you run the Cisco DNA Center AURA command line tool. The AURA tool performs a variety of health, scale, and upgrade readiness checks for the Cisco DNA Center and the rest of the Fabric network. AURA ensures that Cisco DNA Center and its component services are all healthy and available before you start a migration. For more information on using the Cisco DNA Center AURA tool, see Enhanced Visibility into the Cisco DNA Center using AURA.
- Ensure that you run the Cisco PDART (Cisco Prime Infrastructure Cisco DNA Center Assessment & Readiness Tool) analyze a Cisco Prime Infrastructure deployment and assess whether the Cisco DNA Center supports the current deployment. For more information, see Cisco PDART – A Cisco DNA Center Readiness tool for the Cisco Prime Infrastructure.
PI 3.10.4
Prerequisites for Using PI 3.10.4 Prime Data Migration Tool Update 05
Ensure that:
- You install Cisco Prime Infrastructure 3.10.4.
- You have Root or Super user access privileges of Cisco Prime Infrastructure.
- You have access credentials to the Cisco DNA Center.
- Refer to the Cisco Prime Infrastructure and Cisco DNA Center Compatibility Matrix,
PI 3.9.x
Prerequisites for Using PI 3.9.x Prime Data Migration Tool Update 05
Ensure that:
- You install Cisco Prime Infrastructure 3.9.1 + PI 3.9.1 Update 02 or PI 3.9 + PI 3.9 Oracle Patch + PI 3.9.1 + PI 3.9.1 Update 02 on upgrade.
- If you need support for Catalyst 9800 16.12.x version, you will need to install PI_3_9_Oct_Oracle_patch-1.0.8.ubf patch before you install PI 3.9.1. For instructions to install the Oracle Patch, see the Installing Cisco Prime Infrastructure System Patch 3.9 section in the Cisco Prime Infrastructure 3.9 Administrator Guide.
- You have Root or Super user access privileges of Cisco Prime Infrastructure.
- You have access credentials to the Cisco DNA Center.
- Refer to the Cisco Prime Infrastructure and Cisco DNA Center Compatibility Matrix,
PI 3.8.x
Prerequisites for Using PI 3.8.x Prime Data Migration Tool Update 05
Ensure that:
- You install Cisco Prime Infrastructure 3.8.1 Update 03.
- You have Root or Super user access privileges of Cisco Prime Infrastructure.
- You have access credentials to the Cisco DNA Center.
- Refer to the Cisco Prime Infrastructure and Cisco DNA Center Compatibility Matrix,
PI 3.7.x
Prerequisites for Using PI 3.7.x Prime Data Migration Tool Update 05
Ensure that:
- You install Cisco Prime Infrastructure 3.7.1 Update 06.
- You have Root or Super user access privileges of Cisco Prime Infrastructure.
- You have access credentials to the Cisco DNA Center.
- Refer to the Cisco Prime Infrastructure and Cisco DNA Center Compatibility Matrix,
Migrating Data from Cisco Prime Infrastructure to Cisco DNA Center using Prime Data Migration Tool Update 05
This section helps you to migrate your Cisco Prime Infrastructure data from:
- PI 3.10.4 to Cisco DNA Center using PI 3.10.4 Prime Data Migration Tool Update 05.
- PI 3.9.1 Update 02 to Cisco DNA Center using PI 3.9.x Prime Data Migration Tool Update 05.
- PI 3.8.1 update 03 to Cisco DNA Center using PI 3.8.x Prime Data Migration Tool Update 05.
- PI 3.7.1 update 06 to Cisco DNA Center using PI 3.7.x Prime Data Migration Tool Update 05.
Follow this procedure to access the Cisco Prime Infrastructure to Cisco DNA Center migration by logging in to Cisco Prime Infrastructure:
USING INSTRUCTION
Step 1
Choose Administration > Settings > System Settings > General > Prime Data Migration Tool, and then click Launch Prime Data Migration Tool to open the Prime Infrastructure – Prime Data Migration Tool page. For 3.9.1, and 3.10.4 you can either: Click Prime Data Migration Tool on the Mega Menu page. Or Launch the Prime Data Migration Tool on the Getting Started page. Choose Settings > Getting Started > Prime Data Migration Tool, and then click Launch Prime Data Migration Tool to open the Prime Infrastructure – Prime Data Migration Tool page. Before you launch the Prime Data Migration Tool, click Execute PDART to run the pre-assessment to analyze a Cisco Prime Infrastructure deployment and assess whether Cisco DNA Center supports the current deployment. To know more information on how to install and run the Cisco PDART, See Install and Run PDART.
