AViANCE HD84087 Fixture 6.25 in. 1-Light Brushed Nickel Wall Instruction Manual
- June 1, 2024
- AVIANCE
Table of Contents
AViANCE HD84087 Fixture 6.25 in. 1-Light Brushed Nickel Wall
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.
- WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
- ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Thread the two mounting screws about 1/4” into the pre-drilled holes in the mounting plate, spaced about the same distance apart as the holes in the fixture back plate. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the mounting plate marked “GND” must face out. The junction box is not included.
- Guide fixture wires through the hole in the center of the mounting plate.
- Follow wiring instructions carefully. (see fig.2)
- Raise the lamp body (A) onto the mounting plate, aligning the mounting holes with mounting screws, then lock it securely with the ball nuts (D).
- Attach the shade(B) to the lamp holder, using the check ring(C) by turning it clockwise until tight.
- Install the light bulbs (Not included) according to the fixture’s specifications.
NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has ground wires (green or bare copper) connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction box and test the fixture.
Product Information
Specifications
- Model: HD84087
- Product Type: Light Fixture
- Power Source : Electrical
- Color : White
- Materials: Metal, Glass
Frequently Asked Questions (FAQ)
Q: I don’t have experience with electrical work. Is it safe for me to
install this fixture myself?
A: If you are not comfortable working with electrical fixtures, we
recommend seeking professional assistance to ensure safety during
installation.
Q: What should I do if the fixture is not working after installation?
A: Double-check all wire connections and ensure they are secure. If the
issue persists, contact customer service for further assistance.
Q: Can I use LED bulbs with this fixture?
A: Yes, you can use compatible LED bulbs with this fixture. Ensure that the
wattage and base type of the LED bulbs match the fixture’s specifications.
Thank you for choosing AVIANCE products. For additional support or inquiries,
please contact customer service at
[email protected].