AViANCE HD43626 Livex Lighting Edgemont 2 Light Brushed Nickel Bath Vanity Instruction Manual
- June 1, 2024
- AVIANCE
Table of Contents
AViANCE HD43626 Livex Lighting Edgemont 2 Light Brushed Nickel Bath
Vanity
The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.
WARNING!
SHUT THE POWER OFF AT THE FUSE OR CIRCUIT BREAKER.
ASSEMBLING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker and remove the old fixture, including the single bar.
- Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to lose any small parts necessary for installation.
- Thread the pipe screw part way into the centre hole of the single bar and secure it with a hex nut.
- Attach the single bar to the junction box using two box screws as shown. The side of the single bar marked “GND” must face out. The junction box is not included.
- Follow wiring instructions carefully (see fig.2).
- Place the lamp body(A) over the pipe screw then tighten it with the ball nut(B). Raise the glass shade (C) to the lamp holder, then lock it securely with a check ring (D).
- Install the light bulb(Not included) according to the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured.
- You may wrap the connections with electrical tape. If your outlet box has ground wire (green or bare copper) connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the single bar.
- Tuck the wire connections neatly into the wall junction box. Your installation is now complete. Return power to the junction box and test the fixture.
Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:
info@aviancelighting.net
Read User Manual Online (PDF format)
Loading......