Click Download Report to download the PDART report in pdf format.
Step 2
Click Job History, in the top-right corner of the Prime Data Migration
Tool, and the Prime Data Migration Job History window appears.
Step 3
In the Prime Data Migration Job History window, do the following:
- Click Force Sync to view the list of jobs that are force synced and the job details such as Cisco DNA Center IP, Start Time, End Time, Status, and Info. You can click on the i icon next to the status column of the corresponding jobs to view the detailed information. You can also click on the hyperlinked completed or failed status to view the respective job summary in the Job Summary window.
- Click Dynamic Sync to view the list of dynamically synced job details such as Cisco DNA Center IP, Start Time, End Time, Status, and Info. You can click on the i icon next to the status column of the corresponding jobs to view the detailed information.
- You can search for the job history by choosing a category from the drop-down list such as Groups/Maps, Devices, ISE, CMX, and Templates, or by using the search box. If you choose Devices ISE or CMX categories, enter the IP address in the search box and click Search to retrieve the job details.
Step 4 Click Download Logs in the top-right corner of the Prime Data
Migration Tool, to download the prime migration logs in the. ZIP format.
Step 5 Click Add Cisco DNA Center Server.
Step 6 Enter the following Cisco DNA Center server details:
- Server IP Address or Hostname.
- Username.
- Password.
- Confirm Password.
You can integrate only one Cisco DNA Center server at a time. When an invalid IP (invalid TOFU certificate) is added in the ‘IP Address’ field a pop-up will be displayed with the error message ‘Invalid Certificate’ and “To delete the existing certificate click here”. You can remove the invalid certificate directly from the TOFU certification user interface by clicking the click here hyperlink in the error message.
- Step 7 Click Save, to check server reachability.
- Step 8 (Optional) Click Multi Server Settings, to archive, and restore the data that is migrated from Prime Infrastructure to DNA Center. It is recommended to use this option after Force Sync. You can use the following options to archive the migrated data:
- List of Cisco DNA Center Archives Available – Displays the list of available archives.
- Back-up Current Cisco DNA Center Pairing – Backup the currently paired Cisco DNA Center server details in the migration tool.
- Back-up Current & Load Cisco DNA Center Archive – The Current Cisco DNA Center server and its details are backed up and you are prompted to load any other available archive by entering the IP address.
- Delete Cisco DNA Center Archive – Deletes the selected DNA Center archives.
Step 9 In the Sync Settings window:
- You can check for the Supported or Available Limits of the Cisco DNA Center server for the Site Groups/Site Maps , Devices, and Templates. Supported or Available Limits of Cisco DNA Center vary based on the Cisco DNA Center server core count. The Supported/Available limits are specified in the following table:
Table 1: Supported/Available Limits
DNAC Core| Site Groups/Site Maps| Devices|
Templates
---|---|---|---
44-Core| 500| 1000| 1000
56-Core| 1000| 4000| 1000
112-Core| 2000| 5000| 1000
- Check the Enables automatic synchronization of data integrated with Cisco DNA Center check box to automatically synchronize any updates to the set of migrated Groups, Devices, and CMX from Cisco Prime Infrastructure to Cisco DNA Center.
- Select the Include newly added data during dynamic synchronization check box to automatically migrate any new addition to the set of migrated Groups, Devices, and CMX from Cisco Prime Infrastructure to Cisco DNA Center.
Note
Dynamic Synchronization does not support add, update, or delete operations
for the already migrated data and will not synchronize the data automatically
for the following components:
- Maps
- CLI Templates
- ISE Server
Maps, CLI templates, and ISE server migration are achieved only by Force Sync.
- This check box is enabled only if you select the Enables automatic synchronization of data integrated with the Cisco DNA Center check box.
