Marathon Lighting ML-EM-Combo-2R-WH Emergency Lighting

Product Information

Specifications

• Model: Marathon Lighting Exit Light
• Color: White
• LED Colors: Red and Green
• Contact: T: 214-702-2818
• Website: www.marathon-lighting.com

Product Usage Instructions

Installation

1. For wall mounting, refer to steps 4-8 in the manual for side or ceiling mounting.
2. Connect the exit light to a single power source to illuminate all lamps simultaneously.

Switching LED Colors

1. The initial packing includes a Red LED Exit light.
2. If you need to switch to Green LED Exit light:
   • Place the DIP switch at ‘R’ for red letter illumination.
   • Place the DIP switch at ‘G’ for green letter illumination.

Frequently Asked Questions (FAQ)

• Q: How do I mount the exit light on the wall?
  A: Refer to steps 4-8 in the manual for detailed instructions on side or ceiling mounting.

• Q: How do I switch between Red and Green LED illumination?
  A: Use the DIP switch on the exit light. Place it at ‘R’ for red letter illumination and ‘G’ for green letter illumination.

• Q: Can I connect the exit light to multiple power sources?
  A: No, connect the exit light to a single power source to ensure all lamps are simultaneously illuminated.

INSTALLATION INSTRUCTIONS FOR EMERGENCY LIGHTING

Package Contents

INCLUDED

Part| Description| Quantity
1| Emergence Lighting| 1
2| Hardware Kit| 1

Warnings and Cautions
IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1. Review the diagrams thoroughly before beginning.
2. All electrical connections must be in accordance with local codes, ordinances and the National Electric code.
3.  Disconnect power at fuse or circuit breaker before installing or servicing.
4. Do not use outdoors.
5.  Do not mount in hazardous locations, or near gas or electric heaters.
6. Do not let power cords touch hot surface.
7. Equipment should be mounted in locations and at heights where it will not be subjected to tampering by unauthorized personnel.
8. The use of accessory equipment not recommend by the manufacturer may cause an unsafe condition.
9. Do not use this equipment for other than intended use.
10. All servicing should be performed by qualified personnel only.
11.  Allow battery to charge for 24 hours before first use .
12. For connection to a single source of supply such that all lamps are simultaneously illuminated.

NOTE: First turn off electricity

Wall Mounting

1. Remove mounting plate from fixture

2. Knockout in back of mounting plate and push wires through the hole.

3. Securely attach mounting plate to J-box (not included)

4. ELECTRICAL CONNECTIONS
   Make the proper supply wire connections. If using 120VAC, connect the black and white wires to the building utility. If using 277V AC, connect the orange and white
   wires to the building utility

5. Connect the battery to connector on the PCBA

6. Snap fixture onto mounting plate and ensure no wires are pinched. Make sure unit is fully attached.

7. Restore power and press test button. Battery powered LED will come on, AC light will turn off.

Side or Ceiling Mounting

1. Open to cover and knockout on the top of the fixture.
2. Secure the mounting plate tp tube with nut.
3. Push the open cover and knockout on the top of fixture
4. Reference step 4-8 in side or ceiling mounting.

Notice: Red and Green Exit Light switchable

1. Initial packing is Red LED Exit
2. Switch to Green LED Exit if necessary

• Place DIP switch at R for red letter
• Place DIP switch at G for green letter

www.marathon-lighting.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>