Marathon Lighting 4XXX 50W LED Floodlight Installation Guide
- June 15, 2024
- Marathon Lighting
Table of Contents
Marathon Lighting 4XXX 50W LED Floodlight Installation Guide
SAVE THESE INSTRUCTIONS
BEFORE YOU BEGIN
Read and follow all safety instructions
WARNING
RISK OF FIRE, EXPLOSION AND ELECTRIC SHOCK
- This product should be installed, inspected, and maintained by a qualified electrician only, in accordance with the NEC (National Electric Code) and all local codes.
- Turn off electrical power before inspection, installation or removal.
- Use only UL (or other NTRL) approved wire for input/output connections.
- Minimum size 18 AWG or 14 AWG for continuous runs.
- Make sure LEDs and drivers are cool to touch when performing maintenance.
- Make sure the supply voltage is the same as the rated voltage of the luminaire.
- Do not install in a hazardous atmosphere, except where the ambient temperature does not exceed the rated operating temperature of the fixture.
- Keep tightly closed when in operation
Prepare Electrical Wiring
LED Flood Light
Tools Required:
Crescent Wrench
Wire Strippers
Wire Cutters
- Before starting ensure that the power is disconnected.
- Unpack fixture and ensure that there are no damaged parts.
- If using Knuckle Mount:
- Attach fixture to outdoor box cover, routing the fixture wires into the junction box. Connect fixture cables as seen below. Black to Black, White to White, and Green to Green.
- Aim fixture by loosening bolt on the arm, and repositioning to the desired angle. Tighten the bolt. If using U-Bracket:
- Secure fixture to flat mounting surface using 2 bolts.
- Aim fixture by loosening the 2 bolts on the U-Bracket to the desired angle. Tighten down both bolts.
- Wire end of cord to power supply as seen below.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>