niko 552-720X1 Wireless Battery Powered Switch Onefold Zigbee User Manual

June 10, 2024
niko

niko 552-720X1 Wireless Battery Powered Switch Onefold Zigbee

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
PRO

Product Information

The product is a wireless switch designed for use with the Niko Home Control system. It is available in three different models: Niko Original, Niko Intense and Niko Pure. The switch operates on a battery and has a maximum operating range of 10m (30m for some models) when used with the Niko Home Control system. The switch can also be used in a standalone mode if required.

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in a Niko Home Control installation (max. fifty Zigbee® devices) or connected to a third-party Zigbee® system as a standard dimmer switch (ON/OFF/dimming) via EZ-mode pairing. The switch also supports Touchlink or Find&Bind to pair with up to eight Zigbee® receivers (ON/OFF/dimming) for stand-alone use or decentral networks. The wireless Zigbee® switch is battery powered with a lifetime of at least five years, based on twenty short press actuations a day. The variant with a plastic baseplate (552-72001) is used for wall installation. Fixation is possible with double-sided adhesive tape (included) or screws (excluded). For flush-mounting box installation, use variant 552-72011 together with the metal baseplate (552-720X0) suitable for your region.

Dimensions

  • Width: 71mm
  • Height: 46mm
  • Depth: 10mm – 85mm (depending on model)

552-72001

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(1\)

552-72011

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(2\)

Network

Install the onefold wireless battery-powered Zigbee® switch within 10 m of a Zigbee® receiver. Battery-powered Zigbee® devices act as endpoints and do not support Zigbee® mesh networking. For more information on Zigbee® network principles and signal range, consult guide.niko.eu.

Also, respect a minimum distance of 2 m between a Zigbee® device (including the smart hub) and another RF transmitter (for example a Wi-Fi device) or devices such as motors, pumps, electronic LED transformers, solar panel inverters, home battery storage.

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(3\) niko-552-720X1
-Wireless-Battery-Powered-Switch-Onefold-Zigbee- \(4\)

Installation

  1. Ensure that the wireless smart hub (552-00001) or wireless bridge (550-00640) is switched on.
  2. If connecting to the Niko Home Control system, consult the guide.niko.eu website for more information about installation and connected use.
  3. If using the switch in standalone mode, simply mount the switch to the desired location using the supplied mounting hardware.

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(5\) niko-552-720X1
-Wireless-Battery-Powered-Switch-Onefold-Zigbee- \(6\)

Battery replacement

Stand-alone use
The onefold wireless battery-powered Zigbee® switch (522-720X1) can be used in stand-alone mode without a gateway. In this mode, the switch can be paired with up to eight Zigbee® receivers (ON/OFF/dimming), such as a smart Zigbee® 3.0 lamp. Pairing is done via Touchlink or Find&Bind.

Touchlink pairing
Reset all Zigbee® devices if they were previously connected to another Zigbee® network. See § Reset. For Find&Bind pairing consult guide.niko.eu.

Connected use

  1. Connected to a Niko Home Control installation
    More advanced functionalities become available if you connect this device to your wireless smart hub (552-00001) or wireless bridge (550-00640) using the Niko Home Control programming software or Niko Home app. Consult guide.niko.eu for more information about the installation and the connected use.
    Download the Niko Home Control programming software:

    1. Reset the Niko Zigbee® device if it is already connected to another network. See § Reset
    2. Follow the onboarding procedure in the Niko Home Control programming software or the Niko Home app to add new Niko Zigbee® devices
    3. Set the Niko Zigbee® device in EZ-mode by pressing the switch button 3 x within 6 seconds > see the image on ‘EZ-mode pairing’. The blue PROGRAM LED starts blinking for max. 90 seconds
    4. The Zigbee® device is successfully added to the Niko Home Control installation when the blue PROGRAM LED is ON for 4 seconds and then turns OFF again.
  2. Connected to a third-party Zigbee® network
    The onefold wireless battery-powered Zigbee® switch can be connected to a third-party network via EZ-mode pairing. Refer to the third-party software or smartphone app to link a specific button of the battery-powered Zigbee® switch to an actor within the third-party network. You can also use Find&Bind pairing. Consult guide.niko.eu and the manufacturer’s manual for more information on using third-party Zigbee® devices in their network. Note that specific Niko Home Control functions will not be enabled when Niko Zigbee® devices are connected to a third-party Zigbee® gateway. See also the disclaimer at http://www.niko.eu/zigbee.

Online guide

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(17\)

guide.niko.eu

Product Usage Instructions

To use the wireless switch:

  1. If using with the Niko Home Control system, pair the switch with the system using the provided software or app.
  2. If using in standalone mode, press the switch button as required to control the desired device.
  3. If the switch is battery-powered, replace the battery when the low battery indicator is displayed.
  4. If the receiver does not respond when the switch button is pressed, ensure that the switch is paired with the receiver and that the receiver is within range. If necessary, move the switch closer to the receiver or use a range extender such as a 230V receiver’s radio coverage or a third-party system.

