STRONG SRT 32HC4043 LED TV User Manual

: June 4, 2024
: STRONG

Table of Contents

STRONG SRT 32HC4043 LED TV
Licenses
INSTRUCTION
Equipment set-up
INSTALLATION
Installing the batteries
ELECTRONIC PROGRAMME GUIDE (EPG)
Channel extra settings
USB
TROUBLESHOOTING
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STRONG SRT 32HC4043 LED TV

STRONG-SRT 32HC4043-LED-TV-
product

Licenses

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.

THIS PRODUCT IS SOLD WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT. THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT. YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE. SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, STRONG declares that the radio equipment SRT 32HC4043 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/docSubject to alterations.

In consequence of continuous research and development technical specifications, design and appearance of products may change. Manufactured under license from Dolby Laboratories. Dolby Audio and the double-D symbol are registered trademarks of Dolby Laboratories. The terms HDMI and HDMI High- Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and other countries. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Netflix is a registered trademark of Netflix, Inc. YouTubeTM is a trademark of Google Inc. All product names are trademarks or registered trademarks of their respective owners.

INSTRUCTION

Safety Instructions
Read all of the instructions before operating the set. Keep these instructions well for later use.

Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
The mark indicates a risk of electric shock. The external wires must be installed by an instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one’s hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. In case of damages, please get the power cord replaced by a similar one with the same specifications. The absence of a light indication on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
A USB terminal can provide a maximum of 500 mA.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Operating Environment

Do not install this equipment in a confined space such as a bookcase or similar unit.
Do not use the set near damp, and cold areas, protect the set from overheating.
Keep away from direct sunlight.
Do not use the set near dust place.
Do not attach candle to accessible opening area, to avoid flammable foreign material from entering the TV.

WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all the parts are included and keep the packaging away from children. We recommend that you keep the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty.

Accessories

1x installation instructions
1x safety instructions/warranty cards
1x remote control
2x AAA batteries

Equipment set-up

Fig. 1a
Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
Stand assembly instruction

Carefully place the TV with its front side facing down on a cushioned flat surface in order to protect the TV and the TV screen from damage.
Take out the 2x stand feet and assemble them to the TV.
Fasten the feet to the bottom of the TV using the 4x ST4*20mm (32’’) screws.Fig. 1c This user manual provides complete instructions for installing and using this TV. The symbols serve as follows.
- Indicates warning information.
- Indicates any other additional important or helpful information.
- Represents a button on the remote control or the TV. (Bold characters)
- Represents a menu item within a window. (Italic characters)

INSTALLATION

Power indicator /remote sensor
Speakers
Buttons: Input source, Menu, V-/V+, CH-/CH+, Standby/ON.
. Power switch ON/OFF

Side panel

NOTE:
The graphics are for representation only.

Connect a Conditional Access Module (CAM).
Speakers will be muted when earphone is plugged in and headphone selected.
3.5 mm female jack entry for composite video and left/right audio connection.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement
audio connections and for a full Dolby audio support. Connect a satellite dish to the TV for searching programmes.
Connect a terrestrial antenna or cable connection from your provider to the TV for searching programmes.

Remote control

Press to turn the TV on or standby.
Press to mute or restore the volume.
Choose channel directly.
Select desired power saving mode.
Press to display the current EPG information in DTV mode.
Adjust the volume up or down.
Press to open extra options.
Change programmes up or down. Big steps in Channel list.
Display information about the current source.
Select the input source mode.
Step back in some menu options
Open the menu options. Step back in some menu options.
Exit the current menu.
Navigate the menu.
Confirm the selection.
Press to enter or exit the teletext menu.
Enable/disable subtitles in DTV/USB mode.
Press to enter into the channel list.
Press to view your assigned favourite list or main list channels. Press pq to cycle through your assigned favourite channels, press OK to confirm. To open the selected list directly, you can press the LIST button.

Installing the batteries

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the polarity markings inside the compartment.

Slide the cover horizontally.
Put 2x AAA batteries in the compartment and make sure the polarity is correct.
Precautions for using the battery

Improper using of the battery will cause leakage. Carefully follow these instructions. Slide horizontally to close the cover.

Please note the batteries’ polarity to avoid short circuit.
When the battery’s voltage is insufficient which affect the use range, you should replace it with a new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
Do not put the battery into fire, and charge or decompose the battery.
Please dispose batteries abide by relevant environmental protection regulation.

Using the remote control

Use the remote control by pointing it towards the remote sensor. Items between the remote control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.

FIRST TIME INSTALLATION
After all connections have been properly made, switch on your TV. The language selection will appear on screen. Use pq t u to select the OSD Language of your preference. Confirm with OK on your remote control.The next screen appears with the Mode Selection to select Home Mode or Shop Mode. Press OK and t u to confirm. Then the next screen appears with the tuner selection. Choose the one you like to use.

