Xiamen Hanin Electronic Technology H11 Label Printer User Guide
- June 3, 2024
- Xiamen Hanin Electronic Technology
Table of Contents
Xiamen Hanin Electronic Technology H11 Label Printer
Product Introduction
Appearance and Components
Packing List
Product Introduction
LED Indicator Status
- Red LED Error Status
- ON: Error (Paper jam/Paper end/Cover opened)
- Slow Flash: Low power
- Quick Flash: TPH is over temperature
- White LED Basic Status.
- ON: Charging finished/Printer is ready
- Slow Flash: Charging
Touch Button Operation
- Hold down the power touch button for a few seconds: Turn on/off the printer
- Double click the power touch button: Position and calibrate the location of thermal label paper and heating line
Paper Loading
- Open the top cover by the hook position as the direction shown in the figure.
- Load the paper as shown on the right.
- Close the cover and pull some extra paper
App Download
Scan the QR code to download App
Connection and Printing
- Turn on Bluetooth of mobile phone, then open App, select“ H11” in the device list. Click“ Search device” and find“ H11-XXXX”, click it to connect.
- Select“ Scan to get template”, scan the QR code on the roll core to get the template
- Edit the label as need, and then click“ Print” after editing
Note: App operation shall be subject to the latest version.
Battery Charging
When the battery power is low, the red LED indicator will flash slowly. Please
charge it by the exclusive USB cable in time. If you continue printing, it may
power off automatically.
Note: The printer can be charged via computer USB port or AC adapter. Please note that the AC adapter is not supplied.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
Note: All the drawings of product and accessories in the manual are for
reference only, please subject to the actual product.
Xiamen Hanin Electronic Technology Co., Ltd.
E-mail : support@myqutie.com
Web : www.myqutie.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>