LIVARNO home 461343_2307 Insect and Sun Protection Window Magnetic Tape Instruction Manual

**LIVARNO home 461343_2307 Insect and Sun Protection Window Magnetic Tape Instruction Manual

**

Installation Instruction

1. Thoroughly clean the inside or outside of the window frame with a mild cleaning agent, depending on the type of installation.

2. Remove the protective films from the self-adhesive magnetic tapes b and c and attach them to the bottom and sides of the window frame. Shorten the magnetic tapes with scissors.

3. Remove the protective films from the self-adhesive Velcro strips d and e and attach them to the top and sides of the window frame. Shorten the Velcro strips with scissors.

4. First attach the fabric a to the bottom and sides of the magnetic strips and then attach it to the Velcro strips d and e while pulling gently. To do this, use the press-in tool g so that the Velcro tape fixes the fabric. Shorten the fabric and the magnetic strips with scissors.

5. Remove the protective films from the two self-adhesive fleece pads j and stick them around the openings of the previously shortened open magnetic pockets.

6. Attach the fleece tapes h and i to the Velcro tapes d and e so that the fabric is fixed between them. Shorten the loop tapes with scissors.

7. Remove the protective foils from the self-adhesive Velcro and fleece pads f and k. Stick the fleece pad k at the bottom in the corner area of the side to be opened. After folding up the fabric, attach the Velcro pad f to the  opposite side as shown so that the fabric can be fixed at this point when open.

• The disposal instructions apply to all enclosed documents.

SMARTMAXX GmbH
Schulzstraße 2c, 85579 Neubiberg, Germany
www.smartmaxx.info
Hotline: +49 89 678 45 06-0
E-Mail: office@smartmaxx.info

References

• Smartmaxx

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>