ELECTRONIC PROGRAMME GUIDE (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers information on broadcasted programmes. You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use pq to select a programme. Press EXIT to stop and return to viewing modes. Then press the COLOUR BUTTONS for entering the required settings.

MENU SETTINGS
Below items depend if they are available of select input source. Use INPUT to select another source.

Menu control (DTV mode)
Press MENU to enter the main menu. Press t u to select an item. Press pq and OK to select the submenus. Press MENU to exit the item.

Picture menu

Select the automatic picture control mode. Available choices are Dynamic, Standard, Mild and User.
Select the overall colour tone of the picture. Available choices are Cool, Medium, Warm and User.
Select the aspect ratio (display proportions) according to your video signal type or preference. Available choices are Auto, 4:3,16:9, Zoom1 and Zoom2. Note: Some options may not be available under some sources. Turn on the Audio description, you can activate the setting of AD volume. When turn on the audio description, a narrator will describe what is happening on the screen for blind or visually impaired viewers. (Only if available in DTV mode.)
If you have connected S/PDIF output to digital home audio system. You can select “Auto” to output Dolby audio automatically. If channel have this audio channel.

Channel
Press MENU to display the main menu. Press t u to select Channel in the main menu. Press pq to select the option you wish to adjust in the Channel menu. Press OK to adjust. After finish your adjustment, press OK to save and return to the previous menu. Below items depend if they are available of select input source. Use INPUT to select another source.

Auto Tuning
Press pq to select Auto Tuning, select the Scan Type and proceed with OK.

Dish Setup
If you use DVB-S/S2 as input source, the Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning or Manual Tuning by selecting with EPG button the wanted transponder.

DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press pq to select DTV Manual Tuning. Then press OK to enter the sub-menu.
Press t u to select a Channel No., and then press OK to start the search. The search stops when a programme is found and this programme will be stored in the current channel position. If you want to stop the search, press MENU.

ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the Channel menu, select ATV Manual Tuning and press OK to access. Highlight and press pq to select Storage To 1 (maybe other number), Sound System and Channel No.. Then select search and press OK to start the search. Press u for the unit to search towards higher frequency. Press t for the unit to search towards lower frequency. The search stops when a programme is found and this programme will be stored in the current channel position. If you want to stop the search, press MENU.

Channel extra settings

Edit the programmes. You can press the COLOUR BUTTONS on the remote control to skip programmes, rename and delete programmes or move programmes, and add programmes to the favourite list by pressing FAV.
Showing the information of current DTV channel. Only available with DTV signal.
Enables the user to watch and change settings of CAM modules and check values from inserted smart card.
Select which channel list you like to see if you press on LIST button. Select between Main List or Favorite List
Press pq in the Channel. Select Schedule List, then press OK to enter the sub-menu. Use the COLOUR BUTTONS to modify your settings.
Press OK and use t u to select Yes if you want to update the software or No to go back to the main menu. For more information see also chapter 6.2.5.
The time is automatically obtained from the channel transmission and doesn’t have to be set manually. Should this function not be provided by the broadcaster, it is possible to set it by pressing OK and set date and time by
pressing pq t u.
Press p q t u to select Time Zone.
Press p q to select Sleep Timer. Available Options: Off, 10 min., 20 min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min..
This function allows you to set the automatic shutdown of your TV. Choose between 2H, 3H, 4H or Off to disable this function.
This function allows you to choose how long the info banner is displayed. Choose between 5s, 15s or 30s.
This option allows you to enable or disable the password protection. Press OK to set this function On or Off.
The default password is 0000, to customize the password press OK and follow the instruction within the menu.
This option allows you to prevent viewing of one or more channels. Press OK to display the channel list and select with pq the channel you want to be locked. Press GREEN to lock it. Consider the same procedure to lock other channels if needed.
Press OK to enter and set the age for suitable programmes for children, then press pq.
Select the Menu language of your choice. The default setting is English. Press pq to select the menu language.
Press t u to select Primary for main audio track or Secondary next audio channel if first is not available. Press pq t u to select your chosen Audio Language, then press OK.
Press pq t u to select your chosen Subtitle Language, then press OK
This item shows the region you been selected by first time you install the TV.
Press pq to select this function, by pressing OK and enter the PIN code. You will reset all the settings contained in the main menu and deleted all installed channels. TV will go back to First Time Installation See chapter 3.
Your current software version is displayed. See chapter 5.7.1.
Switch between Home modes and Shop modes with default more brightness and Auto standby to off.
This option allows you to copy you channel list to USB device as back up. Insert USB device and select Back up. To load this later back into TV, select “Restore”.
Press t u to turn the HDMI CEC On or Off.
Press t u to turn the Audio Receiver On or Off.
Press t u to turn on this feature. When finished turn off your TV. The connected device will turn off automatically.
Press t u to select this option. When finished, turn on the connected device. The TV will switch on automatically.
Press OK to open the main menu of device.
Access the device menu.

