AViANCE HD62498 3 Light Brushed Nickel Vanity Light Instruction Manual

AViANCE HD62498 3 Light Brushed Nickel Vanity Light

Product Information

Specifications:

• Model: HD62498
• Brand: AVIANCE
• Power Source: Hardwired
• Color: White
• Material: Metal and Glass
• Dimensions: 12 inches x 8 inches x 6 inches
• Weight: 3 lbs

Product Usage Instructions

Assembling & Installation Instructions:
The installation instructions provided apply to this product model. Follow the steps below for proper assembly and installation:

1. Shut off the power at the circuit breaker box before starting any installation work.
2. Remove the old fixture and all hardware from the Junction Box.
3. Unpack the new fixture carefully and lay out all parts on a clear area to ensure nothing is missing.
4. Attach the mounting plate to the junction box using provided screws.

Connecting the Wires:
Follow these steps to connect the electrical wires properly:

1. Connect the Black wire from the fixture to the black house (hot) wire.
2. Connect the White wire from the fixture to the white (neutral) house wire.
3. Ensure all wire nuts are securely fastened and consider using electrical tape for added safety.
4. If your outlet box has ground wires, connect the fixture’s ground wire accordingly.
5. Tuck the wire connections neatly into the wall junction box for a clean finish.

Your installation is now complete. Restore power to the junction box and test the fixture to ensure proper functionality.

Thank you for choosing AVIANCE products!

FAQ:

• Q: What should I do if I encounter flickering lights after installation?
  A: Flickering lights may indicate loose connections. Double-check all wire connections and ensure they are securely fastened.

• Q: Can this fixture be used in damp locations, such as a bathroom?
  A: This fixture is recommended for dry indoor locations only. Avoid installing it in areas with high moisture levels.

• Q: How can I clean and maintain this fixture?
  A: To clean, simply dust with a soft dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the finish. For further assistance with parts or assembly, please contact our customer service at info@aviancelighting.net.

The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

MOUNTING THE FIXTURE

1. Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
3. Attach the mounting plate to the junction box using two junction box screws as show. The side of the mounting plate marked “GND” must face out. The junction box is not included.
4. Guide fixture wires through hole in center of mounting plate.
5. Follow wiring instructions carefully (see fig.2).
6. Place the lamp body(A) over the mounting plate, aligning the backplane holes with screw hole of the mounting plate on side, then lock it securely with mounting screws.
7. Place the glass(B)/collaring ring(C)/check ring(D) insert to the lamp holder, lock them securely with the socket wrench(E), then remove the socket wrench and save it.
8. Install the light bulbs(not included) in accordance with the fixture’s specifications.
   NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!

CONNECTING THE WIRES

1. Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.

Your installation is now complete. Return power to the junction box and test the fixture.

Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at: info@aviancelighting.net

©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING, INC.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>