AViANCE HD59931 17.5 in. 1 Light Polished Chrome LED ADA Vanity Light User Guide

June 2, 2024
AVIANCE

AViANCE HD59931 17.5 in. 1 Light Polished Chrome LED ADA Vanity Light

AViANCE HD59931 17.5 in. 1 Light Polished Chrome LED ADA Vanity
Light

  • WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
  • ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.

ASSEMBLING THE FIXTURE (Fig.1)

  1. Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
  2. Disconnect power at main electrical panel before installation.
  3. Attach the mounting plate to the junction box using two junction box screws as shown. The side of the mounting plate marked “GND” must face out. The junction box is not included.
  4. This lamp luminary is LED, the manufacturer has been installed.
  5. Guide fixture wires through hole in center of mounting plate.
  6. Follow wiring instructions carefully (see fig.2).
  7. Attach the back plate of lamp body onto the mounting plate, aligning the back plate holes with screw hole of the mounting plate on side, then lock it securely with mounting screws.
    Assembling The Fixture

CONNECTING THE WIRES (Fig.2)

  1. Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
  2. Tuck the wire connections neatly into the wall junction box.
    Connecting The Wires

Your installation is now complete. Return power to the junction box and test the fixture.

CUSTOMER SUPPORT

Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service
at :info@aviancelighting.net
©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.
DOC202403HD59931Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AVIANCE User Manuals

Related Manuals