BLAUPUNKT WM40U Wireless Microphone Owner’s Manual
- June 3, 2024
- Blaupunkt
Table of Contents
WM40U Wireless Microphone
Owner’s Manual
WM40U Wireless Microphone
Important Notes
- safety and operating instruction should be retained for future reference.
- The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
- Do not install the product in the following areas:
- Places exposed to direct sunlight or close to radiators.
- On top of other stereo equipment that radiate too much heat.
- Blocking ventilation or in a dusty area.
- Areas where there is constant vibration.
- Humid or moist places.
- Do not place near candles or other naked flames.
- Operate the product only as instructed in this manual.
- Before turning on the power for the first time, make sure the power adaptor is properly connected.
For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel. Do not attempt to remove any crews, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.
SAFETY INSTRUCTIONS
-
Read Instructions
– All the safety and operating instructions must be read before the product is operated. -
Retain Instructions
– The safety and operating instructions should be kept with the product for future reference. -
Heed warnings
– All warnings on the product and in the operating instructions should be adhered to. -
Follow instructions
– All operating and users’ instructions should be followed. -
Installation
– Install in accordance with the manufacturer’s instructions. -
Power sources
– This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company -
Water and moisture
– To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar). -
Object and Liquid Entry – Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any objectcontaining liquid on top of the product.
-
Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
-
Replacement parts – When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
-
The highest environmental temperature suitable for this product is 35°C.
-
ESD hints – If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.
-
Battery
a. The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
b. The batteries should be drawn to the environmental aspects of battery disposal.
c. Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:
• Install all batteries correctly, + and – as marked on the apparatus.
• Do not mix batteries (old and new or carbon and alkaline, etc.)
• Remove batteries when the unit is not used for a long time.
ERP2 (Energy Related Products) note
This product with ecodesign complies with the stage 2 requirements of
Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC
regard to standby and off mode electric power consumption of electronic
household and office equipment.
WARNING
This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
- Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
- The appliance is not intended to be operated by means of an external timer or separate remote control system.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
- To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
- Do not place this unit close to a strong magnetic field.
- Do not place the unit on a amplifier or receiver.
- Do not place this unit in a damp area as the moisture will affect the life of electric components.
- If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
- Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
NOTICE
Conformity
Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this
equipment is in compliance with the essential requirement and other relevant
provisions of irective 2014/53/EU. Declaration ofconformity can be obtained
from the product page at www.blaupunkt.com.
Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland,
Phone: +48 22 688 08 00, E-mail: [email protected]
**** Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2012/19/EU. Please
inform yourself about the local separate collection system for electrical and
electronic products. Please cat according to your local rules and do not
dispose of your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative consequences
for the environment and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard(box),polystyrene
foam(buffer) and poly thylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local egulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
Recording and playback of material might require consent. See Copyright Act
1956 and The Performer’s Protection Acts 1958 to 1972.
Many thanks purchase our model, this handheld wireless bidirectional
microphone adopted UHF(ultra high frequency) technology, and includes 16 auto
detection channels to avoid unwanted noise or interference, which provide high
quality sound transmission. Providing 6.3mm and 6.3mm to 3.5mm microphone
convertor, which is vary to connect with your microphone input jack from audio
amplifiers, PA system etc.. It is good choice for Karaoke, group events or
performance activities etc. Please read and reference this manual carefully
before operate the unit. Please keep the manual for future operation
reference.
Control locations
1—Display;
2—Microphone power ON/OFF button;
3—reset button;
4—AA battery compartment;
5—DC 5V input jack;
6— wireless receiver ON/OFF button;| 7—6.3mm Microphone plug;
8—-rechargeable battery compartment;
9—signal LED indicator;
10- charging LED indicator;
11—6.3mm to 3.5mm plug converter;
---|---
Setup
Install battery for microphone: Hold and rotate the tail of microphone in
anticlockwise direction to open up the battery compartment, insert and install
the supplied AA dry battery according to right positive and negative polarity
direction; push the power ON/OFF button to check the display. Then hold and
rotate the tail in clockwise direction to close the battery compartment. The
display will flash when the battery power is low, and off when the power
exhausted.