LED behavior

niko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(18\)

Resetniko-552-720X1-Wireless-Battery-Powered-Switch-Onefold-Zigbee-
\(19\)

Troubleshooting

Problem Cause Action

The battery-powered switch cannot be found in the Niko Home app or programming software| The power supply of the wireless smart hub for Niko Home Control is OFF| Switch on the power supply of the wireless smart hub for Niko Home Control
A battery low warning is displayed in the app| The battery of the switch is drained| Replace the battery of the switch with a new one
The receiver never responds when I press the switch button| The switch is not paired with the receiver or the battery voltage level is below the minimum threshold| Pair the switch with the receiver, or use a closer to the
receiver or use a range extender such as a 230V receiver’s radiocoverage or a third-party system.
Problem| Cause| Action
---|---|---
The battery- powered switch cannot be found in the Niko Home app or programming software| The power supply of the wireless smart hub for Niko Home Control is OFF| Switch on the power supply of the wireless smart hub for Niko Home Control
The battery of the Zigbee® switch is drained| A battery low warning is displayed on the Niko Home Control Home app. A battery low indication

(red-coloured LED) will only be shown on the Zigbee® device after a long press on the PROGRAM button (see § Reset). Replace

the coin cell battery (refer to § Battery replacement). Mind that the PROGRAM LED remains OFF when the battery voltage level is below the minimum threshold

The receiver never responds when I press a Zigbee ® switch button in stand-alone use| The battery of the Zigbee® switch is drained
The Zigbee® switch is not correctly paired with the receiver| Reset the Zigbee® battery-pow- ered switch if it was paired to another Zigbee® network. Pair the switch to a stand-alone receiver, Niko Home Control, or a third-party Zigbee® network. See guide.niko.eu for more details
Another Zigbee® battery-powered switch is paired with the receiver
The Zigbee® battery-powered switch is mounted outside of the receiver’s radio coverage or is sometimes moved outside the range| Move the Niko Zigbee® switch closer to the receiver or use a range extender such as a 230 V powered Zigbee® 3.0 device in a Niko Home Control installation or third-party system
The radio path is obstructed, which attenuates the radio signal| Reposition the Zigbee® switch or use a range extender such as a 230 V powered Zigbee® 3.0 device in a Niko Home Control installation or third-party system
A jammer or a source of interference is blocking the telegrams from the Zigbee® battery-powered switch to the receiver| Reposition the Zigbee® switch or Zigbee® receiver. Remove the interfering device or use a range extender such as a 230 V

powered Zigbee® 3.0 device in a Niko Home Control installation or third-party system

The Zigbee® battery-pow- ered switch is defective| Replace the switch and pair the new Zigbee® battery-powered switch with the receiver. Both devices may have to be reset first
The receiver is defective| Replace the receiver and pair it with the new Zigbee® receiver
The receiver doesn’t always respond when I press the Niko Zigbee ® battery-pow- ered switch| The receiver is located at the border of the radio coverage area| Install the switch closer to the receiver or use a range extender such as a 230 V powered Zig- bee® 3.0 device in a Niko Home Control installation or third-party system
A jammer or a source of interference is blocking the telegrams from the Niko Zigbee® battery-powered switch to the receiver| Reposition the Zigbee® switch or receiver, remove the interfering device or use a range extender such as a 230 V powered Zig- bee® 3.0 device in a Niko Home Control installation or third-party system

Specifications

  • Article number …………………………………………………………..552-721X1
  • Power supply ………………………………………………… 3 V battery, CR2450
  • Battery life span ………………………………… 5 years at 20 actuations/day
  • Protocol ………………………………………………………. Zigbee® 3.0, 2.4 GHz
  • Mounting method 552-72001 …………………………………..wall mounting
  • Mounting method 552-72011 ……… flush-mounting box in combination with metal baseplate 552-720X0
  • Flush-mounting box specifications.
    • depth = min. 40 mm
    • claw/screw fixing = 60 mm
    • inner diameter box = 60 mm
    • multiple boxes centre distance horizontal = 71 mm
    • multiple boxes centre distance vertical = 71 mm
    • multiple boxes centre distance vertical = 60 mm for BE and FR
  • Mounting height ……………………………………………………. 105 – 120 cm
  • Dimensions with Niko Original or Niko Pure faceplate (HxWxD) ……………………………………………………………………………. 83 x 83 x 15 mm
  • Dimensions with Niko Intense faceplate (HxWxD) ………………………………………………………………………………………………… 85 x 85 x 15 mm
  • Protection degree ………………………………………………………………..IP20
  • Maximum range (between switch and smart hub or wireless bridge) ………………………………………. 10 m (longer ranges possible with meshing capability of 230 V connected Zigbee® devices)
  • Maximum per installation
    • max. 50 connected Zigbee® devices per
    • Niko Home Control installation
    • stand-alone: max. 8 Zigbee® receivers
    • (ON/OFF/dimming) per switch
  • Operating frequency ………………………………………………………..2.4 GHz
  • Antenna ………………………………………………………….. integrated antenna
  • Maximum RF power …………………………………………………..8 dBm EIRP
  • Ambient temperature operation ………………………………..5 °C – 30 °C
  • Ambient temperature storage …………………………………..0 °C – 40 °C
  • Humidity ………………………… 0 – 95 % relative humidity, non-condensing
  • Weight 552-72001 ………………………………………………………. 23 g ±1 g
  • Weight 552-72011 ………………………………………………………. 17 g ±1 g
  • System compatibility …………………………………………talks with Homey
  • Marking …………………………………………………………………… CE, Zigbee®

Warnings regarding installation
The installation of products that will permanently be part of the electrical installation and which include dangerous voltages, should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.

CE marking
This product complies with all of the relevant European guidelines and regulations. For radio equipment Niko llc declares that the radio equipment in this manual conforms with the 2014/53/EU directive. The full text of the EU declaration of conformity is available at www.niko.eu under the product reference, if applicable.

Environment
This product and/or the batteries provided cannot be disposed of in non- recyclable waste. Take your discarded product to a recognised collection point. Just like producers and importers, you too play an important role in the promotion of sorting, recycling and reuse of discarded electrical and electronic equipment. To finance the rubbish collection and waste treatment, the government levies recycling charges in certain cases (included in the price of this product).

Support & contact

nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
support@niko.eu

Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up-to-date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals