Marathon Lighting ML-BL-1993A LED Panel Lights Installation Guide

Marathon Lighting ML-BL-1993A LED Panel Lights

Specifications

• Product: LED Lighting Fixture
• Model Number: N/A
• Power Source: Electric
• Wattage: Varies based on model
• Dimensions: Varies based on model
• Color Temperature: Varies based on model

Product Usage Instructions

1. Safety Precautions:
   Before installing or using the LED lighting fixture, make sure to read and follow all safety instructions provided in the manual.

2. Electrical Wiring:
   Ensure that the electrical wiring in your installation area meets the electrical requirements specified for the LED lighting fixture.

3. Grounding Instructions:
   Follow the grounding instructions provided in the manual to ensure proper installation and safety. The grounding and bonding of the overall system should be done in accordance with NEC Article 600 and local electrical codes.

Installation Steps

1. Prepare the installation area by turning off the power source.
2. Mount the LED lighting fixture securely using appropriate mounting hardware.
3. Connect the electrical wiring following the wiring diagram provided in the manual.
4. Secure all connections and ensure they are properly insulated.
5. Turn on the power and test the LED lighting fixture to ensure proper functionality.

FAQ

• Q: What should I do if the LED lighting fixture is not working after installation?
  A: If the LED lighting fixture is not working after installation, check the power source, connections, and ensure that the fixture is securely mounted. If issues persist, contact customer support for assistance.

• Q: Can I install the LED lighting fixture outdoors?
  A: The suitability of installing the LED lighting fixture outdoors depends on the specific model. Refer to the product specifications or contact customer support for guidance on outdoor installations.

LED Lighting Fixture

SAVE THESE INSTRUCTIONS

BEFORE YOU BEGIN
Read and follow all safety instructions

WARNING
RISK OF FIRE, EXPLOSION AND ELECTRIC SHO CK

• This product should be installed, inspected, and maintained by a qualified electrician only , in accordance with the NEC (National Electric Code) and all local code s.
• Turn off electrical power before inspection, installation or removal.
• Use only UL (or other NTRL) approved wire for input/output connections.
• Minimum size 18 AWG or 14 AWG for continuous runs.
• Make sure LEDs and drivers are cool to touch when performing maintenance.
• Make sure the supply voltage is the same as the rated voltage of the luminaire.
• Do not install in a hazardous atmosphere, except where the ambient temperature does not exceed the rated operating temperature of the fixture.
• Keep tightly closed when in operation

Prepare Electrical Wiring

Electrical Requirements
The LED driver must be supplied with 120 to 277V, 50/60 Hz and connected to an individual, properly grounded branch circuit protected by a 20 Ampere circuit breaker. Use min. 75°C supply.

Grounding Instructions
The grounding and bonding of the overall system shall be done in accordance with NEC Article 600 and local codes

LED PANEL LIGHTS

• Connect the green ground wire from the fixture to the supply ground wire.
• Connect the white wire from the fixture to the supply white wire (neutral wire).
• Connect the black wire from the fixture to the supply black wire (live wire).
• Connect the purple wire from the fixture to the purple (DIM+) supply wire.
• Connect the pink wire from the fixture to the pink (DIM-) supply wire.
• Secure the five connections using five wire nuts (AA).
• Wrap the five wire connections with electrical tape for a more secure connection.

FOR SELECTABLE PANELS

Select CCT and Wattage

• CCT adjustment 3500/4000/5000K CCT (pre-set to 4000K). Wattage adjustment wattage).

Mounting Options

• Recessed
• Surface (requires Mounting Kit)
• Pendant/Suspension (requires Mounting Kit)

ph: 1-888-390-6406

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>