Charging wireless receiver: The wireless receiver built in rechargeable
battery power. Using the supplied USB cable to connect the receiver with your
USB charger (USB adaptor or USB output port like on PC, USB rating output:
DC5V, max 2A, other USB charger with current between 12A). The connector
should be connected with the DC 5V power jack on the side of receiver, and
another terminal connect with USB charger. Then plug your USB charger into the
household AC power. The charging LED will in red color during charging, and
turns to green after fully charged. Please up-plug the charger after charged.
The receiver will auto off when the battery power exhausted, please recharge
it for using.
Important: We recommend connect the USB charger with rating output spec
at DC 5V/1A, or between 1-2A current USB power. The general USB output on PC
(personal computer) is 5V/500mA (please reference your PC spec for checking).
Use the microphone
Plug the male 6.3mm connector of wireless receiver into the 6.3mm microphone
input jack of your audio device (in case only available 3.5mm microphone input
jack on your device, please use 6.3 to 3.5mm convertor for connection), push
the power on/off button to turn on wireless receiver; Push and power on the
wireless microphone; The microphone will auto pair with wireless receiver
within few seconds. Check and adjust the microphone output volume from your
audio device, then you can start to enjoy the microphone.
LED signal and reset microphone
The microphone can pair with wireless receiver automatically when we power on
both devices. The signal LED indicator will turn to solid blue color after
pairing successful. If not, you can try to reset the microphone base on
following. a. Power off microphone and wireless receiver both, make sure there
have battery power inside. b. Rotate and open up the battery compartment of
microphone, push and power on microphone; press and hold reset button 3
seconds, then the display will flash which means the microphone is ready for
pairing. c. Power on wireless receiver. When the red LED is in stable, and the
blue LED is flash; that is indicating waiting for pairing. d. Short press
reset button from microphone to confirm. Then the display and blue LED will in
stable which means paired successful.
Notes:
a. In case no need use microphone, please turn it off. And take out the
inner battery in case no use for long time.
b. Please do not use the microphone face to speaker, which will cause big
noise.
Trouble shooting
-
Cannot power on microphone or wireless receiver
a. Please check if the battery power was installed properly.
b. Please check if the battery power was exhausted.
c. Please contact service center if the issue still remains. -
Noise or distortion when we talk to microphone
a. Please try to reduce the microphone output volume from your audio device due to overload.
b. Please take the microphone a bit far away for the speaker for talking.
c. Please contact service center if the issue still remains.
Specification
Distance between transmitter and receiver: >10m
Type of frequency band: UHF
Frequency response: 65Hz–18kHz
Signal-to-Noise(S/N) ratio: >85 dBA
UHF frequency band: 640-647.5MHz
THD: <0.3%,
Transmitter transmitting power: <10 mW,
Receiver input: 1/4″ (6.3 mm) unbalanced
Receiver maximum Output Level: 120 dBV,
Receiver rechargeable Battery: Lithium-ion 3.7V, 1200 mAh
Receiver charge time: 2-3 hours @5V/1A
Receiver battery Playtime: Up to 7 hours
Microphone battery: 2 x AA alkaline (included)
Microphone battery Playtime: Up to 3 hours
Microphone wireless transmission distance: 40meters max.
Receiver power source: DC 5V/1A.
Dimensions and Weight
Dimensions (W x H x D):
Microphone 230 x 49 x49 mm
Receiver：25 mm x 56mm x 120 mm
Weight: Microphone 155 g(without battery)
Receiver: 72 g
Competence Center 2N-Everpol Sp. z o.o. ul.
Pulawska 403A 02-801 Warsaw, Poland
phone: +48 22 688 08 00
e-mail: [email protected]
www.blaupunkt.com