AViANCE HD43374 15 Inch 2 Light Polished Brass Vanity Light Instruction Manual
- June 1, 2024
- AVIANCE
Table of Contents
AViANCE HD43374 15 Inch 2 Light Polished Brass Vanity Light
Product Specifications
- Model: HD43374
- Power Source: Requires electrical connection
- Bulb Type: Not included, compatible with specified maximum wattage
- Material: Metal, Glass
- Color: Varies
Product Usage Instructions
Assembling the Fixture:
- Turn off power at the circuit breaker box and remove old fixture and hardware from the Junction Box.
- Unpack the new fixture and lay out all parts in a clear area, ensuring not to lose any small parts.
- Attach the mounting plate to the junction box using provided screws, ensuring the side marked GND faces out.
- Thread fixture wires through the hole in the center of the mounting plate.
- Align and secure the lamp body onto the mounting plate with ball nuts.
- Attach the glass shade to the lamp holder and secure it with a check ring.
- Install light bulbs according to specifications, ensuring not to exceed maximum wattage rating.
Connecting the Wires:
- Connect fixture wires – Black to black house wire (hot), White to white house wire (neutral).
- If present, connect fixture’s ground wire to green or bare copper ground wire in outlet box.
- Neatly tuck wire connections into the wall junction box.
Your installation is now complete. Restore power and test the fixture.
FAQ:
Q: What should I do if I lose small parts during assembly?
A: Contact customer service at [email protected] for assistance
with replacement parts.
Q: Can I use light bulbs of any wattage with this fixture?
A: No, make sure not to exceed the maximum wattage rating specified for
the fixture to avoid damage.
Q: How do I know which wires to connect during installation?
A: Follow the color-coding – Black to black (hot), White to white
(neutral), and bare copper to ground if applicable.
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
HD43374
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ASSEMBLING & INSTALLATION INSTRUCTIONS
ASSEMBLING THE FIXTURE (Fig.1)
-
Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
-
Carefully unpack your new fixture and lay out all the parts on a clear area.
Take care not to lose any small parts necessary for installation. -
Thread the two mounting screws about 1/4” into the pre-drilled holes in the mounting plate, spaced about the same distance apart as the holes in the fixture back plate. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the mounting plate marked “GND” must face out. The junction box is not included.
-
Guide fixture wires through hole in center of mounting plate.
-
Follow wiring instructions carefully (see fig.2)
-
Place the lamp body (A) onto the mounting plate, aligning the holes with mounting screws, then lock it securely with the ball nuts(B).
-
Attach the glass shade (C) to the lamp holder, then lock it securely with check ring (D).
-
Install the light bulbs(Not included) in accordance with the fixture’s specifications.
NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction box and test the fixture.
Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:
[email protected]
©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.