Nzs SV-1081X Smart Pass Management Module User Manual

June 5, 2024
Nzs

Nzs
SV-1081X Smart Pass Management Module
User Manual
Nzs SV 1081X Smart Pass Management Module -

SN

SV-1081X
SV-1083X| SV-1082X, SV-1084X
SV-1085X, SV-1086X
---|---

It can be used with access gates and attendance for communities, office buildings, schools, hotels, scenic spots, transportation hubs, and other public service places.

Parameters

Camera Resolution 2 million pixels
Type Binocular wide dynamic camera
Aperture F2.4
Focusing distance 50-150cm
White balance auto
Photoflood light LED and IR dual photo flood light
Screen Size 8.0-inch IPS LCD screen
Resolution 800×1280
Touch Not supported (optional support)
Processor CPU RK3288 quad-core (optional RK3399 six-core, MSM8953 eight-

core)
Storage| EMMC 8G
Interface| Network module| Ethernet and wireless (WIFI), NFC
Audio| 1.5W / 4R speakers
USB| 1 USB OTG, 1 USB HOST standard A port
Serial communication| 1 RS232 serial port
Relay output| 1 door open signal output
Wiegand| One Wiegand 26/34 output, one Wiegand 26/34 input
Upgrade button| Support Uboot upgrade button
Wired network| 1 RJ45 Ethernet socket
Function| Credit card reader| None (optional IC card reader, ID card, ID card)
Face library| Up to 20,000
1: N face recognition| Support
1: 1 face comparison| Support
Stranger detection| Support
Identify distance configuration| Support
UI interface configuration| Support
Upgrade remotely| Support
Interface| Interfaces include device management, personnel/ photo management, record query, etc.
Deployment method| Support public cloud deployment, privatized deployment, LAN use, stand-alone use
Infrared thermal imaging module| Temperature detection| Support
Temperature detection distance| 1 meter (optimal distance 0.5 meter)
Temperature measurement accuracy| ≤ ±0.5℃
Temperature measurement range| 10℃~42℃
Visitors’ temperature is normal and released directly| Support
Abnormal tem-temperature alarm| Support (temperature alarm value can be set)
General parameters| Power| DC12V(±10%)
Operating temperature| 0℃~40℃
Storage temperature| -20℃~60℃
Power consumption| 13.5W(Max)
Installation method| Gate bracket installation
Size| Standard:274.2412821.48(mm)
IC card / ID card:296.18132.8825(mm)
Packing list| Machine 1, power adapter 1, manual 1, certificate of conformity 1

Installation Notes

  1. Module structure descriptionNzs SV 1081X Smart Pass Management Module - ModulestructuredescriptionOptional credit card (ID) version, size: 296.18132.8825(mm)
  2. Port descriptionNzs SV 1081X Smart Pass Management Module - Port description
  3. Installation method (installed with SV-1081X)
    ① According to the requirements of the installation site, open a 35mm diameter hole (as shown in the figure below) in the space position of the gate (usually the middle or front side). Note: The position of the opening should be based on the actual gate type and scene, and 35mm is for reference only.
    ② Unscrew the nut at the bottom of the gate head post, thread the cable out of the nut, and remove the nut.Nzs SV 1081X Smart Pass Management Module - head
post ③ Under the gate, insert the cable and cable interface into the gasket and nut, in turn, tighten the nut, connect the power supply, and the screen will start.

Nzs SV 1081X Smart Pass Management Module - insert the
cable

Note: The brackets in the figure above are for installation reference only, non-standard accessories.

FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Care and Maintenance

  1. During the installation and use of the product, all electrical safety regulations must be strictly observed.
  2. When installing on the gate, please make sure that the product is installed firmly.
  3. If the product does not work properly, please contact the after-sales service personnel. Do not disassemble or modify the product in any way. (The company does not assume any responsibility for problems caused by unauthorized modification or repair.
  4. Please understand that you are responsible for properly configuring all passwords and other related product security settings, and keeping your username and password properly.
  5. If the equipment does not work properly, please do not disassemble it for repair, otherwise, it will affect the equipment warranty.
  6. Avoid extreme or extreme environments such as extremely high temperature (or low temperature), high humidity, vibration, radiation, and chemical corrosion during installation and use.

Notes

  1. This product is not suitable for use in direct sunlight.

  2. This product is not suitable for outdoor or semi-outdoor use.

  3. The best use environment of this product is indoor, with no wind at 25℃ and a temperature measurement distance of 50CM.

  4. When the ambient temperature is lower than 15℃ or higher than 30℃, the temperature measurement error will increase.

  5. The measured person should have no strong light source directly on the forehead and face, and no other high/low heat source interference.

  6. When the measured person comes from outdoors or from a place with a big difference from the measured ambient temperature, the measured person should stay in the measured environment for at least 5~10 minutes, and then measure the temperature after it is consistent with the ambient temperature. Otherwise, the accuracy of the measured result will be affected.

  7. The measured person should keep the forehead dry and not be covered by hair, dust, hats, etc.

  8. Temperature measuring equipment can not be placed at the tuyere, because the cold and hot wind has an impact on the accuracy of temperature measuring equipment.

  9. Do not place this product near or on high-temperature objects.

  10. The data measured by the infrared thermal imaging body temperature testing equipment is only used for preliminary screening and cannot be used as medical diagnostic data. Once high body temperature is detected, further screening is required.

  11. Calibration method: Please follow the following steps before using this product for tempera- ture screening:
    a.Measure your own forehead temperature with the traditional calibrated high- precision forehead thermometer in the suitable environment for the use of this product, and assume 36.3 ℃ is obtained.
    b.Use this product to measure your own temperature in the suitable environment for the use of this product, and assume that the temperature is 36.0℃.
    c.Repeat steps 1 and step 2 more than three times to calculate the difference value between the average value measured by the forehead thermometer and the average value measured by this product. If the error range is within 0.3℃, then this product can be used normally. If the difference value is too large, such as 1℃, then you need to long-press the middle mouse button.
    After the dialog box pops up, enter 123456 to enter the application settings and set compensation settings in the “Temperature Detection Settings”.

  12. If you need to upgrade the machine, the power can not be cut off during the upgrade process. The power cut will cause the upgrade to fail, resulting in the failure to upgrade again, which needs to be disassembled.

  13. Note: This product is not a medical professional device!

Warranty Card
Dear customer, thank you for purchasing the Face Recognition Pass Management Module. In order to better serve you, please read, fill in and properly keep the warranty card after purchasing the product.

Your name|
---|---
Contact person|
Telephone|
Address|
Date of purchase|
Serial number|
Maintenance records|
Cause of issue|

Warranty Description:

  1. This warranty card is required to be properly kept by the user as proof of repair.

  2. This product is guaranteed for one year from the date of purchase.

  3.  Warranty Equipment During the warranty period, under normal use and maintenance conditions, the machine itself malfunctions. Upon inspection, the company will provide free repair and parts replacement.

  4. During the warranty period, if the following events occur, the company has the right to refuse service or charge materials and maintenance service fees as appropriate.
    a. This warranty card and valid proof of purchase cannot be provided.
    b. Product failure and damage caused by improper user use.
    c. Damage due to abnormal external forces.
    d. It is not our maintenance service, and the user dismantles it to cause damage.
    e. Failures and damage caused by natural disasters or other force majeure factors.
    f. Others intentionally damaged.

  5. The company reserves the right to modify and interpret all content.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals