Kaleido M1S Straight Fire Coffee Bean Roaster Instruction Manual

Kaleido M1S Straight Fire Coffee Bean Roaster

Specifications:

• Product Name: Sniper M1
• Type: Coffee Bean Roaster
• Model: M1

Product Overview:

The Sniper M1 is a straight-fire coffee bean roaster designed for easy and efficient roasting of coffee beans. The product features a stirring motor, exhaust pipe, into bean funnel, sampling lamp, carry handle, sample collector, and heat shield.

Installation Instructions:

1. Place the roaster in a well-ventilated area away from flammable materials.
2. Ensure the exhaust vents are not covered to allow proper ventilation.
3. Plug in the power cord after installation is complete.

Product Usage Instructions

1. Do not leave the roaster unattended during operation to prevent overheating and burning of coffee beans.
2. Stir the bean bin while heating to prevent deformation due to uneven heat distribution.
3. Avoid over-roasting coffee beans to maintain flavor and quality.
4. Clean the silver peel of coffee beans promptly to prevent burning.
5. After roasting, stir the bean cabin and turn on the exhaust smoke. Turn off the roaster when the bean temperature drops below 50 degrees.

Maintenance and Replacement Parts:
Refer to the maintenance section in the user manual for detailed instructions on cleaning and replacing parts. Contact customer service for any maintenance issues or replacement parts needed.

FAQ:

• Q: What should I do if the heating pipe does not work upon receiving the machine?
  A: If the heating pipe is not working, contact customer service for assistance. It may be due to transportation damage, and a replacement may be required.

• Q: Is it normal to experience a smell of spray paint from the new equipment?
  A: Yes, it is normal for new equipment to have a smell of spray paint initially. This smell will dissipate after a few rounds of roasting.

Thank you very much for purchasing Kaleido products

• Please read this manual carefully to ensure the correct and safe use of this product.
• Please carefully read the “Important Notes” and “Safety Warnings” (Page 2) before use.
• Please keep this manual properly for future use.
• Kaleido will not be responsible for the improper operation of this product or failure to follow the relevant instructions.

The warranty certificate is attached separately

Important note:
The following problems will occur due to the inevitable falling of articles during transportation:

Please be sure to confirm receipt after the unpacking inspection. If the shell is bumped, contact customer service to send a new shell. (If the paint is knocked off in special parts, contact the customer service to replace the machine)
When the machine is received, the heating pipe does not work in two cases:

1. The heating tube glass tube is broken due to the vibration during logistics transportation, and the heating tube cannot work.
2. The heating wire is broken due to vibration during logistics transportation, and the heating pipe cannot work after 1-3 times using the machine.

warning

To ensure the safety of use and avoid causing injury and property loss to you and others

• Safety warnings must be learned. It is forbidden for nonlearners to operate the baking machine. Children should stay away from the baking machine.
• Do not open the rear cover plate when power is on. Nonprofessionals shall not carry out live maintenance. When replacing accessories, unplug the power plug before opening the rear cover plate. Only after the replacement is completed can the machine be plugged in and tested. Over-roasting of coffee beans is prohibited.
• Do not wet the power socket with water.
• Please do not leave during roasting! Avoid excessive heating and burning of coffee beans due to no supervision.
• When heating, the bean bin must be stirred, otherwise the bean bin will be deformed due to excessive heat on one side.
• The set bean temperature should not exceed 230 degrees.
• The silver peel of coffee beans collected should be cleaned in time to avoid burning due to the accumulation of silver peel.
• The device must be placed in a well-ventilated place, and no flammable materials behind it. Do not cover the exhaust vents. During the baking and heating, the surface temperature of the equipment is high.Do not touch the surface of the device to avoid burns. (The red area is the high-temperature area)
• After roasting is completed, stir the bean cabin and turn on the exhaust smoke. And turn off the roaster after the temperature of the beans drops below 50 degrees.
• The new equipment will have some smell of the spray paint, and it will dispel after baking 2-3 times.

Product Overview

Installation Instructions

Coffee roaster installation and upper cover and rear cover removal

1. After opening the package, M 1 does not need to be installed, just connect the touch screen and USB connector. And power on then you can use it.
2. Remove the back cover, just remove one screw.

Performance parameter table

M1 is compact, powerful, and integrates with many new technologies. It is a powerful weapon for roasting coffee beans.
Scope of application: sample bean roasting, cup test roasting, fine coffee bean roasting, coffee training and teaching, coffee shop self-use and sales bean roasting, various coffee places, etc.

Capacity description

Technical parameter

Maintenance and replacement parts

M1 is very easy and simple to maintain.
Daily maintenance: Clean the tiny silver skin and dust remaining in the boiler. Clean deflated beans and crushed beans on the bean bin grid!

Heating tube replacement:

• If the heating tube reaches the service life. (5000-8000 hours life)
• You can Remove the screws of the back cover on the top of the machine and remove the back cover.
• Loosen the two nuts of the heating tube, disconnect the heating tube connection
• You can remove the old heating tube and install the new one.
• Tighten the two nuts and connect the wire, then it is ready to use.
• The heating tube wire does not have a positive or negative.

Warning:

For maintenance or replacement of accessories, the plug must be unplugged before operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>