- During force synchronization, if the Enables automatic synchronization of data integrated with the Cisco DNA Center check box is enabled, any modifications that are made through force synchronization to the Location Group and Devices entities are dynamically synced in the Cisco DNA Center.
- If the Enables automatic synchronization of data integrated withthe Cisco DNA Center check box is selected, CMX is dynamically assigned to Cisco DNA Center floor groups, when Cisco Prime Infrastructure imports maps to CMX.
- If you select the Enable CMX settings check box, CMX will be pushed with floor groups. If you do not select the Enable CMX settings to check box, CMX data will not be pushed to the Cisco DNA Center server.
- If you select the Enable ISE settings check box, ISE server details will be pushed. If you do not select the Enable ISE settings check box, ISE data will not be pushed to the Cisco DNA Center server.
- Select the Migrate User Defined CLI Templates check box to migrate the user-defined CLI and/or Composite Templates to the Cisco DNA Center.
Step 10 Click Next to go to the Select Groups page.
Step 11 In the Select Groups window:
Expand the Usage Details section to view a summary of the site and device count details such as Recommended, Selected for Migration, and Available.
- Check the Sync only new selection checkbox to migrate only the newly selected groups for migration. If you click Force sync, only newly selected groups will be migrated to the DNA Center.
- Uncheck the Sync only new selection checkbox to migrate only the newly selected groups and groups which is already migrated.
- If you want to delete only the mapping from Prime data migration to Cisco DNA Center and retain the instances of migrated sites in the DNA Center for the current force sync, uncheck the Delete sites in Cisco DNA Center for the current Force Sync check box.
- Check the Delete sites in Cisco DNA Center for the current Force Sync check box to delete the sites from Cisco DNA Center and remove the mapping from prime data migration to Cisco DNA Center for the current force sync. Uncheck the Delete sites in Cisco DNA Center for the current Force Sync check box to remove the mapping from Prime Data Migration Tool to Cisco DNA Center for the current force sync.
- If you want to move an entire group hierarchy to the Cisco DNA Center, check the Replicate Parent Hierarchy check box and select the location groups in the Prime Infrastructure Location Groups pane. By default, when you select Site Groups, the buildings, floors, and associated maps are also selected. Click Select DNAC Parent below the Prime Infrastructure Location Groups pane to open the Cisco DNA Center Site Groups window.
Marked for Deletion label appears when you unselect an already migrated group with Delete sites in the Cisco DNA Center for the current Force Sync check box, checked. Marked for Unmapping label appears when you unselect an already migrated group with Delete sites in Cisco DNA Center for the current Force Sync check box, unchecked. Select Global from the Cisco DNA Center Site Groups pane under which you want to move the PI groups and click OK. The selected groups will be added to the Group Movement Log pane with the label Marked for Migration. Update Civic Location window pops up to enter the civic location details for the selected building if no location details are available. You can choose the Address or provide Latitude and Longitude values and click Save to update the civic details for the building which you selected.
- If you want to move only a building or a floor to the Cisco DNA Center under a different campus or area, click Select DNAC Parent below the Prime Infrastructure Location Groups pane to open the Cisco DNA Center SiteGroups window. Select a campus or an area from Cisco DNA Center Site Groups under which you need to move the building and select a building from Cisco DNA Center Site Groups under which you need to move the floor and click OK. The selected groups will be added in the Group Movement Log pane with the label marked for Migration.
If you click the Close or Cancel buttons in the Cisco DNA Center Site Groups window, the window closes without selecting any groups for migration and the Group Movement Log pane is not updated with the selected groups. After you move the groups from Prime Infrastructure to Cisco DNA Center, the Marked for Migration label appears on the moved groups. Already migrated groups from Prime Infrastructure to Cisco DNA Center appear with the label Migrated in the Prime Infrastructure Location Groups pane as well as the Group Movement Log pane. The count of selected groups for migration appears as Selected for Migration under Sites. The count of selected devices for migration appears as Selected for Migration under Devices in Usage details. Available groups count in Cisco DNA Center appears in the Available section under Sites and available devices count in Cisco DNA Center appears in the Available section under Devices in Usage details. The Prime Infrastructure Location Groups pane lists all the Cisco Prime Infrastructure groups irrespective of any virtual domain.
