Easee Ready Plug and Play User Guide
- June 9, 2024
- easee
Table of Contents
Easee Ready Plug and Play
With the Easee Ready docking station, you get a completely electric vehicle (EV) ready charge point at low cost. By pre-installing the charge point, the Easee charger can subsequently be deployed upon demand with our innovative Plug & Play technology. This allows you to easily scale the system with no additional installation cost.
Easy to scale
Benefits
- EV ready charge point at low cost
- Supports the expansion of multiple charging stations on the same cable
- Suitable for both Easee Home and Easee Charge
- Developed and manufactured in Norway
Why choose Easee Plug & Play?
0$
No installation cost
With Easee Ready previously installed, there is no need to pay an additional
cost to install Easee Plug & Play. By following
the instructions, anyone can easily connect the Chargeberry and the front
cover to the backplate. Quick, safe and simple.
10x
Quick charge
With the Easee Charging Robot, you can charge up to 10x faster than with a
regular outlet. It charges as quickly as possible with the available capacity
and provides you with the highest charging power.
10 times faster charge requires a 3-phase installation. With 1 phase you will still get 3 times faster charge.
69%
Small
The Charging Robot is 69 % smaller and lighter than other electric chargers,
with similar functionality. It weighs only 1.5 kg! This means that we save the
environment at least 4 kg of copper and plastic per produced charger.
5x
A colourful choice
We have covers in five different colours; White, Anthracite, Red, Blue and
Black. The choice is yours.
22kW
Full of power
The charger can charge on both 1 and 3 phase and supports charging up to 22
kW. It has a Type 2 standard charging connector which makes it suitable for
charging all types of electric vehicles only by using an appropriate cable.
eSIM
Internet access
All our Charging Robots are connected to the internet through mobile network.
If you buy now you get free mobile internet access throughout the lifetime of
the product. In order to get software updates and increased redundancy, we
recommend installing a local WiFi network, if there is no cellular coverage.
The local WiFi network must be connected to the Internet.
Assuming cellular coverage is available.
24/7
Always updated
The Charging Robot is updated with new features continuously. This way, you
know that you have purchased a safe and future-proof product.
3yr
Warranty
We want you as a customer to have confidence that you have bought lasting
quality. A product from Easee comes
with a 3 year warranty.
Some countries may have extended warranty.
Made in Norway – for Norwegian weather conditions
We develop and manufacture our products in Norway. Our products are developed
for being able to withstand harsh environments. Not only is it tough it is
also small! Our Charging Robot is 69 % smaller than other EV-chargers. It only
weights 1.5 kg. We have strived to contribute to a sustainable future and are
saving the enviroment for 4 kg of copper and plastics per produced charger.
The charger thrives just as well on the outside of a house as inside a garage.
Its components are of high quality and
is composed in a very special way. It is
IP54 certified and designed to withstand the Norwegian climate.
We want you as a customer to have confidence that you have bought lasting
quality. One product from Easee comes with a 3 year warranty.
Feel safe
We’ve added 3 extra levels of security,
so that we can sleep well at night, knowing that you can do it too. Safety is
an important part of the design.
With an Easee Charging Robot you can
be assured that charging is done safely. The Charging Robot is designed to the
latest standards. In addition, there is built-in electronic earth fault
protection that ensures detection of DC and ground faults.
The Charging Robot is also equipped with temperature sensors and protection to
prevent overheating. You also don’t have to worry about crooks, the charging
cable can be permanently locked in the box via the app or the local WiFi
interface.
Easee Ready
Measurement in mm
Technical
General
Dimension (mm): H: 256 x W: 193 x D: 78 Wall mounting (mm): c/c H: 160 x W:
125 Colour: Black
Installation kit included
Wire terminals
Wire cross-section: up to 16 mm2 (single cable)/ up to 10 mm2 (parallel
connection) Cable diameter: 8–22 mm
Terminal torque: 5 Nm
Cable strip length: 12 mm
Installation
Installation network: TN, IT or TT Installation circuit breaker: Max 40 A
(Easee Home) or max 80 A (Easee Charge) overload protection. The short-circuit
current at the charging point (IkMax) must not exceed 10 kA. If required by
the installation, type-A earth fault protection can be used for the circuit.
Protection
Degree of protection: IP44
Impact resistance: IK10
Fire class: UL94
Easee Ready contains
Easee Plug & Play
Measurement in mm
(complete charger measurements)
Technical
General
Dimension (mm): H: 256 x W: 193 x D: 106 Operating temperature: -30 °C to +50
°C Weight: 1.5 kg
Charging
Charging power: 1.4–22 kW
6 A 1 phase – 32 A 3 phase (automatically adjusted in relation to available
capacity) Up to 7.36 kW at 32 A 1 phase
Up to 22 kW at 32A 3 phase (TN grid) Number of phases: 1 or 3 (fully dynamic)
Connection point: Type-2 socket (IEC 62196-2) Voltage: 3 x 400 V AC/ 230 V AC
(±10 %) Mains frequency: 50/60 Hz
Up to 3 (Easee Home) or 101 (Easee Charge) Charging Robots on the same circuit
Load and phase balancing works offline Built-in energy meter (±2 %)
Connectivity
Built-in eSIM (LTE Cat M1/ 2G /GPRS)
WiFi 2.4 GHz b/g/n connection
Easee Link RFTM
Control charging with the Easee app
RFID/NFC reader
OCPP 1.6 via our API
Sensors and indicators
Light strip showing the status of the charger Touch button for manual
adjustment Temperature sensors in all main contacts
Colours
White :Anthracite: Red :Blue :Black
Safety
Protection
Integrated overload protection according to EN IEC 61851-1:2019
Built-in RCD for ground fault protection
(30 mA AC/ 6 mA DC) according to
EN 61008-1 and IEC 62955
Degree of protection: IP54 (the backplate is IP22 without cover)
Impact resistance: IK10
Fire class: UL94
Insulation class: II
Overvoltage category III
Theft protection
Electronics can be deactivated and tracked in case of theft (contact support
if your device has been stolen).
The electronics can be permanently locked using a padlock (not included).
The charging cable can be locked permanently in the charging station.
Complies with the following regulations
2014/53/EU (RED)
2011/65/EU (RoHS)
2014/30/EU (EMC)
2014/35/EU (LVD)
See DoC for details at easee.support
Easee Plug & Play contains
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
The latest version of this publication can be downloaded at
http://easee.support
No part of this publication may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including, but not limited to, copying,
recording, retrieving data, or computer networks without the written
permission of Easee AS.
Easee and all other Easee product names and slogans are trademarks or
registered trademarks of Easee AS. Easee products can be protected by one or
more patents.
All other products and services mentioned may be trademarks or service marks
of their respective owners.
Illustrations of the product and user interface are exemplary and may differ
from the actual appearance.
February 2022 – Version 1.05
© 2020 by Easee AS. All rights reserved.
Easee AS Grenseveien 19
4313 Sandnes, Norway Org.nr: 920 292 046
Easee is distributed and maintained by a network of qualified partners and
resellers. Find more information and your local partner at:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>