XIAMEN Y811 Shipping Label Printer User Guide
- June 1, 2024
- Xiamen
Table of Contents
XIAMEN Y811 Shipping Label Printer
Specifications
- Method: Direct Thermal
- Resolution: 203 dpi
- Max Printing Speed: 150 mm/s
- Paper Width: 40-110 mm (1.57-4.3 inches)
- Paper Thickness: 0.06-0.25 mm
- Power Adapter: 24V / 2.5A
- Printing Life: TPH 100Km
- Operating Environment: Direct Thermal
Product Usage Instructions
Product Introduction
The package includes:
- Printer
- USB Cable
- User Manual
- Labels
- Power Adapter
- Power Cord
Printer Overview
The printer features:
- Feeder button and status light
- Cover button
- Power switch
- USB connector
- DC power connector
Bluetooth Connection for Smartphone/Tablet
The printer is suitable for Bluetooth of mobile phones and tablets, not
compatible with computers. Use the FlashLabel Print app for connection.
FAQ
Q: What should I do if contents are missing or damaged?
A: Please contact us for assistance.
Q: How do I connect the printer via Bluetooth?
A: Use the FlashLabel Print app on your smartphone or tablet for
Bluetooth connection.
Product Introduction
What’s in the package?
- A. Printer
- B. Labels
- C. USB Cable
- D. Power Adapter
- E. Power Cord
- F. User Manual
If contents are missing or damaged, please contact us
Printer Overview
Set Up The Printer
Bluetooth connection forSmartphone/Tablet
The printer is suitable for bluetooth of mobile phones andtablets, not
compatible with bluetooth of computers,Andthe printer cannot be connected
directly via the Bluetoothofthe device, it needs to be connected using the
FlashLabelPrint APP
Quick printer connection
- Please follow the sequence of the above picture to operate.
Label setup
Automatic label identification:
-
Load no less than 4 consecutive labels into the printer.
-
After the paper is stable,press and hold feeder button, until you hear a beep.
Then, the printer will automatically label identification. -
Then, the printer will automatically label identification.
Driver installation
Driver download website: https://help.flashlabel.com/support/solutions
App: FlashLabel
When changing the label printing size, you need to click “Learn Label” before
starting printing.
- Please run the downloaded software from the web address indicated above and follow the prompts to complete installation.
Windows Driver Installations
Mac Driver Installation
Pro Tips
Anytime you change your label, run the automatic label identification.
Press the feeder button on the printer to skip a blank label.
To run a self-test, press and hold the feeder button until you hear two short
beeps.
To ensure your printing quality, please use high quality labels.
If you use other brands’ label paper, please run “automatic label
identification” before printing.
Regularly clean the printer head.
If the paper isjammed and the red light fashes, run Automatic label identi
Xication.
Insert U-Disk into the same USB port on your computer every time. This will
avoid creating duplicate copies ofthe printer in your operating system.
FAQ
FAO Xle, please contact us.
LED Status
Light | Description | Troubleshoot |
---|---|---|
Blue | Normal operation | / |
Flashing Red (every 2 seconds) | Label paper is not identified | Run automatic |
label identification
Flashing Red (every 1 second)| Cover is not closed| Check that the cover is
completely closed
Flashing Blue and Red| Printer head is overheated| Printer will automatically
resume once the printer head has cooled down
Green| Bluetooth connected|
Feeder Button Instruction
Printer status | Feeder button | Function |
---|---|---|
Printing | Press the button | Pause printing |
Standby | Press and hold on until you hear one beep | Automatic label |
identification
Standby| Press and hold on until you hear five beeps| Reset Printer
Specification
Method | Direct Thermal |
---|---|
Resolution | 203 dpi |
Max Printing Speed | 150 mm/s |
Paper Width | 40-110 mm (1.57-4.3inches) |
Paper Thickness | 0.06-0.25 mm |
Power Adapter | 24V / 2.5A |
Printing Life | TPH 100Km |
Operating Environment | Temperature: o to 45°C |
Humidity: 10-90%(non condensing)
Storage Environment| Temperature: -10 to 50 °C Humidity: 10-80% (non
condensing
Connection| USB
Weight| 1.76 lbs/0.8kg
Dimensions| 182x99x87mm(LWH)
Safety Notices
- The printer head can become very hot after printing labels. Do not touch the printer head.
- Do not bend the power cord excessively or place objects on the cord.
- Do not use the printer ifyou find any irregularities asthese could result in fire or electrocution.
- Keep the printer out of reach of children.
- Use only approved accessories and do not try to disassemble, repair the unit by yourself.
- Keep the printer away from water and other objects that could penetrate the components.
- Please unplug the printer when it is not in use for long periods.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.