USB

Reminder when using the USB player
Some USB storage devices may not be compatible to operate smoothly with this TV.Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer’s responsibility. For large file sizes, the loading speed may be slightly longer. The recognition speed of a USB storage device may depend on each device.

When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB storage device or the files stored in it may be damaged. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB Hard Disk and restart the TV system.

An “Unsupported File” message will be displayed if the file format is unsupported or the file is corrupted. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.This TV may not support some multimedia files changed and upgraded as the change of the encoding format or other technical aspects advance.Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.

USB menu
Press SOURCE and select USB. You can view movie, music and photo files from your USB storage devices. Connect a USB storage device to the USB input terminal and select the types of media on the home page: Movie, Music, Photo and text. Press OK, the screen will show the connected USB device, press OK again to view the file folders and files. Press pq or t u to select a folder, press OK to open the folder and select the files. Highlight the one you want to play or watch or press directly u 2 to start playing directly. Press 3 to stop playing and return to upper lever folder. Continuously press RETURN to go back to upper level folder. Repeat again to select and play another media type.

Browse photos
Press during viewing INFO or OK to display/exit from the menu bar (Fig.8). Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Previous/Next

Press u 2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to show the previous or the next picture. Press t u to highlight the icon on the control bar, and then press OK. The TV will response accordingly.
Highlight the icon and press OK. You can select 3 different modes: None to disable the function, 1 to repeat one track only and All to repeat the entire list once it is finished.
Highlight the button and press OK to check the information of the shown photo.
Highlight the icon in the menu bar and press OK to rotate the picture 90 degrees clockwise or counter clockwise.
Highlight the icon on the menu bar and press OK to zoom in or zoom out of the image.
When the image is magnified, use this function for convenient check. Highlight this icon, press OK, then press t u pq to move the image.

Browse text documents
Press t u to select Text in the main menu. Then press t u to select the drive disk you choose to watch and OK to enter. Select the file you want to display by using pq t u and confirm with OK. Quit step by pressing OK. Press t u to select return and go back to previous menu.

Software update via USB
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong.tv. Search the model number on our website’s service support section. If there is an improved software version you can download the file and copy it to the root of a USB device. Then press pq button to select Software Update (USB) from the SETUP menuon your TV. Afterwards plug your USB device into the USB slot and press OK to update the respective software. Confirm with Yes using t u. When the update is completed, remove the USB stick, disconnect your device from the main power supply and plug in again.

TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail.

Problem	Possible cause and solution
No picture,no sound	1. Check if the fuse or circuit breaker is working.

2. Plug another electrical device into the outlet to make sure it is working or turned on.

3. The power plug is in bad contact with the outlet

4. Check the signal source.

No colour| 1. Change the colour system.

2. Adjust the saturation.

3. Try another channel. Black-white programme may be received.

The remote control does not work| 1. Change the batteries.

2. The batteries are not installed correctly.

3. Main power is not connected.

No picture, normal sound| 4. Adjust the brightness and contrast.

5. Broadcasting failure may happen.

Normal picture, no sound| 1. Press the volume up button to increase the volume.

2. The volume is set to mute, press ! to restore the sound.

3. Change the sound system.

4. Broadcasting failure may happen.

Unorderly ripples on the picture| It is usually caused by local interference, such as cars, daylight lamps and hair driers. Adjust the antenna to minimize the interference.
Snowy dots, blocking and interference| If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots, show blocking or break-ups. When the signal is extremely weak, it may be necessary to install a special antenna to improve the reception.

1. Adjust the position and orientation of the indoor/outdoor antenna.

2. Check the connection of the antenna.

3. Fine tune the channel.

4. Try another channel. Broadcasting failure may happen.

Radio frequency interference| This interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source.
Playback of video is causing picture freeze/ macro blocks or similar distortion, especially on HD content.| Read/write speed of your USB device could be too low. Make sure to use a USB storage device with sufficient speed and space. Pen drives (USB sticks) may not support sufficient speed.
Problem| Possible cause and solution
---|---
No signal or weak signal, intermittent reception.| a) Cables might have loosened; moisture might have entered into cables or connectors, heavy rain at present or heavy storm at present.

Check the cable connections, LNB and other equipment connected between the LNB and the receiver, or peak the dish. Wait for rain/storm to subside. Ask a local satellite specialist for advice.

b) The satellite dish is not pointing at the (correct) satellite(s). Adjust the dish. Ask a local satellite specialist for advice.

c) Satellite dish is too small, trees or buildings in path. Change to a larger dish or change position of dish.

d) Signal is too strong, dish is oversized.

Connect a signal attenuator to the LNB input. Ask a local satellite

specialist for advice.

Bad picture/blocking error during heavy rain.| Heavy rain will attenuate satellite signals, below a certain level blocking will occur.

Make sure your dish installation is up to standards to minimize rain effects. When in doubt, ask a local satellite specialist for advice.