VEDINDUST HD808 HDMI Audio Extractor User Manual
- June 14, 2024
- VEDINDUST
Table of Contents
VEDINDUST HD808 HDMI Audio Extractor
Safety and Notice
Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Follow all instructions and warnings marked on this unit.
- Do not attempt to service this unit yourself, except where explained in this manual.
- Provide proper ventilation and air circulation and do not use near water.
- Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
- Use only the power adapter and power cords and connection cables designed for this unit.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Features
- Support 1 HDMI input, 1 HDMI output
- Audio De-embedding: Audio of the connected HDMI input is output at the digital Optical, Coaxial and analog 3.5mm UR stereo connectors
- Support maximum resolutions up 4Kx2K@60HZ YUV4:2:0
- Supports multi-channel Dolby® and DTS™ surround formats up to 5.1
- Support 3D video format
- EDID Management: Internal library with 8 internal EDID handshakes for customer requirements
- Low power consumption can work without additional power supply to the device
Specifications
- HDMI resolution 4k2k@30Hz/3D /1080p/1080i/720p/576p/576i/480p/480i
- Support video color format 24bit/deep color 30bit,36bit
- Support audio form! LPCM 2CH,DTS5.1,DD5.1
- Max bandwidth 340MHz
- Max baud rate 10.2Gbps
- Input/Output TMDS signa l 0.5-1.5Volts p-p(TTL)
- Input/Output DDC signal 5Volts p-p (TTL)
- Input cable distance S10m AWG26 HDMI standard cable
- Output cable distance S1 Om AWG26 HDMI standard cable
- Maximum power consumption 1W
- Power adapter DC-5V
- Operating Temperature range (-5 to +45 C)
- Operating Humidity range 5 to 90%RH (No Condensation)
- Storage Temperature -20’C – 60’C I -4″F – 140’F
- Dimension (L x W x HJ L90W60H21 (mm)
- Net Weight 125g
Package List
- HDMI Audio Extractor Converter 1 PC
- User manual 1 PC
- Micro USB power cable 1 PC
Panel Description
- USB 5V: Micro USB type B jack, Red LED illuminates solid to indicate A.when the unit is connected to the power supply.
- IN: Connect to HDMI source equipment such as media players, game consoles or set-top boxes.Blue LED illuminates solid to indicate an active HDMI signal is incoming.
- HDMI OUT : HDMI Output port.
- EDID : EDID Emulation
- AUX : 3.5mm audio output.
- UR: RCA jack.
- Coaxial : S/PDIF audio output with de-embedded audio from HDMI source.
- Optical : S/PDIF audio output with de-embedded audio from HDMI source.
Table-1
Switch
Position
| Native
Resolution
| AUX& L/R
Output
| Optical&Coaxial Output|
HDMI Audio
---|---|---|---|---
ABC
1· ··1
o
|
Copy EDID from HDMI Output, Fixed 2CH Audio
|
2CH PCM
|
2CH PCM
|
2CH PCM
ABC
□1
|
Copy EDID from HDMI Output.Fixed 5.1CH Audio
|
MUTE
|
DOLBY DTS5.1
|
DOLBY DTS 5.1
L AB : C J o
1
|
Copy EDID from HDMI Output.Fixed 2CH Audio
|
2CH PCM
|
2CH PCM
|
MUTE
rA B3C
□1
|
Copy EDID from HDMI Output.Fixed 5.1CH Audio
|
MUTE
|
DOLBY DTS5.1
|
MUTE
LA B Clo
1
|
4 K/30Hz
2CH AUDIO
|
2CH PCM
|
2CH PCM
|
MUTE
ABC
□1
|
4K/30Hz DOLBY/DTS 5.1
|
MUTE
|
DOLBY DTS 5.1
|
MUTE
ABC
Ej□1
|
1080p
2CH AUDIO
|
2CH PCM
|
2CH PCM
|
MUTE
ABC
]··· [
|
1080p DOLBY/DTS 5 1
|
MUTE
|
DOLBY DTS5.1
|
MUTE
Wiring Diagram
How to Use
- Connect the HDMI source with the HDMI input port over the HDMI cable.
- Connect the converter hdmi output port with the display over the HDMI cable.
- Connect the corresponding audio cable to the speaker device.
- Plug the included power cable into the USB jack, then plug into a reliable power source.
- Power on all connected devices.
- The audio converter is ready for use.
Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common troubles shooting way shows below:
| No. | Trouble Description | Causes and solutions |
|---|---|---|
| **** |
No sound of AUX&L/R output
| ****
1.Check that the switch is set to the correct position 2.Set the audio format of the source output to PCM
2
| ****
Non-Power
-Connected
| ****
1. Check that the power indicator is lit
2. Pleasetry to connect to an external 5V DC power supply.
3. Check if the power adaptor head is truly and correctly inserted the power socket.