AViANCE HD43541 14.25 Inch 2 Light Polished Chrome Timeless Light Instruction Manual
- June 1, 2024
- AVIANCE
Table of Contents
AViANCE HD43541 14.25 Inch 2 Light Polished Chrome Timeless Light
Specifications:
- Model: HD43541
- Power Source: Electric
- Fixture Type: Ceiling Light Fixture
- Material: Metal, Glass
- Color: Varies
- Bulb Requirement: Not included, follow fixture’s specifications
- Wattage Limit: Follow fixture’s specifications, do not exceed
Product Usage Instructions
Safety Precautions:
Before beginning the installation process, ensure to shut off the power at the
fuse or circuit breaker to prevent any electrical accidents.
Mounting the Fixture:
- Turn off the power at the circuit breaker box and remove the old fixture and hardware from the junction box.
- Unpack the new fixture and lay out all parts. Make sure not to lose any small parts needed for installation.
- Assemble the single bar by threading the pipe screw partway into the center hole and secure it with a hex nut.
- Attach the single bar to the junction box using two box screws, ensuring the side marked GND faces out.
- Connect the electrical wires as shown in Fig.2, ensuring all wire nuts are secured. Connect the ground wire accordingly.
- Raise the lamp body onto the junction box, aligning the pipe screw with the center hole in the lamp body and secure it with the ball nut.
- Attach the glass shade to the bottom of the lamp holder and lock it securely with the check ring.
- Install light bulbs according to the fixture’s specifications, ensuring not to exceed the specified wattage.
Final Steps:
Your installation is now complete. Restore power to the junction box and test
the fixture to ensure proper functionality.
FAQ:
Q: What should I do if I encounter difficulties during installation?
A: If you face any challenges during assembly or installation,please
contact customer service at [email protected] for assistance with parts
or assembly.
Q: Can I use bulbs of any wattage with this fixture?
A: No, it is important to follow the fixture’s specifications regarding
wattage and not exceed the specified limit to avoid damage or hazards.
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
HD43541
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ASSEMBLING & INSTALLATION INSTRUCTIONS
MOUNTING THE FIXTURE (Fig.1)
-
Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
-
Carefully unpack your new fixture and lay out all the parts on a clear area.
Take care not to lose any small parts necessary for installation. -
Thread the pipe screw part way into the center hole of the single bar and secure with hex nut.
-
Attach the single bar to the junction box using two box screws as shown.
The side of the single bar marked “GND” must face out . The junction box is not included. -
While holding the lamp body(A) towards the ceiling, connect the electrical wires as Shown in Fig.2, making sure that all wire nuts are secured. You may have to wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it.
Otherwise connect fixture’s ground wire directly to the Mounting strap with the green screw provided. After wires are connected, tuck them carefully inside the Junction Box. -
Raise lamp body (A) onto the junction box, aligning pipe screw on single bar with center hole in lamp body and lock it securely with the ball nut(D).
-
Attach the glass shade(B) to bottom of the lamp holder, then lock it securely with check ring(C) until snug.
-
Install the light bulbs(not included) in accordance with the fixture’s specifications.
NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
Your installation is now complete. Return power to the junction box and test the fixture.
Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service
at:[email protected]
©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.