Note
- Cisco Prime Infrastructure does not migrate devices assigned in a “Campus” to the Cisco DNA Center when the migration tool is used. As a workaround, you can assign your devices to a “Building” or “Floor” type location group before using the migration tool.
- Devices assigned in the Location groups with ‘Dthe efault’ Group type are not migrated to Cithe sco DNA Center.
DNAC SBuilderder : To create sites directly in the Cisco DNA Center so that you can move your sites from Prime Infrastructure to the Cisco DNA Center, click DNAC Site Builder. In the DNAC Site Builder window, if you select the Area radio button, enter the following information:
- Site Name : Site name that you can create in Cisco DNA Center.
- Parent Site : Cisco DNA Center parent under which you can create the site.
In the DNAC Site Builder window, if you select the Building radio button to create a building in the Cisco DNA Center Area, enter the following information:
- Site Name: Building name that you can create in Cisco DNA Center.
- Parent Site: Cisco DNA Center parent under which you can create the building.
- Civic Location: Enter the civic location details under which you want to create the building.
- GPS (Latitude/Longitude): These coordinates are auto-populated.
Click Add to create a site or building in Cisco DNA Center and click Next.
Step 12 In the ISE & CMX Credentials window:
- Click the ISE tab to view the ISE server details that are present in Prime Infrastructure such as:
- Server Status
- Server IP
- Port
- Server Name
- Username
- Shared Secret: You must ensure that this shared secret field is not empty.
- Timeout: This value must not exceed 20.
- Retries
If no ISE server is present in Prime Infrastructure, a No data available message appears.
Click the CMX tab to view the list of associated CMX servers for selected groups with the following details:
- Credential Status
- Server IP address
- Device Name
- Username
- Password
- SSH Username
- SSH Password
You must update the SSH Username and SSH Password, if it is not available for the respective CMX. If the associated CMX is not found, then click Next.
Note
When the Cisco Prime Infrastructure – Cisco DNA Center migration tool is
active and auto sync is enabled, then CMX will be dynamically pushed to Cisco
DNA Center floor groups. Cisco DNA Center will there by track the location
data for assigned groups.
Step 13 If you check the Migrate User Defined CLI Templates check box in the Sync Settings page, then a new page Select CLI Templates appears after the CMX page.
Step 14 In the Select CLI Templates window:
- Non-migrated templates list all the available CLI or Composite User Defined Templates available in PrimeInfrastructure. You can select the templates that need to be migrated to the Cisco DNA Center.
- Migrated templates list all the migrated templates available in the Cisco DNA Center. You can either update or delete these templates.
By default, all the rows are selected. Selected templates from the list are updated and the deselected templates are deleted from Cisco DNA Center.
Step 15 Click Next.
Step 16 In the Summary window:
- You can view the overall summary of selected location groups, devices, associated maps, user-defined templates, CMX servers, and ISE servers before migrating to the Cisco DNA Center.
- Click the CLI templates tab to view the selected CLI templates listed here. Based on the device selection in the groups you can Add/Update or Delete the CLI/Composite user-defined Templatesthee is DNA Center.
- In the Sync Settings tab, you can view the summary of the sync status.
Step 17 Click Force Sync to push data to the Cisco DNA Center server after the first migration. A confirmation message appears that DNAC data will be overwritten by PI data by the Force Sync. Click Yes to proceed or No to stop Force Sync. A success message appears after the successful completion of the Force Sync operation.
What to do next
- If you want to revert the site hierarchy in Cisco DNA Center, uncheck the migrated groups in the Prime Data Migration tool and click Force Sync. This step deletes the migrated groups in Cisco DNA Center. If you want to revert the device assignment (devices will be unassigned from Cisco DNA Center sites and assigned to migrated groups if the same devices are present both in Cisco Prime Infrastructure groups and Cisco DNA Center sites), perform the following steps:
- Uncheck the migrated groups in the Prime Data Migration tool and click Force Sync. This step deletes the migrated groups and devices in Cisco DNA Center.
