AVIANCE HD30947 14.5 Inch 3 Light Polished Brass Industrial Semi Flush Mount Light Instruction Manual
- June 1, 2024
- AVIANCE
Table of Contents
AVIANCE HD30947 14.5 Inch 3 Light Polished Brass Industrial Semi Flush
Mount Light
Product Specifications
- Model: HD30947
- Power Source: Electric
- Material: Metal, Glass
- Color: Silver
- Dimensions: 10″ x 10″ x 12″
- Weight: 5 lbs
Product Usage Instructions
Mounting the Fixture:
- Ensure power is shut off at the circuit breaker box.
- Remove old fixture and hardware from the Junction Box.
- Unpack the new fixture and lay out all parts on a clear area.
- Thread the pipe screw into the center hole of the single bar and secure with hex nut.
- Attach the single bar to the junction box using two box screws.
- Connect electrical wires following Fig.2 instructions.
- Raise lamp body onto the junction box and lock it securely with the ball nut.
- Attach the glass shade to the bottom of the lamp holder and lock it with the check ring.
- Install light bulbs according to specifications. Do not exceed specified wattage.
Testing:
After installation is complete, return power to the junction box and test the
fixture to ensure proper functionality.
Customer Service:
If you need assistance with parts or assembly, please email customer service
at info@aviancelighting.net.
Frequently Asked Questions (FAQ):
Q: Can I use LED bulbs with this fixture?
A: Yes, you can use LED bulbs as long as they are compatible with the
fixture’s specifications and do not exceed the specified wattage.
Q: What should I do if my outlet does not have a ground wire?
A: In case your outlet lacks a ground wire, connect the fixture’s ground
wire directly to the mounting strap using the green screw provided.
Q: How do I clean the glass shade of the fixture?
A: To clean the glass shade, gently wipe it with a soft, damp cloth.
Avoid using harsh chemicals or abrasive materials that may damage the glass.
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
HD30947
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ASSEMBLING & INSTALLATION INSTRUCTIONS
MOUNTING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Thread the pipe screw part way into the center hole of the single bar and secure with hex nut.
- Attach the single bar to the junction box using two box screws as shown. The side of the single bar marked “GND” must face out . The junction box is not included.
- While holding the lamp body(A) towards the ceiling, connect the electrical wires as Shown in Fig.2, making sure that all wire nuts are secured. You may have to wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it. Otherwise connect fixture’s ground wire directly to the Mounting strap with the green screw provided. After wires are connected, tuck them carefully inside the Junction Box.
- Raise lamp body (A) onto the junction box, aligning pipe screw on single bar with center hole in lamp body and lock it securely with the ball nut(D).
- Attach the glass shade(B) to bottom of the lamp holder, then lock it securely with check ring(C) until snug.
- Install the light bulbs(not included) in accordance with the fixture’s specifications.
NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
Your installation is now complete. Return power to the junction box and test the fixture.
Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:
info@aviancelighting.net
©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>