Marathon Lighting ML-WM-5563 LED Wall Mount Instructions

June 1, 2024
Marathon Lighting

Marathon Lighting ML-WM-5563 LED Wall Mount

BEFORE YOU BEGIN

Read and follow all safety instructions

WARNING
RISK OF FIRE, EXPLOSION AND ELECTRIC SHOCK

  • This product should be installed, inspected, and maintained by a qualified electrician only, by the NEC (National Electric Code) and all local codes.
  • Turn off electrical power before inspection, installation or removal.
  • Use only UL (or other NTRL) approved wire for input/output connections.
  • Minimum size 18 AWG or 14 AWG for continuous runs.
  • Make sure LEDs and drivers are cool to touch when performing maintenance.
  • Make sure the supply voltage is the same as the rated voltage of the luminaire.
  • Do not install in a hazardous atmosphere, except where the ambient temperature does not exceed the rated operating temperature of the fixture.
  • Keep tightly closed when in operation

Prepare Electrical Wiring

Electrical Requirements

  • The LED driver must be supplied with 120 or 277V, 50/60 Hz and connected to an individual, properly grounded branch circuit protected by a 20-ampere circuit breaker. Use min. 75°C supply.

Grounding Instructions

  • The grounding and bonding of the overall system shall be done per NEC Article 600 and local codes

Installation Guide

Tools Required: #2 Phillips Screw Driver Wire Strippers Wire Cutters Small adjustable wrench or 5/16″ socket wrench

Before starting:

  • Ensure that the supply power is shut off.
  • Unpack the fixture and ensure that there are no damaged or missing parts.

Installation Steps:

  1. Locate the three screws on the front of the fixture cover and loosen them to remove the cover
  2. Locate the two hex nuts above the LED board and remove them to separate the fixture back plate and rear mounting bracket
  3. Secure the mounting bracket to the junction box
  4. Wire the fixture leads to the supply leads per Figure 1 below
  5. Reattach the fixture back plate to the mounting bracket
  6. Replace the fixture cover. Tighten screws securely

Standard Wiring Diagram

Marathon-Lighting-ML-WM-5563-LED-Wall-Mount-fig-5

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Marathon Lighting User Manuals

Related Manuals