- Add and assign or provision the devices in Cisco DNA Center in the required sites. The pre-migration site hierarchy appears in Cisco DNA Center. To migrate your Cisco Prime Infrastructure data again using the Prime Data Migration Tool , unassign the devices in Cisco Prime Infrastructure for the required groups and migrate the data.
- Multi-DNAC is supported from Prime Data Migration Tool Update 02.0. This feature allows you to migrate to multiple DNAC clusters (one DNAC server at a time) and retain the migration data for each DNAC server.
- Refer to the important notes about Cisco Prime Infrastructure – Cisco DNA Center migration, see Important Notes.
Important Notes
This section contains important notes about Cisco Prime Infrastructure – Cisco DNA Center migration:
- You can integrate only one Cisco DNA Center server at a time.
- When the integration or initialization phase remains in the loading state for more than 5 minutes, check for any firewall restrictions, and ensure that no firewall restrictions are blocking or redirecting communication.
- You can migrate obstacles that are created within an image to the Cisco DNA Center.
- Maps Archives (tar.gz files) are to be deleted manually post migration from /opt/CSCOlumos/map archives if your system is running with low disk space.
- Maps Migration fails when you migrate other groups along with the outdoor area to a non-global area.
- Outdoor area migration is not supported in Prime Data Migration tool.
- You can migrate ISE Server and CLI Templates along with the group migration.
- Groups with empty/null civic location values will be ignored for migration.
- When migrating ISE from Prime Infrastructure to DNA Center, ISE gets added to DNA Center in the failed state. To avoid this make sure to do the following:
- Activate PXGrid on ISE
- Enable ERS on ISE
- ISE’s CLI and GUI password must be the same
- Cisco Catalyst 9800 Series Wireless Controllers can be managed in multiple Cisco Prime Infrastructure servers or Cisco DNA Center and Prime Infrastructure servers as long as the subscription limit is available. To get managed, a single Prime Infrastructure server consumes or requires 30 config telemetry subscriptions, and a single DNA Center requires 70 or more telemetry subscriptions. IOS XE – 17.6 and later versions support 128 telemetry subscriptions.
- To connect with Cisco.com, concerning SWIM and Software Update, you must install PI_3_9_1_Security_Update_01 UBF along with PI 3.9.x Prime Data Migration Tool Update 03 UBF or PI_3_8_1_Security_Update_01 UBF along with PI 3.8.x Prime Data Migration Tool Update 03 UBF.
- You use a single session of the migration at a time for the same Cisco Prime Infrastructure server and Cisco DNA Center server pair.
- Once the CMX is migrated to the Cisco DNA Center, it will not be managed by Cisco Prime Infrastructure.
- Any legacy devices that are not supported by the Cisco DNA Center chosen for migration will be added to the Cisco DNA Center inventory under the Device Type column -“Unsupported Cisco Device”.
- Devices managed with SNMP v2 and v3 can be migrated to the Cisco DNA Center.
- Any devices managed only with SNMP v1 or SNMP v3 with DES protocol of AuthPriv credentials in Cisco Prime Infrastructure cannotmigrate the theCthe is DNA Center.
- Also, bulk migration fails if any one of the devices is managed by SNMP v1 or v3 with DES protocol of AuthPriv credentials.
- Only the basic information of the groups will be migrated, but not the rules and profiles assigned to the group.
- After integration, while upgrading the Cisco DNA Center to an unsupported version, an error will be thrown as “Unsupported Version” and migration will stop.
- Access Points positioned in the maps in Cisco Prime Infrastructure will migrate to the Cisco DNA Center, only if we manage its WLC devices with CLI Credentials.
- For Composite template Migration – The associated template should not be a System template. If any composite template with a system template will not get migrated.
- During composite template migration, all the associated templates in the composite template should have the same device type. Otherwise, migration will fail.
- Specific composite template migration is not recommended till Cisco DNA Center 1.3.3.8 and 2.1.1.3. However, it works in later DNA Center versions.
- DNA Center Version 2.2.1.0 specific update.
- Civic location is mandatory for Location Groups / Site groups migration, especially from Cthe isco DNA Center 2.2.1.0 version.
Migrate Cisco Prime Infrastructure Data to Cisco Catalyst Center Using Prime Data Migration Tool Update 05