XIAMEN Z0003NI Rn Wcbs User Manual

XIAMEN Z0003NI Rn Wcbs

USER MANUAL

Model: Z0003NI

Manufacturer: Faurecia Clarion Electronics (Xiamen) Co., Ltd

Address: 6F,No.40,Guanri Road, Software Park Stage II, Xiamen, China

Part 1 Style figure

1.1 Appearance diagram

1.2 Installation diagram

Fitting force < 70 N

1.3 Pin definition

Part 2: Product Features and Sepcification

(To the rubber mat surface)
Operating Frequency| 120 kHz
Coil Type| Single Pattern Coil
Mechanical| Size (mm)| 136mm x 95mm
Weight (g)| 240 g
NFC| NFC card detection| ISO14443A, ISO14443B,
ISO15693 and FeliCa™
ISO 18092 (NFCIP-1) Active P2P
Operating Frequency| 13.56 MHz
EMC/EMF| EMC Regulation| ECE R10.05
EMF| ICNIRP1998
Electrical| Operating Voltage| 9V ~ 16V
12V (Design Voltage)
Maximum Current| 3.89A
Stand by Current| ≤ 130 mA
Temperature| Operating Temp.| -30 ~ 60°C
Thermal Shutdown @ Surface| 60°C
Foreign Object Detection (FOD)| Support: Q factor and Power loss
detection
Cooling| Passive Cooling
SW| Architecture| AutoSAR 4.3.0
Updating| SW Update| via CAN

Part 3 Statement

Warning

The parts must be installed by Plant, can’t be assembly by Ending Customer.

FCC warning： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE warning ：The distance between user and products should be no less than 20cm.

15.105(b):

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provid e reasonable protection against harmful interference in a residential installation. This equ ipment generates uses and can radiate radio frequency energy and, if not installed and u sed in accordance with the instructions, may cause harmful interference to radio commun ications. However, there is no guarantee that interference will not occur in a particular ins tallation. If this equipment does cause harmful interference to radio or television receptio n, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC Part 15.21 information for user
You are cautioned that changes or modifications not expressly approved by the party res ponsible for compliance could void your authority to operate the equipment.

Specifications

• Model: Z0003NI

• Manufacturer: Faurecia Clarion Electronics (Xiamen) Co., Ltd.

• Address: 6F, No.40, Guanri Road, Software Park Stage II, Xiamen, China

• Fitting Force: 70N

• Feature: Wireless Charging (WPC)

• Mechanical: NFC

• Characteristics: Standard

• Max. Received Power: 15W

• Max. Efficiency: 70% in the Center

• Charging Distance: Not specified

• Operating Frequency: Not specified

• Coil Type: Not specified

• Size (mm): Not specified

• Weight (g): Not specified

• NFC Card Detection: Yes

• EMC/EMF Electrical Temperature: Not specified

• Operating Voltage: Not specified

• Maximum Current: Not specified

• Standby Current: Not specified

• Operating Temp: Not specified

• Thermal Shutdown @ Surface: Not specified

Frequently Asked Questions (FAQ)

Q: What is the maximum received power of the product?

A: The maximum received power is 15W.

Q: Does the product support NFC card detection?

A: Yes, the product supports NFC card detection.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>